• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.359-365
• /
• 2017

Impermeable surfaces such as transportation land uses including roads and parking lots accumulate high heavy metals and particulate matters concentration especially during dry season which worsens the river water quality and distort the water circulation system during rainfall events. Recently, the government has been promoting policies to install Low Impact Development (LID) facilities such as permeable pavements or grass blocks in parking lots or pavements. However, transition of asphalt-paved surfaces to permeable pavement generated asphalt wastes which are detrimental to the environment and has cost implications due to its removal and disposal. Therefore this study was conducted to provide a method of constructing a cost-effective permeable pavement to reduce waste generation and cost. In this study, comparative analysis of the water circulation capacity and economic efficiency of the traditional construction method and new method proposed in this study through the lab-scale experiment. The proposed method was to make holes in existing asphalt pavements, layout geotextile fabric and permeable base media such as sand before compaction. After compaction, layout grass blocks on the compacted base media then layout sand in between each grass blocks before compaction. Apparently, there was no significant difference between the traditional installation method of permeable pavement and the proposed method in this study considering surface runoff, infiltrated volume, stored volume, and rainfall-runoff delay time. The proposed method in this study generated 86% less wastes compared to the traditional installation method and has 70% cost reduction considering asphalt removal and disposal. The construction method proposed in this study yielded similar performance compared to the traditional installation method and water circulation effect, but was proven to be less complicated and economical.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.1
• /
• pp.15-19
• /
• 2001

This study was carried out to investigate the effect of application time and amount of rice bran on rice yield, weed occurrence, and chemical change in water as applied at the level of 1.8 Mg/ha (1.8RB) and 3.5 Mg/ha (3.5RB) through field and pot experiment. $Nitrate(NO_3\;^-)$ in the surface water and the percolated water through pot were high in application of 3.5RB, and similar in application of 1.8RB as compared to chemical fertilization. Electric conductivity in surface water were higher by application of rice bran until 25 days after rice bran application. $NH_4-N$ in soil were lower in application of rice bran, and $NO_3-N$ in soil were higher in 3.5RB at tillering stage and panicle formation stage of rice. Rice bran application(3.5RB) showed 68% of weed occurrence as compared to that of chemical fertilization. Rice yield were increased by heavy application of rice bran; 4.41 Mg/ha in 1.8RB and 4.87 Mg/ha in 3.5RB, and top dressing of nitrogen at panicle formation stage caused to increased rice yield by $14{\sim}15%$. Rice yield was also increased by early application of rice bran.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.118-127
• /
• 2005

The comparison of water balance and nutrient loading from paddy field with different irrigation management were carried out during 1999 ${\sim}$ 2002 at two different sites; one is irrigated with groundwater and the other is irrigated with surface water. For the surface water irrigated paddy field, irrigation was performed continuously during growing season. Whereas, initial irrigation with groundwater was applied during initial growing season, and the ponded water depth was maintained by natural precipitation since initial irrigation. The runoff frequency of groundwater irrigated paddy field was less than that of surface water irrigated paddy field. The nutrient concentration of ponded water was high by fertilization at early cultural periods, so reducing surface drainage during fertilization period can reduce nutrient loading from paddy fields. Amount of irrigation water to surface water irrigated paddy field was higher than to groundwater irrigated paddy field and evapotranspiration was similar because it is influenced by climate. Overall input in and output from paddy field irrigated with goundwater were less than that with surface water. This study indicate that efficient water management can reduce surface drainage outflow, save water, and protect water quality. It might be important BMPs for paddy field.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1994.05a
• /
• pp.51-53
• /
• 1994

