• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.793-800
• /
• 2002

표준전동차는 1995 년 9 월부터 2001 년 12 월까지 수행된 도시철도차량 표준화 국산화사업의 일환으로 도시철도차량 표준화와 차량핵심장치의 국산화를 위해 개발되었으며, 한국의 표준이 되는 전동차이다. 도시철도차량의 표준사양, 성능시험기준, 품질인증기준, 안전기준, 정밀진단기준 등 제반 표준화기준에 의거하여 표준전동차가 설계, 제작되었으며, 수입에 의존하던 추진장치와 차량제어장치를 국산화하여 장착하였다. 제작된 핵심장치 및 표준전동차에 대해 구성품시험, 완성차시험, 본선시운전시험, 실용화를 위한 10 만 Km 내구도주행시험 등 각종 성능시험이 수행되었으며, 전동차 국산화율이 60%에서 95%로 향상되었다. 본 논문은 표준전동차의 개발경위, 핵심장치 국산화 내용, 각종 시험결과 등 전반적인 개발내용을 기술하고 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.123-126
• /
• 2010

도시철도 운영기관에서 사용되는 감시카메라 및 센서의 수는 운영기관마다 수천 개 이상에 이르고 있으며, 그 수는 지속적으로 증가하고 있다. 역사 시설뿐만 아니라 현재는 차량 내에도 카메라 및 센서를 설치하고 있거나 설치할 예정이다. 또한 도시철도의 안전에 대한 요구가 증대되면 될수록 이러한 안전설비는 증가할 수밖에 없다. 그러나 현재까지 이렇게 많은 곳에 설치된 카메라 및 센서들과 안전 설비를 효율적으로 관리할 수 있는 방안은 없다. 아직까지 폐쇄회로 텔레비전에 의존한 수동적인 감시체계에서 벗어나지 못하고 있으며, 각종 센서 등도 독립적으로 기능을 수행하고 있어 기능의 중복투자 및 비상시 종합적인 판단을 하기에는 한계를 가지고 있다. 또한 새로운 안전시스템과 기존 시스템과의 호환성 및 확장성 등에 문제를 발생시킬 수 있으며, 종합 관제실 등에서도 종합적인 판단을 실시하고 상황발생시 즉각적인 대응을 하는 데는 많은 문제점을 가지고 있다. 이를 위해 본 논문에서는 도시철도 운영기관별 정보통신시스템 현황 및 종합감시시스템 발주사양서를 비교 분석하여, 도시철도 종합감시시스템에 대한 표준규격을 도출하였다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.151-158
• /
• 2003

현재 각 도시철도 운영기관이 사용하고 있는 부품코드체계는 구 정부물품 분류체계 11자리를 수요한 코드체계로의 군, 급의 2단계 분류로 구성되어 있어, 분류단계의 제약이 존재할 뿐만 아니라 분류체계의 구조적 문제로 군, 급, 품명의 빈번한 통합, 삭제에 따른 코드 관리의 어려움이 존재하고 있다. 또한, 사용자가 원하는 물품을 해당 분류체계로 찾아가기 위한 그룹별 탐색과 통계적 분석이 불가능한 실정이다. 이러한 분류체계의 문제점과 향후 차종의 노후화로 발생될 관리품목의 증가로 업무능률 저하가 예상되기 때문에 새로운 체계의 표준화된 부품코드체계가 절실히 필요한 실정이다. 본 논문은 산업 발전에 따르는 확장성과 세분화에 대한 분류구조의 탄력성을 가지고 객관적으로 분류 추가 및 변경이 가능하도록 하고, 정부 및 국제기관 표준권고안과 호환성을 가질 수 있는 표준 부품코드체계를 제정하기 위한 연구결과이다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1426-1440
• /
• 2008

In Korea, the concentration for the use of urban railroads is comparatively high during peak hours. In case of road traffic, overcrowdness leads the increase of total travel time and cost naturally but this does not happen in railroad systems because of fixed operational interval. Thus, passenger's disutility is generated physically and mentally from congestion increment. The increase of railroad capacity from new transit lines and expansion of existed lines contributes traveler's comfort benefits to rising. However, present evaluation guidelines for feasibility studies of road and railroad projects do not include any valuation methodology about passenger's comfort benefits. Therefore, in this research, various factors affecting comfort benefits are reviewed and stated preference survey is performed in order to estimate traveler's comfort benefits for congestion reduction. In addition, willingness to pay for congestion avoidance is calculated from that stated preference survey based on Tobit Model. As a result, detailed unit for willingness to pay according to congestion reduction is proposed in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.579-590
• /
• 2012

Weight reduction of a railway axle, which is one of heaviest parts in an urban railway vehicle, is discussed in this paper. A wheelset of a railway vehicle is very important with regard to railway safety, and its structural strength should always be considered when attempting to reduce the railway axle weight. In this work, the weight of the axles of a trailer bogie and a motor bogie of the Korean EMU was reduced by replacing solid axles with hollow axles. On the basis of the EN standard for railway axle design, the strength of existing solid axles was analyzed and the required bore size of a hollow axle was determined. It is shown that the weight of the concurrent axle of the Korean EMU can be reduced by up to 20% with a very small decrease in the structural strength. Finite element analyses were also carried out to verify the design result for lightweight hollow axles.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.539-543
• /
• 2006

We need to make the standards of maintenance information for urban transit to reduce the cost to maintain the information and to share the information with maintenance workers. It is enable to do systematic maintenance for urban transit by using the information system based on the standardized information. In this paper we propose the major items to standardize and the methods to lay out the standard schemes to enable structured maintenance. We present the 4 items, bill of material, material classification, accident/fault classification, electronic document, to standardize. And we propose how to implement the information system for urban transit based on the standardized information. We describe the implemented information system in two parts; a rolling-stock and an infrastructure part. And also we describe the result of survey to evaluate the system installed at Seoul Metro and Seoul Metropolitan Rapid Transit.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.118-122
• /
• 2010

The study presents a standard time-temperature curve to evaluate the fire performance of subway tunnel structures. The central subway section is 135km long in Korea, the fourth longest in the world. The number of subway tunnels has been increasing rapidly and fire risk is proportional to the tunnel length. However, an adequate time-temperature curve for subway tunnel fires does not exist. Therefore, we studied a proposed foreign fire design model for which the heat rate is based on the traffic, and we present an appropriate time-temperature curve for Korean subway tunnels. The ISO 834 curve was used as a fire design model and the temperature distribution in the tunnel was estimated using numerical analysis. This led to a proposal for effective measures against subway tunnel fires.

• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.112-117
• /
• 2002

Reduction of noise level in the cabin of urban transit unit is an important issue to enhance the comfortability of passengers. It is made clear that a cause of increased noise level in cabin is the imperfect airtightness of entrance doors. In this study, the sliding-plug door system is developed to reduce the noise level of cabins by securing the airtightness of entrance door. The sliding-plug door system is composed of air-driven engine, swing arms, guide rails, guide rollers and locking devices. It is economical owing to using the previous door engine system. It is also adequate for the platform system of our subway station. It was tested to prove the reliability of system and was applied to standard urban transit unit. The effectiveness of noise reduction in cabin resulting form the sliding-plug door system was confirmed by test results.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.458-460
• /
• 1999

In this paper, the results of FEM electromagnetic analysis performed in the standardization development of traction motor for EMU are reviewed. The selection of optimal design parameter and performance analysis are proven through the complement of the circuit parameters on the basis of Performance test for developed traction motor.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.259-266
• /
• 1999

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a door control module, present a design method and a simulation method for that module.