• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.96-100
• /
• 2012

Existing, widely used industrial controller programmable logic controller (PLC) using the high cost and maintenance was a difficult problem. In addition, the network configuration was not easy. Thus, the filter press by remote control and management to improve productivity and shorten maintenance time. Variety of smart devices (smart phones, iPad, tablet PC, etc.) Remote control is possible by utilizing the existing controlled by the PLC addresses maintenance and improved performance compared to that of possible filter press control and management system was developed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1139-1141
• /
• 2011

기존의 산업용 컨트롤러로 많이 사용되는 프로그래머블 로직 컨트롤러(PLC)를 사용할시 고비용과 큰 부피로 인해 정수기를 소형으로 만들기 어렵다. 따라서 본 가정용 정수기는 소형 MCU 사용과 동시에 정수기에 최적화된 PCB를 제작하여 정수기를 소형화 하였다. 재 프로그램 가능한 MCU 채택으로 추후 시스템이 변경되거나, 프로그램에 보완사항이 필요할 경우 손쉽게 업그레이드가 가능하도록 설계하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.7-10
• /
• 2002

The diagnosis of faults of machine tool, which is controlled by CNC and PLC, is generally based on ladder diagram of PLC. Because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching for logical relation to fault reasons is required a lot of fault experiences and times, because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault lastly and correctly. The diagnosed reasons for fault are tele-serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.358-361
• /
• 2011

본 논문에서는 ADSL용 아날로그 Front-end의 수신단과 송신단에 활용하기 위한 저전압 특성의 3V CMOS 프로그램머블 증폭기(PGA)를 설계하였다. 설계된 수신단의 PGA는 1.1MHz로 연속시간 저역통과 필터와 연결하여 0dB에서 30dB까지 이득을 조정해주며, 송신단의 PGA는 138kHz의 저역필터와 연결하여 -15dB에서 0dB까지의 이득을 조정할 수 있다. 모든 PGA의 이득은 디지털 로직과 메인 컨트롤러에 의해서 프로그램될 수 있도록 설계하였다. 설계된 PGA는 $0.35{\mu}m$ CMOS 파라미터를 이용하여 Hspice 시뮬레이션으로 그 특성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2327-2329
• /
• 1998

In this paper, an algorithm to make a configuration system for managing the I/O device of programmable logic controller(PLC) is proposed. Parallel processing architecture is used to deal with a number of I/O devices. From that architecture, a contention problem between processors can arise. To resolve this problem, the configuration system that contains informations about I/O devices is introduced. This configuration system is used to check the contention between processors in the I/O device and also used in program execution.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.89-97
• /
• 2003

The faults diagnosis of machine tool, which is controlled by CNC(Computer Numerical Control) and PLC(Programmable Logic Controller), is generally based on ladder diagram of PLC because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching of logical relationship for fault reasons is required a lot of diagnosis experiences and times because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault fast and correctly. The diagnosed reasons for fault are remote serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• Journal of KIISE:Software and Applications
• /
• v.35 no.3
• /
• pp.149-161
• /
• 2008

As Programmable Logic Controllers(PLCs) are frequently used to implement real-time safety critical software, testing of PLC software is getting more important. We propose a structural testing technique on Function Block Diagram(FBD) which is one of the PLC programming languages. In order to test FBD networks, we define templates for function blocks including timer function blocks and propose an algorithm based on the templates to transform a unit FBD into a flowgraph. We generate test cases by applying existing testing techniques to the generated flowgraph. While the existing FBD testing technique do not consider infernal structure of FBD to generate test cases and can be applied only to FBD from which the specific intermediate model can be generated, this approach has advantages of systematic test case generation considering infernal structure of FBD and applicability to any FBD without regard to its intermediate format. Especially, the proposed method enables FBD networks including timer function blocks to be tested thoroughly. To demonstrate the effectiveness of the proposed method, we use trip logic of bistable processor of digital nuclear power plant protection systems which is being developed in Korea.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.753-758
• /
• 2002

In this paper, low voltage 3V CMOS programmable gain amplifier(PGA) for using in the transmitter and receiver of ADSL analog front-end is designed. The designed receive PGA is connected with 1.1MHz continuous lowpass fillet and controls the gain from 0dB to 30dB. And also the transmitter PGA is connected with 138KHz lowpass filter and controls the gain from -15dB to 0dB. The gain of All PGAs can be programmed by digital logic circuits and main controller. The designed PGAs are verified using HSPICE simulation with $0.35\mu{m}$ CMOS parameter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1675-1683
• /
• 2018

This paper is a study on modeling of an NFC antenna to be inserted into a steel pallet for conveying selected good products through a vision system to a threaded screw from CNC equipment. The CNC equipment used here incorporates the information communication technology (ICT) corresponding to the Internet of Things (IoT), and the smart factory system technology that produces information by exchanging information freely in two directions by connecting the POP corresponding to the service Internet is evolved Equipment. Therefore, it is possible to collect position information on the threaded workpiece by applying NFC antenna designed considering iron pallet used for material management so as to grasp estimated completion time and actual production amount according to production instruction from existing analog type equipment to POP monitoring system And investigated its characteristics.