담수는 인간의 생존에 필수적인 요소이다. 우리는 매일 일정량의 물을 섭취하고 있으며, 일상에서 직접, 간접적으로 물과 관련되지 않고서는 생활할 수 없다. 지구 표면의 약 70%가 물로서 덮여 있다고는 하지만 인간의 생활에 직접적인 이용가치가 있는 담수(지표수)는 전체 물의 용적의 2%에 지나지 않는다. 한국의 연평균 강수량은 1,274mm로서 세계 연평균 강수량인 970mm보다 많은 편이나 인구 1인당 연간 강수량은 약 3,000m3으로서 세계 평균인 34,000m3의 11분의 1에 지나지 않는다. 수자원총량중 지하침투와 증발에 의해 손실되는 양을 제외한 하천유출량은 전체의 55%인 697억m3으로서 이것이 곧 가용수자원량이다. 그러나 하절기 강우집중도가 높은 우리나라 실정에서는 가용수자뭔량중 수자원총량의 37%가 홍수시 유출되고 실제 이용량은 수자원총량의 18%인 230억m3에 불과하여 인구증가와 함께 수자원의 가치가 더욱 증대하고 있는 실정이다. 더우기 지하수 이용량은 19억m3에 불과함에 따라 우리나라는 실제 이응수자 원량의 90% 이상을 지표수에 의존하고 있으며, 그 중 약 40%가 호소수로 구성되어 있다. 이러한 수자원 이용효율의 취약성으로 인해 제한된 수자원 용량과 생활 및 농공용수의 과수요에 따른 불균형으로 근래 많은 하천이 갈수기나 평수기시 친천화되어 가고 있어 수중생태계에 큰 위협을 주고 있다. 또한 이에 더하여 산업발달과 함께 수질오염원은 양적으로는 물론 질적으로도 증가일로에 있어 기존의 유기 및 중금속 오염물질을 포함해 수많은 신생 유기화합물질이 수계에 유출되고 있으며, 이에 더해 질소 및 인으로 대표되는 영양물질의 유입과다로 국내 대다수의 호수가 부영양화의 새로운 위협에 직 면해 있다. 우리나라에는 적은 유입유량에 큰 저수용량 및 긴 체류시간으로 대표되는 대규모 자연호는 없으며, 대부분이 매단위 강을 막아 형성된 체류시간 1년 이하의 인공호로서 그 중 안동호, 충주호, 대청호 등은 비교적 체류시간이 긴 호소형 인공호로, 팔당호나 기타 대부분의 호수는 체류시간이 짧은 하천형 인공호로 대별된다(Table 1). 이처럼 국내 호소는 국외의 자연 호와는 다른 구조적 특성을 가짐에 따라 부영양화 특성 역시 매우 상이하고, 호소형 인공호와 하천형 인공호간의 차이 역시 현저하여 일률적인 관리대책을 설정하기가 어려운 실정에 있다. 또한 각 호수의 유역특성이 상이함에 따라 호수별로 유역 오염원의 오염부하율이 현저히 달라(Table 2) 호수에 따른 특성적인 유역관리(Lake-specific management)가 요구되고 있다 정상상태(Steady state)가 아닌 국내 호소에 대해 국외 자연호의 인단순모델 (Simple phosphorus budget model)을 그대로 적용하는 것에 다소 무리한 점이 따르나, 평균적인 개념으로 OECD의 유역부하량 및 호소특성에 따른 부영양화 판정모델을 적용한다면, 국내 주요 호수는 모두 부영양 수준에 있다. 또 각 호수별로 부영양화 제어를 위해 요구되는 인의 삭감부하량은 상당량이 되어 현실적으로 관리가 이미 어려운 실정에 와 있다. 호수의 부영양화는 조류 발생으로 이어지며, 그에 따른 폐해는 각종 형태로 나타나는데 대표적으로 이취미 발생이나 유해조류에 의한 독성물질의 배출, 정수처리 과정의 THM 발생등이 주로 문제가 되고 있다. 따라서 국내 호수의 구조적 특성별 부영양화 실태를 파악하고 그에 따른 영향 및 관리방안에 관한 종합적 고찰이 차후 수질관리를 위해 요구되고 있으며, 특히 납조류로 대표되는 유해조류의 독성영향에 관한 연구는 시급한 실정에 있다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.93-101
• /
• 2005

The formation of slopes is unavoidable under the special circumstance of Korea where $7%$ of the whole area are composed of mountains and civil engineering projects such as road and site developments are increasing with industrial development and horizontal expansions of urban area. Stability of slopes is one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall is concentrated in summer season and the localized torrential downpour is getting more frequent recently. As a result of these circumstances, partial slope failures by debris flow of the high water content soils occur frequently in cut soil slopes. In this case of debris flow slope failure, slope declination method is selected fur the stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. For debris flow failure slopes, this study secured the safety of slopes by preventing the inflow of rainwater and scour using geosynthetics-reinforced embankment, and created nature-friendly slopes by planting trees on the slopes.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.257-263
• /
• 2018

