• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.128-138
• /
• 2002

Waste recyling is a very important concept with waste minimization in the waste managment. Especially, recycling waste from the point of environmental and economical view is useful. The recycling part of package waste needs to continuously grow. But, cosmetic container, which is continuosly increased as waste. The difficulty of waste treatment in cosmetic industy produces complicated environment problem. Cosmetic container is difficult to recycle because it mostly made of complex material. Also, cosmetic container is difficult to separate I source and thus usually are generated mixed waste. In this study we performed an analysis on the Recycling Improvement method of a Cosmetic Container The result of this study could be summarized as follows 1) As a part of law and a system improvement, must be achieved Improvement Cosmetic law, Deposit refund system. and charge system, Technology development for recycling of a cosmetic container, Extension of refill productions, Recovery system establishment of a cosmetic container and inducement of a maker's recycling paticipation. 2) As a part of a cosmetic container design improvement, must be achieved simplification and standardize of container's cuality, Cosmetic life cycle extension, Selection of recycling materials and Cosr reduction of a cosmetic container. In conclusion, To the recycling improvement of a cosmetic container, must be achived collective development of system improvement, participation of the government and company and a consumer's recycling consciousness. Most of all, A company need to try to recycling container development of a cosmetic container.

• The Journal of Society for e-Business Studies
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2017

Though digital imaging devices such as smart phones, digital cameras and office scanners have improved significantly over the past years, they are seldom used for industrial application. This may be attributable to high level of quality and performance requirement for industrial application, but there lacks a test or an objective evaluation whether the upgraded performance of entry-level device is sufficiently enough to replace existing industrial equipments or not. If there exists an industrial application area where the applicability of entry-level equipment is proved by some objective tests, then companies will be able to reduce investment on expensive industrial equipment. In this study, applicability of entry-level digital devices for color difference discrimination of PVC (Polyvinyl chloride) color sheet is tested. By testing smart phone, digital camera, and office scanner for color difference discrimination, authors have found that office scanner shows consistent result with less measurement error. Additional experiment on comparing office scanner with industrial spectrophotometer has confirmed that there exists high correlation between the two devices' results. Based on this result, office scanner may be applicable to discriminate the color difference of PVC sheet instead of expensive industrial spectrophotometer if proper management criteria are established.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.429-436
• /
• 2017

A design thinking-based collaborative workshop in which various stakeholders in the milk processing industry circulation ecosystem participated shows a new problem innovation paradigm that encourages the spread of practical prototyping culture. in the expression of empathy and collective intelligence among members on facing issues, the conversion of collaboration and communication methods, the business handling of the organization based on the design work method as 'creativity mechanism'. In this workshop, which was promoted in three stages of 'approach to problems', 're-definition of problems', and 'experience-based future vision design', participants themselves redefine real problems in terms of the accuracy of feed orders between feed suppliers and livestock farmers, ordering of feeds on time, cost reduction of feed supply and present new alternatives and expanded business areas. The results suggested in this workshop suggest the usefulness of design thinking in business innovation in that they presented how to approach the problem and a creative thinking system to find its solution to direct and indirect stakeholders of the industry as well as the improvement of supply and demand rate of livestock feed and quality.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.43-49
• /
• 2017

The purpose of this study is to study the standardization of the core business process in the chemical manufacturing industry and to establish a production information management system for the purpose of establishing the production information management system that can achieve mid -To be applied. The development methodology for the standardization of the chemical manufacturing information system is applied to the production information management system development methodology (PSDM) that was developed and developed by the Agency for Technology and Information Promotion of Small and Medium Enterprises. The standardization target is the system structure, It is a core business process that becomes a skeleton during construction. In this study, the chemical manufacturing SMEs and related professional IT companies who want to build the production information management system can apply the standardized core business process more effectively to build the system more effectively, and provide ease of installation and reliability to the system, In order to maximize the utilization of processes, follow-up education training and maintenance measures are suggested. Applying the results of this study, it is possible to eliminate the unreasonable elements of the production process, improve the quality of production product, and reduce production cost.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.307-316
• /
• 2015

Although the use of CAD and CAM technologies has been broadly adopted by architecture-engineering- construction-facility management (AEC/FM) industry as the means of producing complex forms, there are still remained issues such as reducing cost, and enhancing quality and manufacturability. In this paper, to resolve given issues, we suggest a process of rationalization in digital architecture design and fabrication as an integrated approach. The rationalization, which is usually used as the term related with the skin panel of free-form architecture, is a process of re-designing a digital model to meet the requirements of manufacturing considering the gap with an original designs. Thus we classified this process and conducted a case study of fabricated models as an exploratory study. As the result, we found that each phase is connected with other phases with the circulation of information and rationalization process can be determined as the circulative process which re-designs digital model by minimally deviating from the original design based on the information deducted from analysis of inter-compatability of software and requirement of hardware.

