• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.96-105
• /
• 1998

소프트웨어 재사용 분야에 있어서 우선적으로 연구되어야할 부분은 소프트웨어 부품의 품질 보증에 관한 연구이다. 그러나 기존의 연구들은 사용자 요구의 복잡, 다양화와 소프트웨어 복잡도증가등과 같은 변화하는 환경에 능동적으로 대처하지 못한다. 따라서, 본 논문에서는 재사용되고 있는 부품들, 정량적인 척도을과 분류 기준들을 이용하여 변화하는 환경에 능동적으로 대처할 수 있는 적응성이 있는 재사용성 결정 알고리즘 생성 모델을 제안한다. 이 모델은 적응성 있는 재사용 결정 알고리즘을 찾기 위해서 데이터의 숨겨진 패턴들을 발견하는 효율적인 알고리즘을 제고？는 러프 집합 이론을 이용한다.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1511-1514
• /
• 2005

최근 부각되고 있는 기업 업무 프로세스 통합을 위해 EAI(Enterprise Application Integration) 시스템을 도입하고 있다. 하지만 아직 EAI 시스템의 품질을 보증하기 위한 테스트 방법이 제공되고 있지 않는 실정이다. 본 논문에서는 EAI의 기능을 이루는 요소별로 분리하고, 각각 분리된 기능별로 테스트를 수행하는 방법을 제시하고자 한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.115-124
• /
• 1993

In this study, as one of the methodologies for supplementing the deficiencies which are likely to happen in implementing the Joint Research and Development Project we suggest the Quality Assurance System applicable through analyzing the cases. In Quality Assurance System in implementing the Joint Research and Development Projects, the mutual review & approval method for the output by stages, technology interchange method, the frequent meeting among engineers, the test plan and the configuration management system should be provided.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2010

In the field of healthcare, the conventional sterilization treatments have been replaced by irradiation methods which are in accordance with internationally well established quality standards. The quality control in radiation sterilization assures that the absorbed dose of the irradiated material is in agreement with its requirements and standards. The electron beam irradiation requires technical assessments of more process parameters than gamma irradiation does. Korea has witnessed wide uses of electron accelerators since early 2000 but there hasn't been research experiences relating to quality system in accordance with international standards. The new large scale e-beam irradiation system with the specification of 10 MeV, 8 kW was installed and operated in 2008 by Seoul Radiology Services Co. It consists of the electron accelerator, product handling system, safety, documentation and control subsystems into an integrated system to meet the requirement of the Good Manufacturing Practice such as process quality assurance and management of product tracking records. To implement the international standard such as EN ISO11137, it is necessary to understand the purposes aimed in the standard and carry out the tests following the procedures required. This study presented the specification of the e-beam facility and showed what its design requirements and features are. The test results on a variety of process parameters were presented and validated it they are within the required limits.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.869-874
• /
• 2005

In the recent years there has been an increase of service competition in the activity of product selling, especially in the extension of warranty coverage and qualify. The variables in connection with the service competition are not crisp, and required the expertise of the production line. It thus becomes all the more necessary to use subtler tools as decision supports. These problems are typical not only of product companies but also of financial organizations, credit institutions, insurance, which need predictions of credibility for firms or persons in which they have any kind of interest. A suitable approach for minimizing the risk is to use a knowledge-based system. Most often expert systems are not standalone programs, but are embedded into a larger application. The aim of this paper is to discuss an approach for developing an embedded fuzzy expert system with respect to the product selling policy, especially to present the decision system of automobile selling activity around the extension of warranty coverage and quality. We use the MATLAB tools which integrates computation, visualization, and programming in an easy-to-use environment where problems and solutions are expressed in familiar mathematical notation. Also, we present the API functions embedding into the existing application.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.133-141
• /
• 2010

The evaluation of Varian enhanced dynamic wedges (EDW) were performed in terms of quality assurance in external radiotherapy. The seven (10, 15, 20, 25, 30, 45, 60 deg.) EDW angles were evaluated for 6 and 15 MV x-rays in Varian Linac. The STT (segmented treatment table) for a field were calculated and compared with actual movement of the jaw using Dynalog files in order to evaluate mechanical operation. Two dimensional array detector and an ionization chamber were used to measure dose distributions in phantom from Linac. The mechanical movement of jaw was agreed with its expectation and two dimensional dose distributions including beam profiles were in agreement with RTP data approximately. In comparison with RTP calculations the percentage difference of output dose values for 100 MU irradiation was less than 2.9% and measured wedge factor was less than 2.6%. These results are shown that there is no problem in clinical applications of EDW equipped on this linac.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.165-183
• /
• 2001

