• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.1-10
• /
• 1997

3-레벨 ZVS PWM DC/DC 컨버터는 풀브리지 ZVS PWM DC/DC 컨버터와 같은 동작 특성을 가지면서 입력전압의 반을 스위칭 소자의 차단전압으로 갖기 때문에 높은 입력을 갖는 DC-DC 변환시스템에 적합한 구조라 할 것이다. 그러나 부유 인덕턴스의 영향으로 인한 내외측 소자간의 차단전압 불균형의 문제와 경부하에서 영전압 스위칭 동작을 하지 못하므로 부하범위가 작다는 문제점을 가지고 있다. 이와 같은 문제점들은 시스템의 신뢰도를 낮추며, 경부하로 갈수록 효율을 떨어뜨리게 된다. 철도 차량과 같은 고압, 대용량의 시스템에서 이러한 문제들은 더욱 두드러 진다. 본 논문에서는 내외측 소자간의 차단전압 불균형의 문제를 없애며, 무부하에서 전부하까지 모든 부하 영역에서 영전압 스위칭 동작을 할 수 있는 새로운 3-레벨 ZVS PWM DC/DC 컨버터를 제시한다. 제안한 회로의 동작 특성과 타당성을 시뮬레이션 및 실험 결과를 통하여 입증한다.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.205-207
• /
• 2007

Isolated Current fed full-bridge converter with active clamp is analyzed in this paper. An active clamp branch is used for limiting the voltage overshoot in the bridge switches and rectifier diodes. Zero voltage switching(ZVS) is also realized by using the energy stored in the transformer leakage inductance. To analyze the converter, 6 modes of operation are introduced and investigated. For each of the modes, voltage and current equations are derived together with corresponding equivalent circuits. 200W prototype dc-dc converter is assembled and verifies the effectiveness of the analysis and simulation.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.691-695
• /
• 2004

본 논문에서는 2대의 다이오드 정류기에 풀브리지 컨버터를 이용하여 전류의 파형을 능동적으로 만들어 정현파의 입력전류를 얻는 새로운 통신용 정류기 시스템을 제안한다. 본 방식으로 낮은 직류전압(48V)을 직접 출력하며 전압의 조정도 가능하다. 또한 역률개선을 위한 부가적인 회로와 그에 따르는 제어가 필요하지 않고 연속 도통모드로 동작하여 비교적 높은 전력에 적용이 가능하다. 제안한 방식의 동작원리와 제어 및 설계방법을 기술하고 1.7KW 축소 모형으로부터의 실험결과를 제시한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.655-660
• /
• 2003

This paper proposes new single stage power factor correction (PFC) full bridge converter. The proposed converter is combined previous ZVS full bridge DC/DC converter with two inductors, two diodes, two magnetic coupling transformer for PFC. This process of power is isolated from the source and also regulate stable DC output voltage in a category. In this topology, the voltage stress of main switches is reduced by zero voltage switching. Moreover, the proposed converter doesn't need active PFC switch and auxiliarly circuits, like control and gating board, so it could decrease the size and cost and increase the efficiency.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.4
• /
• pp.261-268
• /
• 2020

Transformer saturation in full bridge (FB) isolated DC-DC converters is caused by uneven switching speeds and voltage drops in semiconductor devices and mismatched gate signals. In order to prevent transformer saturation, most popular and widely used approach is to insert a capacitor in series with the transformer windings. This study conducts extensive analyses on transformer saturation and the effect of DC blocking capacitors when they are placed in the primary or secondary windings of a transformer. The effect of the DC blocking capacitors is verified in voltage-fed and current-fed FB converters.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2685-2687
• /
• 1999

This paper is concerned on developing DC-DC converter. In contrast to resonant converter, this converter requires no external resonant elements and operates with constant switching frequency. In conventional PWM converter, two MOSFET switches of the converter are simultaneously turned on and turned off. In presented converter, to achieve Zero Voltage Switching, the two legs of the bridge are operated DC-DC converter is phase shifted. Phase shifted Full Bridge ZVS PWM Converter have an effect on the power system. Operation principle and features are illustrated by the experiment results from 50W, 250kHz with MOSFET switch.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.926-927
• /
• 2008

This paper presents the ZVZCS(Zero- Voltage and Zero-Current-Switching) Full-Bridge converter using the secondary coupled inductor and auxiliary capacitor. The converter with phase-shift control is proposed to reduce the circulating loss in primary and the voltage stress in secondary side. Using a coupled winding of the output inductor, two auxiliary capacitors are generated to reset the primary current at circulating interval.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.333-336
• /
• 2003

Designed transformer-less inverter for photovoltaic and small unit windturbine power system. This system consisted of boost chopper circuit of multiple-switching method and foil bridge PWM inverter. Transformer-less system was adapted to reduce cost and size. But in this system, earth-leakage current have to be considered. So, to solve this problem, we used PWM inverter switching method to reduce the earth-leakage current which flows in accordance with the variation of DC input common mode voltage.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.235-238
• /
• 2006

As the screen size of LCD TV increases, an external electrode fluorescent lamp (EEFL) has been suggested to be applicable as backlight source for LCD TV. Since the EEFL has non-linear characteristics, which makes the analysis and design complicated. In this paper, the characteristics of the EEFL are investigated and a full-bridge RLC series-resonant inverter is analyzed and designed for EEFL backlight of 32-inch LCD TV. Finally, the experimental results are shown to validate the analysis and design.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.616-620
• /
• 2003

액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동 인버터의 설계함에 있어 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 파라미터 선정 및 최적화를 하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-pull)과 하프-브리지(Half-bridge) 회로이며, 휘도 제어기법으로는 아날로그(Analog)와 버스트(Burst) 방법을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA(최소)로 휘도 0-100$\%$ 특성을 보였다. 입출력 효율로 18.6(최소)-90.3(최대)$\%$를 얻었으며, 버스트 제어방식에서는 듀티비 50-5$\%$에서 1-6mA의 제어 성능을 보였다. 인버터의 입출력 효율은 13.6(최소)-82.1(최대)$\%$를 얻었다.