Browse > Article
http://dx.doi.org/10.9728/dcs.2015.16.2.307

Rationalization Process for Digital Design and Fabrication -Based on the Case of Fabricating Interior Panels-  

Chang, Soo-Jung (Hanyang University, Dept. of Interior Architecture Design)
Lee, Hyun-Soo (Hanyang University, Dept. of Interior Architecture Design)
Lee, Jin-Kook (Hanyang University, Dept. of Interior Architecture Design)
Publication Information
Journal of Digital Contents Society / v.16, no.2, 2015 , pp. 307-316 More about this Journal
Abstract
Although the use of CAD and CAM technologies has been broadly adopted by architecture-engineering- construction-facility management (AEC/FM) industry as the means of producing complex forms, there are still remained issues such as reducing cost, and enhancing quality and manufacturability. In this paper, to resolve given issues, we suggest a process of rationalization in digital architecture design and fabrication as an integrated approach. The rationalization, which is usually used as the term related with the skin panel of free-form architecture, is a process of re-designing a digital model to meet the requirements of manufacturing considering the gap with an original designs. Thus we classified this process and conducted a case study of fabricated models as an exploratory study. As the result, we found that each phase is connected with other phases with the circulation of information and rationalization process can be determined as the circulative process which re-designs digital model by minimally deviating from the original design based on the information deducted from analysis of inter-compatability of software and requirement of hardware.
Keywords
Digital Fabrication; Rationalization; Integrated Process;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Cho Minjung., "A Study on the Implementation ofIntegrated Digital Design Process for Representation and Construction of the Exterior Surface in Free-Form Architecture". Journal of digital design, Vol.11, No.2, pp.267-276, 2011.
2 Bae, Kyung-Jin., Lee, Sang-Heon. and Jun, Han-Jong., "A Study on Digital design process of the materialization of Free form Design architecture", Proceeding of Annual Conference of the Architectural Institute of Korea, Vol.29, No.1, pp.221-224, 2009.
3 Sass, L., and Oxman, R., "Materializing design: theimplications of rapid prototyping in digital design. Design Studies", Vol.27, No.3, pp.325-355, 2006.   DOI   ScienceOn
4 KOLARE.VIC, Branko (ed.), "Architecture in the digital age: design and manufacturing". Taylor & Francis, 2004.
5 Lee, Ghang., "Construction Issues of Irregular-Shaped Buildings". Review of Architecture and BuildingScience, Vol.52, No.4, pp.63-65, 2008.
6 Park, Jung-Dae., "Digital technology and architectural design process on the construction of curved forms". Ph.D. dissertation Seoul National University. Seoul, Korea, 2005.
7 Lee, Sang-Pil., Jeon, Young-Hoon. and Choi, Yoon-Kyung., "A Study on the Tectonic in the Digital Technology", Journal of the Architectural Institute of Korea, 23(8), pp.135-142, 2007.
8 Oh, Kun-soo., Song, Jeong-Hwa., and Kim, Kyung-Hwan., "Development of an Evaluation System forBIM-based Friendly-Environment Preliminary Certification." Journal of Digital Contents Society, 13(4),pp.483-490, 2012.   DOI   ScienceOn
9 Park, Jung-Dae. and Kim, Jin-Kyun., "A Study onDigital Design Process in Frank O. Gehry's Architecture", Journal of the Architectural Institute of Korea,20(10), pp.173-182, 2004.
10 Park, Jung-Dae., "A Study on Digital Technologyfor the Construction of Curved Forms", Journal ofthe Architectural Institute of Korea, Vol.21, No.12,pp.183-192, 2005.
11 Lyu, Ho-Chang., "Characteristics of Digital Tectonics of Free-form Structures designed through Digital Process", Design Forum, Vol.25, pp.225-236, 2009.
12 Park, Jung-Dae., "A Study on the Paradigm Shiftin Digitally-Driven Architectural Design Process", Journal of the Architectural Institute of Korea, Vol.22, No.1, pp.121-130, 2006.
13 Seely, J. C., "Digital fabrication in the architecturaldesign process" (Doctoral dissertation, Massachusetts Institute of Technology), 2004.
14 Lee, So-Youn. And Lee, Nak-Woon., "Characteristics of Design Process on the Digital Architecture", Research report the institute of industrial technology, Vol,25, No.B, 2005.
15 Han, Ji-Yeon., Kim, Dong-Hyun. and Park, Jung-Dae., "A Study on the Classification and its Featuresof Fabrication Types in Realizing Double-curved Surface of Free Form Architecture", Journal of the Architectural Institute of Korea, Vol.29, No.12, pp.3-14, 2013.
16 Willis, K. D., Xu, C., Wu, K. J., Levin, G., & Gross,M. D., "Interactive fabrication: new interfaces fordigital fabrication", In Proceedings of the fifth international conference on Tangible, embedded, and embodied interaction,pp.69-72, 2011.
17 Hwang, Doong-Wook., "Architectural Design through Digital Fabrication", Review of Architecture and Building Science, Vol.58, No.2, pp.10-16, 2014.
18 Benhabib, B. "Manufacturing: design, production,automation, and integration". CRC Press, 2003.
19 Agkathidis, Asterios, "digital manufacturing in design and architecture", Spacetime, Seoul, pp.4-135, 2010.
20 KOLAREVIC, Branko., "Digital fabrication: manufacturing architecture in the information age", Proceedings of Association for Computer Aided Design inArchitecture, Buffalo, New York, 2001.
21 Iwamoto, Lisa., "Digital Fabrications-Architecturaland Material Techniques",Spacetime, Seoul,
22 http://krdic.naver.com/detail.nhn?docid=41683800
23 Pottmann, H., "Architectural geometry as design knowledge", Architectural Design, Vol.80, No.4, pp.72-77, 2010.   DOI
24 Pottmann, H. "Architectural Geometry and Fabrication-Aware Design", Nexus Network Journal, Vol.15, No.2, pp.195-208, 2013.   DOI   ScienceOn