• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.525-529
• /
• 2016

Biomass co-firing to existing thermal power plants is one of the most economical and efficient way to reduce $CO_2$ emission from the plant. There are several methods of co-firing and it can be categorized into (1) Parallel co-firing, (2) Indirect co-firing, and (3) Direct co-firing. Parallel co-firing is the most expensive way to high-ratio co-firing because it requires biomass dedicated boiler. Direct co-firing is widely used because it does not need high capital cost compared with the other two methods. Regarding the direct co-firing, it can be classified into three methods- Method 1 does not need retrofit of the facilities because it uses existing coal mills for pulverizing biomass fuels. In this case high-ratio co-firing cannot be achieved because of poor grindability of biomass fuels. Method 2 needs biomass-dedicated mills and revision of fuel streams for the combustion system, and Method 3 needs additional retrofit of the boiler as well as biomass mills. It can achieve highest share of the biomass co-firing compared with other two methods. In Korea, many coal power plants have been adopting Method 1 for coping with RPS(Renewable portfolio standards). Higher co-firing ratio (> 5% thermal share) has not been considered in Korean power plants due to policy of limitation in biomass co-firing for securing REC(Renewable Energy Certificate). On the other hand, higher-share co-firing of biomass is widely used in Europe and US using biomass dedicated mills, following their policy to enhance utilization of renewable energy in those countries. Technical problems which can be caused by increasing share of the biomass in coal power plants are summarized and discussed in this report. $CO_2$ abatement will become more and more critical issues for coal power plants since Paris agreement(2015) and demand of higher share of biomass in the coal power plants will be rapidly increased in Korea as well. Torrefaction of the biomass can be one of the best options because torrefied biomass has higher heating value and grindability than other biomass fuels. Perspective of the biomass torrefaction for co-firing is discussed, and economic feasibility of biomass torrefaction will be crucial for implementation of this technology.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.177-183
• /
• 2006

IMO and ITU-R have done an intensive study to develop performance standards and technical standards of maritime digital communication systems, respectively. In particular, each administration strives to develop new agenda items of adopting digital new technologies. IMO COMSAR submitted draft performance standard of LRIT to IMO MSC, so that IMO mandates carriage requirement of LRIT In addition to that, COMSAR is preparing performance standard of AIS-SART, and approved the utilization of mobile phones for SAR activities. On the other hand, a new agenda item concerning E-navigation strategy was submitted to MSC 81th meeting. These challenges toward enhanced maritime radio communication systems would make it change largely the concepts of traditional navigation We suggest future directions of maritime information communication systems, investigating the study results of IMO and ITU-R.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.768-777
• /
• 2017

The efforts to improve river levee maintenance technologies have accelerated globally in a bid to deal with the flood damage resulting from the changes to the climate and flood events. This paper, in line with such tendency, proposes an evaluation system of a river levee safety map to maintain the river levee in an efficient manner. The concept of a river levee safety map is aimed at maximizing the maintenance efficiency for a manager to indicate the safety index, including the current river levee sliding, piping, and visual inspection on a GIS map. To develop such an evaluation system, a safety index covering the sliding, piping, and visual inspection are designated through the data and document examination and the rational guideline to classify each index into three grades, A, B, and C, is proposed. Based on the guideline proposed, the sliding and piping characteristics in terms of safety depending on the change to the flood water level duration time at the test section (Nam river) were evaluated by numerical analysis. As a result, both the protected landside and riverside satisfied the requirements for Grade A in terms of sliding, and when it comes to piping, the grade declined to C because the flood water level duration time increased at R2. As a planning study to propose a river levee safety map evaluation system, a further advanced study, standardization of the river levee data, and improvement of the existing system and laws are required.

• Journal of The Korean Association For Science Education
• /
• v.38 no.5
• /
• pp.721-738
• /
• 2018

Nature of Science(NOS) has been a well-organized focus of science education and one of the key elements in defining and cultivating scientific literacy for more than a century. In recent years, a specific description of NOS, which is often known as 'the consensus view of NOS', has become very influential and has gained ready acceptance as an arrangement for both curriculum building and research into understanding of NOS by students and teachers in many countries around the world. This study has two purposes; one is to review some debates and criticism on the consensus view of NOS which consists of a list of sentences to describe nature of refined and general science, which have been heated up for the last few years by many prominent science education researchers, and the other is to consider alternative perspectives on NOS for the purpose of a new direction of NOS education. As a result of an investigation into such views as 'Teaching about NOS', 'Critical NOS', 'Critical Thinking-NOS', 'Whole Science', 'Features of Science' and 'Reconceptualized Family Resemblance Approach to NOS', some implications which focus on the generality and plurality of content knowledge of NOS based on current philosophy of science and sociology of scientific knowledge are suggested for the improvement of teaching and learning NOS.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.285-298
• /
• 2009

