• Journal of agriculture & life science
• /
• v.53 no.6
• /
• pp.13-21
• /
• 2019

The influences of light generated by LEDs on shoot growth and photosynthesis of Tea plant(Camellia sinensis L.) were evaluated. The growth characteristics were investigated after 45 days of culture under four different light qualities: fluorescent lamp, red LED, blue LED, red+blue+white LED. Shoot growth was promoted by red light, especially root length and area were further promoted under the red+blue+white LED. Also, T/R ratio and Chlorophyll content were highest in red+blue+white. Fluor Cam was used to measure the fluorescence images of the plants, inhibition of photochemical efficiency(Fv/Fm) were not changed in all treatment. However, non-photochemical quenching(NPQ) were found rapidly increasing in blue LED, these results were that blue LED were inhibit photosynthetic efficiency and must be considered for efficiently in vitro cultivation of the tea plant. The above results suggest that light qualities could be an important factor to foster in vitro growth of the species. Also, In order to produce healthy plants, it is effective to using light qualities of red+blue+white LED on in vitro culture of the tea plant. These results could be used to mass propagating shoot and produce of healthy seedling.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2019

The accident at the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) resulted in the deposition of large quantities of radionuclides over parts of eastern Japan. Radioactive contaminants have been observed over a large area including forests, cities, rivers and lakes. Due to the strong adsorption of radioactive cesium by soil particles, radioactive cesium migrates with the eroded soil, follows the surface flow paths, and is delivered downstream of population-rich regions and eventually to coastal areas. In this study, we developed a model to simulate the transport of contaminated sediment in a watershed hydrological system and this model was compared with observation data from eroded soil observation instruments located at the Korea Atomic Energy Research Institute. Two methods were applied to analyze the soil particle size distribution of the collected soil samples, including standardized sieve analysis and image analysis methods. Numerical models were developed to simulate the movement of soil along with actual rainfall considering initial saturation, rainfall infiltration, multilayer and rain splash. In the 2019 study, a numerical model will be used to add rainfall shield effect by trees, evaporation effect and shield effects of surface water. An eroded soil observation instrument has been installed near the Wolsong nuclear power plant since 2018 and observation data are being continuously collected. Based on these observations data, we will develop the numerical model to analyze long-term behavior of radionuclides on land as they move from land to rivers, lakes and coastal areas.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.183-183
• /
• 2015

Indium tin oxide (ITO)는 넓은 밴드갭을 가지는 n-type의 축퇴 반도체로 태양전지, 스마트윈도우, 터치 센서, organic light emitting displays (OLEDs) 등에 널리 적용된다. 최근 touch screen panels (TSPs)의 높은 전기적 특성 및 고해상도 요구에 따라 고품질 ITO 박막개발의 수요도 증가하는 추세이다. 지금까지 ITO 박막의 물성 및 기계적 특성에 관한 많은 연구가 진행되어 왔지만 ITO 초박막 에서의 근본적인 물성 변화에 대한 연구는 미흡한 실정이므로, 이러한 연구는 필수적이라 할 수 있다. ITO 초박막은 광학적 특성은 우수하나, 낮은 결정성으로 인해 전기적 특성이 나쁘다는 단점을 가지며, 이러한 ITO 박막의 결정성은 초기 박막 성장과정에 많은 영향을 받는다. ITO 박막의 초기성장과정은 핵이 생성된 후(nucleation), 각각의 위치에서 성장하게 되고(growth), 합쳐지면서(coalescence) 연속적인 막을 형성 하는데(continuous), 이러한 초기 박막 성장 과정 중에 핵 생성 밀도를 증가시키고 박막이 연속적으로 되는 두께를 감소시킨다면, 더욱 더 고품질의 ITO 초박막을 얻을 수 있을 것이다. 따라서, 본 연구에서는 박막 초기 형성 과정 중 섬들이 합체되는 두께를 최소화시키기 위하여 EMF(electromagnetic field strength) 시스템을 이용하였다. EMF 시스템은 DC 캐소드에 전자석 코일을 장착하여 전자기장을 추가로 부가한 것으로, 이를 이용할 경우 스퍼터 원자가 중성상태로 기판에 도달하는 것이 아니라, 이온화되어 Vp-Vf의 차이로 가속되어 추가적인 에너지를 공급받음으로써 기판표면상에서 확산을 촉진시키므로 박막이 연속적으로 되는 임계 두께를 감소시킬 수 있는 것으로 기대된다. 실험은 실온에서 DC 마그네트론 스퍼터링법을 이용하였으며, 유리기판위에 4, 6, 8, 10, 12, 20 nm의 두께로 ITO 박막을 제작하였다. 스퍼터링 파워는 150 W (3.29 W/cm3), 작업 압력은 0.13 Pa, 기판과 타깃 사이의 거리는 70 mm였다. 각각의 두께에서 EMF 파워 0, 5, 10, 15, 20, 25, 30 W로 인가하여 박막을 제작한 후, EMF 파워에 따른 ITO 박막의 초기 성장 과정중 표면상태를 AFM (atomic force microscope) 이미지를 통하여 관찰하였다. 또한, 두께 약 8 nm에서와 20 nm일 때의 전기적 특성 및 광학적 특성을 관찰하였으며, 두 박막 모두 EMF 파워 15 W를 인가하였을 때 그 특성이 가장 향상되는 것을 확인하였다. 이러한 결과를 통하여 박막은 초기 성장이 중요하므로, 매우 얇은 두께에서 좋은 특성을 가진 박막을 제작하여야 박막의 두께를 증가시켰을 때도 좋은 특성의 막을 얻을 수 있음을 알 수 있었다. 또한, EMF 파워를 증가시킴에 따라 자장강도를 증가시키는 것과 같은 효과 즉, 플라즈마 임피던스가 감소하는 효과를 내어 증착 중 고 에너지 입자 (Ar0, O-)에 의한 박막손상이 감소한 것으로 판단된다. 따라서 적정 EMF 파워 15 W를 인가하였을때 가장 물성이 좋은 ITO 박막을 얻을 수 있었다. 즉, EMF 시스템을 이용하여 저온 공정에서 결함농도가 적은 고품질의 ITO 초박막을 제작할 수 있었다.

