• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.885-890
• /
• 2003

The Core Base Tree (CBT) multicast routing architecture is a multicast routing protocol for the internet. The CBT establishes a single shared tree for a multicast connection. The shared tree Is rooted at a center node called core. The location of the core may affect the cost and performance of the CBT. The core placement method requires the knowledge of the network topology In this Paper, we propose a simple and effective method for selecting the core. This method requires the distance vector information. in addition, we used results that calculated sample correlation coefficient. And then we select suitable routing algorithm according to member's arrangement states in muliticast group. we select core node that have minimum average cost or PIM-SM protocol is selected. The performance of this method is compared with several other methods by extensive simulations (i.e mean delay, maximum delay, and total cost). Our results shows that this method for Selecting Core is very effective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.291-300
• /
• 2006

In this study a statistical water quality monitoring network design of Kyung-An stream is proposed. Water quality data for the design is obtained by QUAL2E model simulation. The observed monthly average water quality data from March to November in Kyung-An stream has been applied to this study. HEC-RAS model is also used for QUAL2E hydrauric parameter estimation. Before QUAL2E water quality parameter estimation, FORA is performed to reduce the number of parameters to be estimated, and then water quality parameters are calibrated with a observed monthly average data. Using these simulated water quality data, the number of gage station and its location are estimated by kriging theory and branch & boundary method. Such a network design is based on two case; average flow and low flow case, respectively. Next, proportional sampling method is applied to estimate the sampling frequency.

• Journal of the Health Care and Life Science
• /
• v.11 no.2
• /
• pp.431-439
• /
• 2023

This study investigated the effect of oral health on health-related quality of life in cancer patients and cancer survivors using data from the 7th Korea National Health and Nutrition Examination survey. Data analysis was a complex sample analysis using SPSS/WIN 26.0. As a result of conducting complex sample logistic regression analysis to investigate factors affecting the quality of life of cancer patients and cancer survivors, the average quality of life was 1.18 points for cancer patients and 1.16 points for cancer survivors. The quality of life of cancer patients was significantly lowerer when they had discomfort chewing and speech difficulties, and needed dentures. Cancer suvivors was significantly lowerer when they had speech difficulties. Therefore, it is necessary to recognize the importance of oral care for cancer patients and cancer survivors, and to develop and utilize oral health care programs so that continuous and professional access to oral health care is necessary.

• Environmental and Resource Economics Review
• /
• v.7 no.2
• /
• pp.31-51
• /
• 1998

우편설문조사를 이용한 조건부가치측정법을 통해 자료를 수집할 경우 무응답자의 발생은 보편적이며, 그러한 무응답자의 존재는 무응답자편의(無應答者偏倚) 가능성을 내재하고 있으므로, 표본의 통계치를 이용한 모집단에 대한 확대 적용을 위해서는 우선적으로 무응답자편의(無應答者偏倚)에 대한 검정(檢定)이 이루어져야 하며. 또한 무응답자편의(無應答者偏倚) 발생시 이에 대한 적절한 조치가 취해져야 한다. 본 연구에서는 다단계 우편설문발송법을 통해 수집된 자료를 이용하여 효과적인 무응답자편의(無應答者偏倚) 검정(檢定)의 수행과 무응답자군(無應答者群)의 평균지불의사액을 별도로 추정한 후 이를 이용하여 보다 합리적이고 정확한 총지불의사액(Aggregate WTP)의 도출방법을 제시하였다. 이는 우선적으로 무응답자편의(無應答者偏倚)를 분산분석을 통해 검정(檢定)한 후 선형외삽법으로 무응답자군(無應答者群)의 평균지불의사액을 추정하여 이를 모집단의 총지불의사액을 산출하는데 이용하는 방법으로 기존의 보수적인 방법들보다 상대적으로 저렴한 비용으로 무응답자편의(無應答者偏倚) 검정(檢定)을 가능하게 하며, 사회적 또는 인구특성상의 차이를 이용한 통계적 가중치 이용방법과는 달리 연구자의 직접적인 관심의 대상이 되는 지불의사액을 이용하여 무응답자편의(無應答者偏倚) 테스트를 하고 또한 무응답자군(無應答者群)의 평균지불의사액을 추정하여 보다 효율적이며 타당성이 있는 총지불의사액을 산출해 낼 수 있다는 장점이 있다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.134-141
• /
• 2010

임분 단위의 재적 및 생체량은 LiDAR 자료의 높이 분포변수들로부터 추정될 수 있다. LiDAR 자료의 높이 분포변수들은 재적을 측정하는 임분고(stand height)와 임분평균 지하고(mean crown base height), 그리고 수관형태에 따른 평균수관장(mean crown depth) 등의 변수와 직 간접적인 연관성이 있다. 그러므로, 본 연구에서는 잣나무림의 샘플지역에서 반사된 LiDAR 자료의 높이분포변수를 이용하여 임분단위의 수간재적을 추정한 다음, 앞 세부연구에서 수행한 방법을 이용하여 임분의 생체량을 추정하였다. 변수는 임분 내에서 반사되는 LiDAR 자료의 평균높이, 최대 최소높이, 높이값들의 표준편차, 변이계수, 첨도, 왜도, 식생반사비율, 10분위 높이자료와 강도데이터의 기술통계량 등을 사용하였다. 그리고, 최종적인 임분수간재적은 다중회귀분석을 통하여 수행되었다. 다중회귀분석을 통하여 각 변수들은 임분수간재적과 가장 관련있는 2~3개의 변수들로 추려졌으며, 추정된 회귀식의 결정계수는 0.66으로 분석되었다. 또한 유보표본을 이용하여 검증한 결과의 결정계수는 0.59로 분석되어 LiDAR 자료의 높이분포변수들은 임분의 재적을 비교적 잘 설명할 수 있음이 밝혀졌다.