• Journal of the HCI Society of Korea
• /
• v.3 no.1
• /
• pp.19-26
• /
• 2008

In the medical environment today, new technology has compelled new work paradigm, as it has been other areas of our lives. However it is very difficult to see the changes that have been taken place, even though new computer technology has changed the medical industry so rapidly. In this study, new concept of human computer interaction focusing on tangible interaction for anaesthetic procedure in an operating theatre has been explored with a 5 years technological and social perspective. This project is not intended to redesign the equipment itself but to focus on enhanced human computer interaction concepts. The exper iment shows that how new technology affects anaesthetic nurses' work in an operating theatre in the near future to improve quality of the medical service by helping to increase work efficiency and enhance patient satisfaction. As a result of the study, the KEY brings new visions to the anaesthetic nurses via various types of interaction. Thanks to the KEY, the nurse is really free from the machines so that he can keep attention to patient most of the time during the whole operation. The discussion in this study is still preliminary, and further elaboration is strongly needed. It might be certain that additional further studies, such as high-fidelity prototyping and logistical user testing, should be followed not only to refine and communicate the ideas to audiences, but as a means of stimulating and generating further ideas.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.249-255
• /
• 2017

The domestic tourism industry mostly relies on quantitative surveys for customer satisfaction. However, customer participation of the questionnaires is extremely low and the improvement of the dissatisfactory factors is not being performed promptly. In this paper, we propose a new topic map system and prove its empirical effectiveness to improve the accuracy of customer feedback information and the efficiency of the analysis process. The topic map system is a system for analyzing large amounts of customer feedback data in real time. It uses text mining and ontology techniques by integrating data collected over a certain period from real-time SNS and quantitative data obtained from existing survey systems. The effect after improving the analyzed factors of dissatisfaction is also a new and innovative evaluation system for monitoring customer satisfaction in real time. The classification based on this integrated data is a classification system that is specific to the product or the customer. According to this classification, it is possible to measure the effect of the recognition and improvement of the complaint factor in real time on the topic map system. This provides a sophisticated prioritization of the improvement factors and enables customer satisfaction quality control as a PDCA feedback system. In addition, the survey period and costs are greatly shortened, and responses can be more precise to the existing survey method. As a practical application, this system is applied to the largest H travel agency in Korea to prove the accuracy and efficiency of the proposed system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.473-476
• /
• 2008

Due to the pursuit of high function and international price increase in the field of construction, the application of the secondary product using cement is on the increase gradually in the construction industry in the pursuit of economic cost reduction by the shortening of the construction time like Expediting and the dry construction method at the same time. However, it is in very urgent situation of measures to improve the structural performance or durable performance because it is limited for use in terms of panel in interior exterior building or functional repair reinforce as yet. Accordingly, this study is to investigate applicability of permanent Formwork like mould with the structural performance or excellent durable performance in the field of construction, and to derive optimum mixture in the performance and quality of manufacture. As a result of analysis comparison with the dynamic and durable properties of vacuum extrusion molding high toughness cement panel according to the mixture of four conditions, this study has found that the test body of mixing ECC-DP3 using small filler and large granulated blast furnace slag and powder flame retardant had excellent relative hardness and bending stress strain. The durable performance has shown excellent tendency by the decrease of porosity and enhancement of water-tightness.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.91-101
• /
• 2009

The factors of uncertainty such as work delay could cause many problems, for example, increase of construction cost and terms of work, and the deterioration of quality. Because of these, the uncertainty risk is regarded as an important management factor to obtain the success of construction project. So, the systematic management plan about the uncertainty factors is needed because it plays an important role in the completion of entire project. And also analysis of some factors which can cause the work delay can be one way of improving construction project's certainty and making it competitive. In this reason, we have to make an effort to set a priority based on analysis of quantitatively numerical value about work delay factors to manage them effectively. Thus, this study aims to suggest the basic data for the effective management and prevention of work delay in steel-frame work which is progressive actively now, along with increasing of demand of high-rise buildings by analyzing each reasons of work delay factors and also by suggesting important management factors that are coded according to each construction work using FMEA method which could give a data about the importance of work delay factors through quantitatively numerical value.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.23-34
• /
• 2014

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.