• Trans-
• /
• v.3
• /
• pp.29-53
• /
• 2017

The film scholar Vincent Amiel divides into three types of montage through his book The Aesthetics of Montage ; Montage narratif, Montage discursif, and Montage decorrespondances. These three categories are the concept that encompasses the aesthetic class to which most movies belong. Early films pursued the essential and basic functions of editing, which tend to be modified in the direction of enhancing the director's goals over time. In this way, "Expressive Montage" is one of most important concepts of montage, not as a 'methodology' that combines narrative but as a 'purpose'. In the montage stage, the expressive montage work is done through three steps of decision. The process of 'combining' to combine the selected films in a certain order, after the process of 'selection' which selects only necessary parts of the rush film, and 'connection' to determine the scene connection considering the duration of the shot. The connection is the final stage of the montage. There are exceptions, of course. When fiction films of classical narratives use close-ups, or when using models or objects of neutered animals, the film induces the tendency of a "montage decorrespondances" rather than a "montage narratif" or "montage discursif". This study attempts to analyze the tendency of montage of works with 'uncertain connection' through 'collage' used by close-ups and montage decorrespondances as 'fragmentation tendency of modern films'. The fragmentation of the montage in contemporary film breaks the continuous and structural nature of the film, and confuses the narration structure that is visible on the surface of the film. The tendency of the fragmentation of the montage, which started from this close-up, seems to give an answer to the extensibility of the modern image.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.106-115
• /
• 2011

In this paper, we evaluate the effectiveness of previous shading algorithms in depicting shape of 3d objects. We perform a study in which people are shown an image of one of ten 3D objects shaded with one of eight styles and asked to orient a gauge to coincide with the surface normal at many positions on the object's surface. The normal estimates are compared with each other and with ground truth data provided by a registered 3D surface model to analyze accuracy and precision. Our experiments suggest that people interpret certain shape differently depending on shading of 3d object. This paper offers substantial evidence that current computer graphics shading algorithms can effectively depict shape of 3d objects where the algorithms have the properties of lots of tone steps and uniformly distributed tone steps. This type of analysis can guide the future development of new CG shading algorithms in computer graphics for the purpose of shape perception.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.646-660
• /
• 1994