지난해부터 인터넷 분야에서 가장 확실한 수익 모델을 갖춘 사업 분야로 e-Learning 분야가 손꼽히면서 많은 온라인 교육 서비스가 우후죽순처럼 등장해 이미 1,000여 개의 서비스가 각축을 벌이고 있다. 그러나 e-Learning은 무엇보다도 학습용 컨텐츠의 품질이 그 성패를 좌우한다 할 때 한국의 온라인 학습 컨텐츠의 품질은 부실하기 이를 데 없다는 게 중론이다. 이는 S/W 공학에서 S/W 품질 보장을 위해 개발 방법론이 중요한 것으로 인식되는 것과 이를 지원하기 위한 Method II등 여러 도구들이 보급되고 있는데 비해 학습 컨텐츠는 그 중요도와 개발이 복잡하고 정교함이 요구됨에도 불구하고 개발 방법론에 대한 인식과 개발방법론을 지원하기 위한 도구가 없음에 기인하는바 크다 할 수 있겠다. 아직까지 국내에서는 MacroMedia Director나 ToolBook, Authorware등 일반적인 저작 도구나 웹 기반의 컨텐츠를 제작하는 Dreamweaver등의 HTML Editor만 있으면 컨텐츠가 만들어 질 수 있는 것으로 착각하고 있는 경우가 많다. 교육 학습용 컨텐츠의 개발 주기를 살펴보면 요구 분석->교수 설계->저작->평가->배포의 단계를 거치게 되는데 이때 학습 컨텐츠의 품질은 사실 요구 분석과 교수 설계 단계에서 결정되게 되며 이 학습 컨텐츠의 품질을 결정하는 단계에서는 IT 분야 지식보다는 오히려 교육 공학적 지식이 더욱 요구된다. 그러나 현실적으로 이 단계의 절차적 복잡성과 전문성으로 인해 거의 대부분의 학습 컨텐츠들이 제대로 개발 주기를 거치지 못하고 검증되지 않은 스토리 보드에 의한 저작 단계로 바로 돌입하고 있는 것이 한국의 실정이라 하겠다. 따라서 본 프로젝트에 의해 개발 된 교수 설계 도구는 교육/학습 컨텐츠의 품질 보증을 위한 방법론인 교육 공학의 체제적 교수 설계 이론 Model (Instructional System Design Model), 특히 그 중에서도 이 분야의 사실상의 표준 이론(de facto standard)인 Dick & Carey 교수와 Gagne 교수의 인지주의 ISD Model을 기반으로 정교한 교수 설계와 코스 맵 설계를 가능하게 함으로써 학습 컨텐츠의 품질 보증 활동을 지원 할 수 있는 도구로 개발하였다. 특히 Linux 기반에서 PHP로 개발 함으로써 Platform에 구애받지 않은 사용 환경을 구현 하였으며 향후 많은 e-Learning Platform에 교수 설계 모듈로 장착 함으로써 기존의 e-Learning Platform들의 가치를 높일 수 있는 계기가 될 것으로 생각한다.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2021

Requirements engineering can be seen as proceeding with various processes and activities such as extraction, analysis, specification, management, and verification without temporal and spatial constraints in the development environment of information systems that are becoming large and decentralized. Developing requirements well and conducting continuous evaluation and management is the shortcut to success in project management, and it is recognized as a very important matter in relation to requirements in the information system audit. When we conduct information system audit and conducting projects subject to audit, we need to improve the required engineering aspect. Therefore, this study derives inspection items suitable for the target project by referring to the audit inspection manual and audit inspection guide when conducting the current audit, and relates to the required engineering aspect among the contents of the inspection guide for each business type that is the basis for deriving the inspection items were derived for each audit point/audit area for the project management and quality assurance project type corresponding to the inspection items. The suitability of the extracted occupation items was verified through a questionnaire survey by experts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.405-414
• /
• 2017

In this study, a survey for a satisfaction evaluation of the Test Report Information Service (TRIS) was conducted. A survey questionnaire on modified Information System Success Model(ISSM) of Delone and Mclean was carried out by 183 users in three groups, such as munition quality assurance agency, munition corporation, and test institute. As a survey result, training on the TRIS was in strong demand in all three groups. An understanding and proficiency of the overall system were different from the work process of each user group. In addition, the munition quality assurance agency needs to enhance the system function with its characteristics. Test institute has necessity of the linkage method with the TRIS depending on the authentication system. User groups are different in the operational method of TRIS between the contractor and cooperation. Accordingly, cooperation needs to be educated continually. This study can help in the construction of a Military Quality Integration Information System to secure the reliability of munitions.

• 기계와재료
• /
• v.21 no.3
• /
• pp.6-19
• /
• 2009

소비자의 요구수준 향상으로 제품의 구조 및 성능이 점점 복잡해지고 부품수는 증가함에 따라, 시스템을 구성하는 부품의 고장발생으로 인한 경제적 손실예방, 안전성 확보 등을 위하여 신뢰성 중심의 종합적인 품질보증에 대한 요구가 점점 증대되고 있다. 본 글에서는 이러한 구성부품의 신뢰성 제고를 위하여 신뢰성평가센터가 2000년부터 현재까지 약 10년 동안 지속적으로 수행하고 있는, 기본 성능시험을 비롯한 내환경성시험, 안정성시험, 수명시험 등의 종합적이고 체계적인 신뢰성 시험평가와 신뢰성인증 시스템에 대하여 고찰하고, 그 과정에서 독창적으로 정립한 13단계의 한국적 신뢰성 인증기법에 대해 설명하고자 한다.