• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.472-480
• /
• 2009

This paper describes the overmodulative SVPWM technique and harmonics analyses of three phase NPC type three-level inverter to the modulation index. Three phase NPC type three-level inverter adopted SVPWM to extend the linear region to 0.907, moreover, the following voltage compensation using Fourier series was adopted in the region of overmodulation to make it work to six-step level. PD type of multi carrier method is used with the double Fourier series for the analysis of output power harmonics characteristic. Simulation was performed by PSIM, and the harmonics characteristics of 3-level inverter in each region are analyzed. The side band harmonics of carrier frequency are dominant in the linear region, but these harmonic components are decreased as the inveter goes to overmodulation region, and the harmonics due to the fundamental frequency is increased gradually at the same time. The harmonic analyses are verified through the simulation and experimental results under the same condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.221-226
• /
• 1995

터빈 익렬, 펌프 익차, 원형 냉각탑, 치차 등과 같이 동일한 형상이 원주 방향으로 반복되어 있는 순환 대칭 구조물의 진동특성을 유한 요소법을 사용하여 해석하는 경우에 전체구조를 모델링하는 대신에 구조물을 동일한 형상의 부분구조로 분할하여 부분구조 한개만을 모델링하고 분할된 경계에서 적절한 경계조건을 부과하여 진동해석을 수행함으로서 컴퓨터 기억용량을 절감시키고 계산시간을 단축할 수 있는 방법이 널리 사용되고 있다. Orris and Petyt[1]는 부분구조의 양쪽 분할 경계면, 즉 연결 경계상에 있는 절점변위의 상관관계를 복소파동전파식을 이용해서 구하여 부분구조의 감소된 복소강성행렬 및 질량행렬을 만들고 실수부와 허수부를 분리하여 유한요소해석을 수행하는 방법을 제안하였다. 유한요소 프로그램 ANSYS[2]에서는 이와 같은 방법을 사용하고 있다. Thomas[3]는 순회 정규모드를 이용하였고, 참고문헌[4]에서는 순회행렬을 이용하였다. 또한 유한요소 프로그램 MSC/NASTRAN[5]에서는 푸리에 급수를 이용하고 유한요소 절점의 위치 및 변위를 원통 좌표계를 표현하여 순환대칭구조물의 유한요소해석을 수행할 수 있도록 되어있다. 본 논문에서는 순환 대칭구조물의 형상의 주기성과 순환성을 고려하여 이산퓨리에 변환을 이용함으로써 순환대칭구조물의 유한요소진동해석을 체계적으로 저용량의 컴퓨터에서 신속하고 정확하게 수행할 수 있는 방법을 제안하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1005-1010
• /
• 2004

An analysis method of slot-coupled microstripline to waveguide transition is presented to developed a simple but accurate equivalent circuit model. The equivalent circuit consists of an ideal transformer, microstrip open stub, and admittance elements looking into a waveguide and a half space of feed side from a slot center. The related circuit element values are calculated by applying the reciprocity theorem, the Fourier transform and series representation, the complex power concept, and the spectral-domain immittance approach. The computed scattering parameters are compared with the measured, and good agreement validates the simplicity and accuracy of the proposed equivalent circuit model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.179-187
• /
• 2000

When one considers the property of the axisymmetry, an analysis of an axisymmetric shell subjected to unaxisymmetric loading can be employed to save time and computer memory space. If one considers the Fourier series of the circumference direction of loads and displacements, an axisymmetric tank subjected to a nonaxisymmetric load can be treated as a frame element. Using the Fourier series, the authors derived the stiffness matrix of the cylindrical shell subjected to unaxisymmetric loading by the usual finite element method, and converted the stiffness matrix of a frame element into a transfer matrix by rearranging the stiffness matrix to apply the transfer matrix method. Here the most significant purpose of this paper is to achieve the fewest number of simultaneous equations for analysing an axisymmetric shell subjected to a nonaxisymmetric load. The results of the proposed method of the analysis of the cylindrical shell subjected to a wind load and a water load show no differences when compared to the other methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.42-47
• /
• 2007

