• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.367-370
• /
• 2009

Recently, ultra high strength products can be manufactured by the hot press forming process of Boron steel in automotive and electronics industries. In order to get high strength, the hot press forming should be accompanied by quenching process inducing phase transformation. In the study, the heat conductive die and the cooling channel were designed by the numerical simulation and the effect of three different parameters were determined to improve cooling characteristics.

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.38-50
• /
• 1994

Fundamental deformation mechanism and plastic behavior of AISI304 austenitic stainless steel were investigated to evaluate press formability. Local and uniform deformation capacity of AISI304 steel were compared to those of ferritic AISI430 steel and Al killed low carbon steel. Nine kinds of austenitic stainless steels having different austenite stabilities were made in laboratory scale to examine the transformation behavior in various deformation mode and variation of mechanical properties. Deformation path and strain distributions along edge corner of commercial sink die were illustrated and effect of austenite stability on press forming of sink die was clarified with experiments using square cup drawing tools.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.95-100
• /
• 2012

In this study, a novel Cu composite sheet with embedded high electric conduction path was developed as another alternative for the interconnect materials possessing high electrical conductivity as well as high strength. The Cu composite sheet was fabricated by forming Ag conduction paths not within the interior but on the surface of a high strength Cu substrate by damascene electroplating process. As a result, the electrical conductivity increased by 40% thanks to mesh type Ag conduction paths, while the ultimate tensile strength decreased by 20%. The interfacial fracture resistance of Cu composite sheet prepared by damascene electroplating increased by above 50 times compared to Cu composite sheet by conventional electroplating. For feasibility test for practical application, a leadframe for LED module was manufactured by a progressive blanking and piercing processes, and the blanked surface profile was evaluated as a function of the volume fraction of Ag conduction paths. As Ag conduction path became finer, pressing formability improved.

• Transactions of Materials Processing
• /
• v.9 no.3
• /
• pp.257-264
• /
• 2000

In this study, optimization for press forming condition of low arm was performed with explicit dynamic FEM code, Pam-Stamp. FEM simulation was coupled with the Taguchi's experiment technique having three design variables - friction coefficient, plastic anisotropy parameter, and blank shape - which are chosen to be optimized. The simulation results were compared with those of experiment. We found out the change of blank shape among these three design variables is very effective in optimizing press forming condition of low arm. In addition, the modified blank shape shows high yield of slitting coil.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.1018-1024
• /
• 2013

In the process of draw die design for stamping automotive press panels, the addendum surfaces generated in metal forming simulation software cannot be used in downstream processes such as machining and making draw dies because simulation tools use simple discrete models for the surface geometry. The downstream processes require more precise and continuous geometric models such as NURBS surfaces. Generally, automotive die engineers manually regenerate the addendum surface geometry using the discrete model. This paper presents an automated geometric modeling process for generating addendum surfaces using draft surface models. The design parameters of the section curve for the addendum surfaces are extracted automatically from the draft geometry. Using the extracted design parameters, smooth addendum surfaces are generated automatically as NURBS surfaces. The generated surfaces are $G^1$ continuous with the part surface and the binder surface, and can be used in downstream processes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.80-91
• /
• 1994

This study aims detecting forming defects for the forming process of bearing rings, which is designed by an industry expert. The designed process consists of one forming operation for the outer ring and four operations for the inner ring. The thickness of the sheet used is 1.6mm, and is in between of thin sheet and bulk material. Here the rigid-plastic finite element method is applied to the analysis and design of the process without considering anisotropy of thin sheet. Thinning and folding defects are detected if the initially designed process is applied for manufacturing. so a new process is designed by referring the results of the FEM. It is confirmed that the industry expert agree the possibility of defects derived from FEM results.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.189-201
• /
• 1994

This study aims detecting forming defects for the forming process of bearing rings, which is designed by and industry expert. The designed process consists of one forming operation for the outer ring and four operations for the inner ring. The thickness of the sheet used is 1.6mm, and is in between of thin sheet and bulk material. Here the rigid-plastic finite element method is applied to the analysis and design of the process without considering anisotropy of thin sheet. Thinning and folding defects are detected if the initially designed process is applied for manufacturing. So a new process is designed by referring the results of the FEM. It is confirmed that the industry expert agree the possibility of defects derived from FEM results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.357-364
• /
• 2004

합금화용융아연도금강판(GA)은 가격이 저렴하고 내식성 및 용접성이 우수하여 최근 자동차용강판으로 그 사용량이 급격하게 증가하고 있으나 도금밀착성이 나쁘고 프레스성형이 떨어지는 단점을 가지고 있다. 본 연구에서는 GA 도금층에 여러가지 유,무기계 윤활처리를 실시하여 이것이 마찰특성은 물론 용접성, 도장성 및 내식성에 미치는 영향을 평가하였다. 유기계 윤활피막은 가공성과 도금 밀착성에서 유리하나 용접성과 탈지성에서는 불리하였고, 무기계 윤활피막인 Prephosphate 및 금속윤활처리 강판은 가공성에서는 유기윤활피막 보다 약간 떨어지나 용접성과 탈지성에서는 우수한 결과를 나타냈다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.55-58
• /
• 1997

In automotive industries, stamping of laser-welded blank gives many merits which brings about dimensional accuracy, strong body assembly and high productivity. However the welding of blanks with different thickness or/and different strength materials introduces many challenging formability problems for process development and tool design. In this paper, the deformation characteristics for deep drawing process of laser-welded blank with different thickness sheets are investigated by experiment and FEM simulation. And also the optimal location of weld line in laser-welded blank with different thickness sheets is calculated to compensate for the movement of weld line on deep drawing process. In addition, the effect of location of weld line is clarified using FEM simulation.