• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.228-229
• /
• 2006

본 연구에서는 초음파 모터 등의 고출력 액츄에이터에 응용 가능한 $04Pb(Ni_{1/3}Nb_{2/3})O_3-6Pb(Zr_xTi_{1-x})O_3$ 조성시스템에 소결온도를 달리하여 압전, 유전특성 및 미세구조에 관해 고찰하였다. 본 조성을 $1200^{\circ}C$ 온도에서 2, 4, 6, 8시간 소결하여 시편을 제조하였으며 이의 결정구조 및 미세조직을 분석하였다. 소결시간 증가에 따라 전기기계결합계수와 기계적품질계수는 증가하였으며, 압전상수는 Zr(Zr+Ti)비 0.390까지 증가하였으나 그 이상 증가함에 따라 감소하였다. 압전특성은 $1200^{\circ}C$에서 4시간 소결한 Zr=0.390인 조성에서 ${\varepsilon}_r$ = 4487, $k_p$ = 0.72. $d_{33}$ = 710, $Q_m$ =109의 우수한 특성을 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.153-155
• /
• 2001

본 논문에서는 유한 요소법을 이용하여 계산한 압전체의 임피던스 및 기계적인 변위값을 실험적으로 검증하였으며 이를 압전 변압기에 적용하여 압전 변압기의 공진 특성 즉 전기적인 임피던스 및 공진 모드를 해석하였다. 압전 변압기가 공진 모드에서 동작될 때 압전체의 손실을 결정하는 인자인 기계 품질 계수($Q_m$) 및 유전 손실 인자( $tan{\delta}$)를 유한 요소법을 통해 계산하였으며 이를 이용하여 압전 변압기의 기계적인 진동에 의한 손실 및 유전 손실을 계산하였다.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.63-72
• /
• 1984

1 . Some components associated with mildness, taste, and aroma were set. It was supposed that the three factors contribute to equally the evaluation of tobacco quality. Following equation of quality index was provide. $Q_{pr}\;=\;=0.815\;f_1+8.224f_2+1.858f_3$ where $f_1$ = Reducing sugar (%)/cellulose (%) $f_2=\frac{1}{Total N (%) + Protein (%) + Citric acid (%)}$ $f_3$=Key aromatic compounds ($mg/10g$) 2. The coefficient of correlation between the grades by visible criteria and the values of the quality index for Korean flue-cured tobacco was $\tau$=-0.689 (n=29)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.94-94
• /
• 2009

전기 에너지를 기계적 에너지 변환하고 또한, 기계적 에너지를 전기 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파모터, 센서등과 같은 응용분야에 넓게 사용되고 있다. 특히, 압전 변압기의 설계와 제조방법에 대해서는 이미 상당히 많은 연구가 수행되어 왔다. 특히, 전원장치에 있어서는 현재 주요부품으로 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로서 누설손실이 없는 압전세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구가 국내외적으로 활발히 진행 중이다. 하지만 지금 까지 널리 사용된 PZT계 압전 세라믹스는 환경문제에 있어서 문제점을 가지고 있다. $1200^{\circ}C$ 이상에서 소결되는 PZT계열의 압전세라믹스 소재를 사용한 전자부품의 60~70%이상이 PbO로 구성되어 있기 때문에 $1000^{\circ}C$ 부근에서 급격한 휘발특성을 보이는 PbO로 인한 환경오염문제가 대두되고 있다. 압전변압기, 초음파모터등에 사용될 수 있는 무연계 압전재료 중에 PZT 압전소자의 기능을 대체할 만한 물질로는 높은 큐리온도와 우수한 압전특성을 보이는 $(Na,K)NbO_3$세라믹스가 가장 유력한 것으로 알려져 있다. 즉, 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계 결합계수($k_p$)가 커야 되며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수($Q_m$)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커, 압전변압기의 출력측 정전용량을 크게 하여야 한다. 본 연구에서는 무연계 압전세라믹스를 개발하고, 이를 이용한 전력밀도(power density)가 높은 무연계 압전변압기를 제작하여 그에 대한 전기적 특성을 조사하였다. 따라서 본 연구에서는 무연 압전변압기용 압전 세라믹스를 개발하기 위해 뛰어난 압전 및 유전특성을 가진 무연$(Na,K)NbO_3$계 세라믹스를 기본조성으로 하였고, KCN을 복합 첨가하여 볼 변화에 따른 미세구조, 압전 및 유전특성을 조사하고. 가장 우수한 조성으로 비납 압전변압기를 제작하여 전기적특성을 조사하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.17-22
• /
• 2004

The microwave dielectric properties of $CaZrO_3$ ceramics with addition of $CaTiO_3$ were studied. The effect of glass addition on the low-temperature sintering and microwave dielectric properties of $CaZrO_3-CaTiO_3$ ceramics were also evaluated to develop the materials for functional substrates of low-temperature co-fired ceramics. When $10-20 wt\%$ of lithium borosilicate glass was added, the sintering temperature of the $CaZrO_3-CaTiO_3$ ceramics decreased from $1450^{\circ}C$ to below $900^{\circ}C$. As the $T_f$ of glass frits and $CaZrO_3$ are slightly negative and that of $CaTiO_3$ is significantly positive, zero $T_f$ could be realized by mixing an appropriate amount of $CaTiO_3$ with $CaZrO_3$. The $CaZrO_3-CaTiO_3$ ceramics sintered at $875^{\circ}C$ with $15wt\%$ glass frits showed the relative density of $98\%$, permittivity of 23, quality factor of 2500 GHz, and temperature coefficient of resonant frequency of $ -3 ppm/^{\circ}C$.