• Communications for Statistical Applications and Methods
• /
• v.16 no.2
• /
• pp.239-347
• /
• 2009

This paper presents Kolmogorov-Smirnov, mean difference, AUROC and AR, four well known statistics that have been widely used for evaluating the discriminatory power of credit rating models. Criteria for these statistics are determined by the value of mean difference under the assumption of normality and equal standard deviation. Alternative criteria are proposed through the simulations according to various sample sizes, type II error rates, and the ratio of bads, also we suggest the meaning of statistic on the basis of discriminatory power. Finally we make a comparative study of the currently used guidelines and simulated results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.399-400
• /
• 2017

홍수나 가뭄 등 극치 현상의 통계분석 및 빈도해석에 있어 극치분포형이 널리 사용되고 있으며, 이러한 극치분포형의 특성을 이해하기 위해서는 분포형의 오른쪽 꼬리(right tail) 부분 특성을 자세히 분석할 필요가 있다. 이에 따라 본 연구에서는 Monte Carlo 모의를 통하여 다양한 극치분포형의 오른쪽 꼬리 부분의 통계적 특성 및 그 예측 능력을 연구하였다. 극치분포형으로는 우리나라 확률수문량 산정에 널리 활용되고 있는 generalized extreme value (GEV), Gumbel, generalized logistic 분포를 사용하였으며, 매개변수 산정 방법으로는 확률가중모멘트법을 사용하였다. 모의실험의 모분포로는 수문빈도해석에서 많이 사용되는 GEV 분포를 사용하였고, 30년 이상 자료를 보유한 기상청 지점 자료의 왜곡도를 조사하여 모의실험에 사용되는 모집단의 왜곡도로 가정하여 표본 자료를 발생시켰다. 예측 능력의 평가는 재현기간 10~1000년의 확률수문량을 왜곡도계수를 고려한 GEV 도시위치공식을 이용하여 GEV 확률지에 도시하고, 평균제곱근오차(root mean square error), 편의(bias), 평균상대오차(mean relative difference), 평균절대상대오차(mean absolute relative difference)를 이용하여 최적 분포형을 선정함으로써 이루어진다. 또한 예측 능력 평가결과의 타당성 확인을 위해 극치분포형의 적합정도를 잘 나타낸다고 알려진 modified Anderson-Darling 방법의 검정결과와 비교하여 적절성을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.611-620
• /
• 1997

The history of Tidal Bench Mark(TBM) at four major tide observation stations on the the Korea West Coast is reviewed. The data concerned with the local mean sea level(LMSL), the datum level(DL), and TBM is collected and checked. The values of LMSL surveyed by Rural Development Corporation(RDC), Office of Hydrographic Affair(OHA), and Office of Port Affair(OPA) are compared so that their unbiased MSLs at four stations are determined. Kriging model is introduced to estimate the design levels for tide; DL, MSL, and high water spring tide(HWOST). The estimated design level is well fitted with the sample data. The value of the identified drifts increase with the latitude. The estimated semi-variograms ${\gamma}(h)$ show self similarity. The values of the ${\gamma}(h)$ for DL and HWOST are 0.005 times as much as the values of ${\gamma}(h)$ of MSL.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.109-116
• /
• 1991

In recent years, hydrologists have been interested in the radial spectrum and its estimation in two dimensional storm field to construct simulation model of the rainfall. This paper deals with the problem of transformation from the spectrum or isotropic covariance function to two dimensional random field. The extended turning band method for the generation of random field is applied to the problem using the line generation method of one dimensional stochastic process by G.Matheron. Examples of this generation is chosen in the random components of the multidimensional rainfall model suggested by Bras and are given with a comparison between theoretical and sample statistics. In this numerical experiments it is observed that first and second order statistics can be conserved. Also the example of moving storm simulation through Bras model is presented with the appropriate parameters and sample size.

• The Korean Journal of Applied Statistics
• /
• v.10 no.2
• /
• pp.215-226
• /
• 1997

The purpose of the labor statistics survey is to collect materials on employment, wages and the working time and to analyze the trend of the labor situation. in this research, the stratification variables are industry and the size of establishment. The sample are selected by stratified one stage sampling method in order to produce the reliable estimates of labor statistics. For local labor statistics, we design the sample survey using the city and province as sub-population. So we are able to produce the local area estimates of labor statistics with respect to industry and the size of establishment.