An analytical method for the free vibration of a flexible rectangular plate in contact with water is developed by the Rayleigh.Ritz method. The plate clamped along the edges is partially contacted with water at both sides. It is assumed that the water bounded by rigid walls is incompressible and inviscid. The wet mode shape of the plate is assumed as a combination of the dry mode shapes of a clamped beam. The liquid motion is described by using the liquid displacement potential and determined by using the compatibility conditions along the liquid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict excellently the fluid.coupled natural frequencies comparing with the finite element analysis result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.908-913
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes appear. The proposed analytical method is verified by observing a good agreement to three dimensional finite element analysis results. All natural frequency of the in-phase modes can be predicted well by the combination of the dry beam modes. The theoretical prediction for the out-of-phase mode can be improved by using the polynomial functions satisfying the plate boundary conditions and fluid volume conservation instead of using dry beam modes.

• Journal for History of Mathematics
• /
• v.27 no.1
• /
• pp.81-93
• /
• 2014

The $L^1$-convergence of Fourier series problems through additional assumptions for Fourier coefficients were presented by W. H. Young in 1913. We say that they are the classical results. Using modified trigonometric series is the convenience method to study the $L^1$-convergence of Fourier series problems. they are called the neoclassical results. This study concerns with the $L^1$-convergence of Fourier series. We introduce the classical and neoclassical results of $L^1$-convergence sequentially. In particular, we investigate $L^1$-convergence results focused on the results of Bhatia's studies. In conclusion, we present the research minor lineage of Bhatia's studies and compare the classes of $L^1$-convergence mutually.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.216-220
• /
• 2008

In general the Banach space $L^1(T^1)$ doesn't admit convergence in norm. Thus the convergence in norm of the partial sums can not be characterized in terms of Fourier coefficients without additional assumptions about the sequence$\{^{\^}f(\xi)\}$. The problem of $L^1(T^1)$-convergence consists of finding the properties of Fourier coefficients such that the necessary and sufficient condition for (1.2) and (1.3). This paper showed that let $\{{\alpha}_{\kappa}\}{\in}BV$ and ${\xi}{\Delta}a_{\xi}=o(1),\;{\xi}{\rightarrow}{\infty}$. Then (1.1) is a Fourier series if and only if $\{{\alpha}_{\kappa}\}{\in}{\Gamma}$.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.55-59
• /
• 2004

유한요소법을 이용하여 전자장을 해석할 경우 전류원이 전 영역에 비해 극히 작은 영역이면, 요소분할 과정에서 소스부분을 세분하여야 하므로 결국 미지수의 증가를 가져오게 된다. 또한, 선전류 문제의 경우 2차원 유한 요소 해석이 용이하지 않다. 이를 보안하기 위해 본 논문에서는 소스가 선전류이고 관심 영역이 선전류원으로부터 떨어져 있는 경우, 소스 영역은 해석해를 적용하여 유한요소법과 결합하는 방법을 제시하였다. 해석적인 해는 원통좌표계에서 반정에 대한 멱함수와 회전각도에 대한 삼각함수의 곱의 형태로 표현된다. 이때 두 종류의 적분 상수가 있는데, 이는 경계상의 포텐셜값과 유한요소법의 경계 적분항을 푸리에급수로 전개한 계수로 표현된다. 제안한 알고리즘의 검증을 위하여 해석해가 존재하는 모델을 설정하여 해석적인 방법, 기존의 유한요소 법 및 결합 방법에 의한 해를 비교 검증하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.11
• /
• pp.897-906
• /
• 2002

Standard temperature and absolute humidity weather correlations of Seoul for dynamic energy simulation have been developed regressing the measured data compiled by the Korea Meteorological Adminstration during a 10-year period from 1991 to 2000. The mathematical equations can generate the daily and yearly variations of outdoor weather data with consistency unlike the measured data which may show abnormal behavior, Considering that each hour of the day follows a certain yearly pattern, the correlations are developed for each hour. The derived 24 simple mathematical equations can be used for estimating outdoor temperature and humidity conditions for any arbitrary time of the year.