• Korean Journal of Crystallography
• /
• v.17 no.1
• /
• pp.24-32
• /
• 2006

The microwave dielectric properties of $Zn_3Nb_2O_8\;with\;V_2O_5$ addition were investigated. The addition of $V_2O_5$ enhanced the sinterability of $Zn_3Nb_2O_8$, which resulted in high density of $Zn_3Nb_2O_8$ ceramic greater than 95% of the theoretical value when sintered at $900^{\circ}C$ for 4 hours. X-ray diffraction analysis of sintered $Zn_3Nb_2O_8$ ceramic showed no second phase with $V_2O_5$ addition. Dielectric permittivity(${\varepsilon}_r$) and quality factor($Q{\times}f$) varied with both density at different sintering temperature and $V_2O_5$ addition. Dielectric permittivity, quality factor and temperature coefficient($T_{cf}$) of the two mole of $V_2O_5\;added\;Zn_3Nb_2O_8$ that was sintered at $900^{\circ}C$ were 21.4, 40,000, $-54ppm/^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.783-787
• /
• 2004

Microwave dielectric properties and the microstructure of $Ba_5Nb_4O_{15}$ ceramics with $PbO-B_2O_3-SiO_2$ glass frit were investigated to reduce the sintering temperature of $Ba_5Nb_4O_{15}$ ceramics as a function of the amount of glass frit from $0.5wt\%$ to $10wt\%$ and the sintering condition. The sintered density and the microwave dielectric properties of $Ba_5Nb_4O_{15}$ ceramics were remarkably changed with the amount of glass fit which existed as a liquid phase and assisted the densification. $Ba_5Nb_4O_{15}$ with $3wt\%$ $PbO-B_2O_3-SiO_2$ glass frit sintered at $900^{\circ}C$ for 2 h showed dielectric constant (K) of 41.4, a quality factor (Q $\times$f) of 13,485 GHz, and a Temperature Coefficient of resonant Frequency (TCF) of 9 ppm/$^{\circ}C$. Due to no trace of physical and chemical reaction between this composition and Ag electrode cofired at $900^{\circ}C$ for 2 h, this ceramics can be a good candidate for the multilayer dielectric filter.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1557-1562
• /
• 1999

As a series of studies on the preservation methods for boiled-dried anchovies, determination of sorption properties and shelf-life prediction were made for the samples. Dried anchovies, which were gamma-irradiated at pre-established dose (5 kGy) after packaging in both a polyethylene film (PE, 0.1 mm) and a laminated film $(nylon\;15\;{\mu}m/polyethylene\;100\;{\mu}m,\;NY/PE)$, were subjected to a quality evaluation during 4 months at different storage conditions, such as $15^{\circ}C/68%\;RH,\;25{\circ}C/75%\;RH,\;and\;35^{\circ}C/84%$ RH. The sample showed 5.47% of BET monomolecular layer moisture content and the corresponding water activity, 0.15. The velocity constants of browning reaction and organoleptic changes in the sample were in proportion to storage temperature, and $Q_{10}$, values were ranged from 2.17 to 2.40 in a given packaging and irradiation conditions. In the shelf-life prediction of the stored sample at $25^{\circ}C$, non-irradiated groups packaged in PE and NY/PE were 84 days and 125 days. While 5 kGy-irradiated groups in the same packaging were 126 days and 138 days, respectively. This finding proved the efficacy of laminated-film packaging and irradiation treatment in preserving the quality of dried anchovies.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.137-145
• /
• 2012

Strength model for blasted furnace slag mortar blended with sodium was investigated in this study. The main parameters of AAS (alkali activated slag) mortar were dosage of alkali activator, water to binder ratio (W/B), and aggregate to binder ratio (A/B). For evaluating the property related to the dosage of alkali activator, sodium carbonate ($Na_2CO_3$) of 4~8% was added to 4% dosage of sodium hydroxide (NaOH). W/B and A/B was varied 0.45~0.60 and 2.05~2.85, respectively. An alkali quality coefficient combining the amounts of main compositions of source materials and sodium oxide ($Na_2O$) in sodium hydroxide and sodium carbonate is proposed to assess the compressive strength of alkali activated mortars. Test results clearly showed that the compressive strength development of alkali-activated mortars were significantly dependent on the proposed alkali quality coefficient. Compressive strength development of AAS mortars were also estimated using the formula specified in the previous study, which was calibrated using the collected database. Predictions from the simplified equations showed good agreements with the test results.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.546-554
• /
• 1995

Vacuum cooling of crisphead lettuce by pilot-scale vacuum cooling apparatus, transportation under the conventional and cold-chain systems and distribution were carried out for its freshness prolongation and application of cold-chain system for fresh fruits and vegetables. Changes in temperatures of crisphead lettuce were also measured during transportation. $Q_{10}$ value for respiration rate of crisphead lettuce was $1.7{\sim}2.4$ and its initial freezing point was $-0.2^{\circ}C$. Cooling the vegetable to $0^{\circ}C$ was possible in less than 30 minutes by vacuum cooling. The shelf-life was extended by more than 90% by the combination of vacuum cooling and low temperature distribution.