Hyperthermia supplies RF high-frequency energy above 1MHz to the tumor tissue through the electrodes. And the temperature of the tumor tissue is increased to $42^{\circ}C$ or more to cause thermal necrosis. A mathematical model can be derived a human body model for absorption and transmission of electromagnetic energy in the human model and It is possible to evaluate the distribution of temperature fields in biological tissues. In this paper, we build the human model based on the adult standard model of the geometric shape of the 3D model and use the FVM code. It is assumed that Joule heat is supplied to the anatomical model to simulate the magnetic field induced by the external electrode and the temperature distribution was analyzed for 0-1,200 seconds. As a result of the simulation, it was confirmed that the transferred energy progressively penetrates from the edge of the electrode to the pulmonary tumors and from the skin surface to the subcutaneous layer.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.534-545
• /
• 2010

To examine 1) rainfall pattern (i.e., type and intensity) regulating surface erosion on hillslopes in postwildfire area and 2) its effect on variation in sediment yield along the gradient of severity wildfire regimes and elapsed years, we surveyed the amount of sediment yield with respect to daily or net-effective rainfall in 9 plots in eastern coastal region, Republic of Korea. Before field investigation, all plots classified into three groups: low-, mixed- and high-severity wildfire regimes (3 plots in each group). We found that, with decreasing wildfire regimes and increasing elapsed years, the rainfall type regulating surface erosion changed from daily rainfall to net-effective rainfall (considering rainfall continuity) and its intensity increased continuously. In general, wildfires can destroy the stabilized forest floors, and thus rainfall interception by vegetation and litter layer should be reduced. Wildfires can also decrease soil pores in forest floors, and thus infiltration rates of soil are reduced. These two processes lead to frequent occurrence of overland flows required to surface erosion, and sediment yields in post-wildfire areas should increase linearly with increasing rainfall events. With the decreasing severity wildfire regimes and the increasing elapsed years, these processes should be stabilized, and therefore their sediment yields also decreased. Our findings on variations in sediment yields caused by the wildfire regimes and the elapsed years suggest understanding of hydrogeomorphic and ecologic diversities in post-wildfire areas, and these should be carefully examined for both watershed management and disaster prevention.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.299-308
• /
• 2016

Seoul metropolitan has established a vision as 'Healthy water-cycle city' to resolve urban water-environmental deterioration. And it established administrative structure to expand Low Impact Development (LID) facilities to recover aggravated water-cycle and water-environment. Therefore, various LID facilities are constructed and operated, however, benefit analytic plans for systematic valuation are insufficient. In this study, to analyze economic, environmental and social benefits of LID facilities, contents for benefit analysis were selected and categorized as water, energy, air quality and climate changes. As a result of quantification and valuation to the beneficial effects, LID facilities showed the total benefit as 1,191~3,292 won/yr. Characteristics of benefit distribution by analysis contents were various reflecting functional characteristics of each LID facility (Water: 30~90%, Energy: 4~44%, Air quality: <1~2%, Climate change: 5~22%). As a result of Triple Bottom Line analysis, economic benefit showed the greatest portion as 75~90%. As further studies, suggested benefit assessment plans for each LID facility should be applied to inter-connected LID systems on complex-scaled area, and synergy effects by various LID systems would be evaluated such as prevention of heat island and flood disasters.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.365-376
• /
• 2007

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength (${\mu}TBS$) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups by etching times (5, 15, 25 sec), adhesives types (Scotchbond Multipurpose (SM), Single Bond (SB), One-Step (OS)) and number of thermocycling (0, 2,000 cycles). Flat dentin surfaces were prepared on mid-coronal dentin of extracted third molars. After exposed fresh dentin surfaces were polished with 600-grit SiC papers, each specimen was acid-etched with 35% phosphoric acid (5, 15, 25 sec) and bonded with 3 different types of total etching adhesives respectively. Then, hybrid composite Z-250 was built up. Half of them were not thermocycled (control group) and the ethers were subjected to 2,000 thermocycle (experimental group). They were sectioned occluso-gingivally into $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams and tested with universal testing machine at a crosshead speed of 1.0 mm/min. Within limited data of this study, the results were as follows 1. There was no statistically significant difference in ${\mu}TBS$ between the thermocycled and non-thermocycled groups, except for both SM and SB etched for 25 sec. 2. In thermocycled SM and SB groups, bond strength decreased by extended etching time. In total etching systems, adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may cause deteriorate effects on bond strength when ethanol-based adhesive was used.