According to the development of ubiquitous technologies, sensor networks is used in various area. In particular, medical field is one of the significant application areas using sensor networks, and recently it has come to be more important according to standardization of the body sensor networks technology. There are special characteristics of their own for medical sensor networks, which are different from the one of sensor networks for general application or environment. In this paper, we propose a hierarchical medical sensor networks structure considering own properties of medical applications, and also introduce transmission mechanism based on hierarchical structure. Our mechanism uses the priority and threshold value for medical sensor nodes considering patient's needs and health condition. Through this way Cluster head can transmit emergency data to the Base station rapidly. We also present the new key establishment mechanism based on key management mechanism which is proposed by L. Eschenauer and V. Gligor for our proposed structure and transmission mechanism. We use key provisioning for emergency nodes that have high priority based on patients' health condition. This mechanism guarantees the emergency nodes to establish the key and transmit the urgent message to the new cluster head more rapidly through preparing key establishment with key provisioning. We analyze the efficiency of our mechanism through comparing the amount of traffic and energy consumption with analysis and simulation with QualNet simulator. We also implemented our key management mechanism on TmoteSKY sensor board using TinyOS 2.0 and through this experiments we proved that the new mechanism could be actually utilized in network design.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.79-91
• /
• 2020

Accurate assessment of greenhouse gas emissions is a cornerstone of every climate change response study, and reliable assessment of greenhouse gas emission data is being used as a practical basis for the entire climate change prediction and modeling studies. Essential, fundamental technologies for estimating greenhouse gas emissions include an on-site monitoring technology, an evaluation methodology of uncertainty in emission factors, and a verification technology for reductions. The closed chamber method is being commonly used to measure gas fluxes between soil-vegetation and atmosphere. This method has the advantages of being simple, easily available and economical. This study presented the technical bases of the closed chamber method for measuring methane fluxes from a rice paddy. The methane fluxes from rice paddies occupy the largest portion of a single source of greenhouse gas in the agricultural field. We reviewed the international and the domestic studies on automated chamber monitoring systems that have been developed from manually operated chambers. Based on this review, we discussed scientific concerns on chamber methods with a particular focus on quality control for improving measurement reliability of field data.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.261-272
• /
• 2020

Approvals for cultivation and import of genetically modified (GM) crops have dramatically increased around the world. Comparative compositional studies are an important aspect of safety assessments of products from GM crops and are based on substantial equivalence. Compositional analyses focus on determining similarities and differences between the compositions of the GM crops and their conventional counterparts, and thereby assessing the compositional equivalence of GM crops and their conventional comparators. The analytes, such as major constituents, key nutrients, and antinutrients, are generally determined on a crop-specific basis according to the OECD consensus document. The use of standard methods throughout the processes, such as selection of comparators, field trials, analytical methods, and statistical data analysis, is crucial. In this study, we showed the general framework of compositional studies. Literature for compositional studies of GM crops conducted abroad and in Korea was reviewed to obtain information about analytes, conventional counterparts, cultivation year, location, and statistical methods. The studies conducted abroad assessed for commercial release of GM crops such as soybean, maize, and cotton, while domestic studies were mainly performed for research in rice. In addition, we suggested a guidance for conventional comparators and field trials applicable to the domestic situation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.68-75
• /
• 2019

This study aims to look at the application methods of landscape architecture in response to the 4th Industrial Revolution. The results of the analysis of trends in the 4th Industrial Revolution and the subsequent search for application methods to the field of landscape architecture are as follows. First, the 4th Industrial Revolution means innovative change based on digital technology and seeks to create value based on intelligent information technology, and continuous growth is being made through innovation. This requires expertise to collect large amounts of information and creatively rework it, and a strategy to flexibly cope with changes in the times. Second, the status of technological use in response to the 4th Industrial Revolution in the field of landscape architecture is generalizing the establishment of precise analysis results such as survey technology and global mapping using drones, three-dimensional design simulation, and VR. In the field of traditional landscape architecture, efforts are made to obtain accurate fact-finding data on landscape site components. Third, the application methods in the field of landscape science according to the 4th Industrial Revolution in the future are required to supply precision technology and supply programs in the technology sector, and to provide a shared platform. In addition, a systemically standardized process will need to be established for this. In addition, educational efforts should be continued to professional manpower training and provide economic support for the development of technologies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.30-38
• /
• 2022

According to the United Nations Convention on the Law of the Sea (Article 94), the flag state must fulfill its overall role to ensure maritime safety and operate the ship inspection system as a related measure. The Korean government (Ministry of Ocean and Fisheries) has implemented policies for reducing marine accidents to promote maritime safety; however, the target goal has not been achieved. The ship inspection system is a measure to prevent marine accidents, and for the effective operation of the system, a sufficient understanding of the origin of the ship inspection system is required. In this study, the trend of the international ship inspection system was identified by analyzing ship inspection system origins and the history of the system's paradigm shift. The recent international ship inspection system paradigm confirms international standardization and the active safety management of ship companies are becoming increasingly prominent. Based on this, the introduction of the 'PDCA cycle-based self-inspection system' is presented to the current domestic ship inspection system. This is a new type of inspection system that establishes the roles of interested parties based on the basic philosophy of the ISO 9000 series to improve the ef ectiveness of maritime safety. Additionally, the necessity for a non-face-to-face ship inspection system has emerged because of the COVID-19 pandemic. Hence, the transition to a 'mobile application-based ship inspection system' is proposed to accommodate the rapid development of information communications technology.