The purpose of this study was to investigate the difference of the visual evaluation about Clothing form and the surface image of detail. This study consists of pre-experiment for selecting the method of expression among detail which shows difference of the image and main experiment for identifying the clothing image as clothing form and the suface image of detial. Main experiment is made of factorial design for three variables-clothing form (H-line, A-line, V-line, X-line), detail (frill, tape), direction (width, length). Questionaire consists of 24 semantic differential scale expressing clothing form and detail. The subjects were 100 female students majoring in clothing and textile.7he data were analyzed by Frequencey, Factor analysis, Anova, scheffe's test and MCA method. The major findings were; 1) The image of clothing form and the surface image of detail were composed of 5 factors; attractiveness, prettiness, attention, modern, young. 2) For the visual evaluation of clothing form as the surface image of detail, there were significant differences in prettiness and attention factors. For the pretty and attentive image, we should express by the image of frill. 3) For the visual evaluation of the image of detail as clothing forms variation, there were significant difference in prettiness by A-line and X-line. 4) For the effect of clothing form and the surface image of detail, main effect was significant in attractiveness, prettiness, attention, modern factor. For the pretty image of clothing, it will be expressed by the image of frill and A-line, X-line. For the attentive image of clothing, it will be expressed by the image of frill and V-line. For the modern image of clothing, it will be expressed by the image of tape and V-line.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.123-133
• /
• 2001

The existing visualization methods using the satellite images or map images require complicated preprocessing stages and a large amount of visual data to represent the 3-D terrain. This paper presents a 3-D visualization method for geographical information, which enables automatic generation of 3-D terrain. It is generated based, on contour information obtained from a numerical map. This paper also introduces a method that resolves the three main problems needed to visualize 3-D terrain from contour lines such as correspondence, tiling, and branching. The virtual contour line is defined to extend a distorted contour line to have a similar shape to the corresponding contour line that is used, to generate 3-D surfaces. It helps that 3-D terrain is represented exactly and in detail.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.1-12
• /
• 2013

Road's accidents caused by Ice, snow, Wet of roads surface conditions and weather conditions situations that are constantly occurring. That is, driver's negligence and safe driving ability of individuals due to lack of awareness, and Road management main agent(the government and the public, etc.) due to road conditions, if there is insufficient information. So Related research needs is a trend that is required. In this study, gather Camera(Stereo camera)'s image data, and analysis polarization coefficients and wavelet transform. And unlike traditional single-dimensional classification algorithms as multi-dimensional analysis by using SVM classification techniques, develop an algorithm to determine road conditions. Four on the road conditions (dry, wet, snow, ice) recognition success rate for the detection and analysis of experiments.

• Fire Science and Engineering
• /
• v.19 no.1 s.57
• /
• pp.93-98
• /
• 2005

The purpose of this paper is to judge the damage cause of instrument transformer(MOF; Metering Out Fit) installed in 22.9kV power receiving system. In the three-dimensional analysis of the restored MOF, the damage pattern progressed from inside to outside, there was no damaged part in the upside. The resistance of the carbonized middle part is roughly $100\kappa\Omega$ and the exothermic temperature at inside is presumed as about $300\~800^{\circ}C$ in the result of metallurgical structure analysis. The structure and the composition rate on metal surface by SEM is similar. In the result of FT-IR analysis, we can observe the absorbtion peak at $1500cm^{-1}\;and\;1730 cm^{-1}$ is small. The high exothermic peak showed at the center part of the coil in the result of DTA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.520-520
• /
• 2013

Lateral 구조를 갖는 탄소나노튜브 에미터 캐소드의 금속전극 선폭과 간격은 탄소나노튜브 에미터 밀도와 게이트에 인가되는 전계의 크기에 밀접한 관계가 있어 전계방출특성에 큰 영향을 나타내므로 조속한 상업화를 위해서는 최적화 연구가 요구된다. 따라서 본 연구에서는 금속전극의 선폭과 간격을 110/30, 80/30, 40/30과 120/20, 90/20, 20/20 ${\mu}m$로 각각 변화시켜 4.6인치 탄소나노튜브 에미터 기반 flat light lamp 개발연구를 진행하였다. 이때 사용한 금속전극은 2 mm 두께를 갖는 4.6인치 소다라임 글라스 위에 패턴 된 PR에 Ag를 sputtering하여 증착 후 PR을 lift-off하여 형성하였다. 이와 같이 형성된 금속전극은 ~1 ${\mu}m$와 12 nm의 두께와 표면단차를 각각 가지고 있었다. 형성된 금속전극 위에 유전체와 탄소나노튜브 에미터를 각각의 페이스트를 사용하여 스크린 인쇄와 소성과정을 통해 형성하였다. 이때 레이저 빔을 전극사이의 빈 공간에 조사하여 탄소나노튜브 에미터를 금속전극 위에 정밀하게 정렬하였으며 잔존하는 유기물과 유기용매를 없애기 위해 대기압 공기분위기의 $410^{\circ}C$에서 10분간 소성과정을 거친 후 접착테이프를 사용하여 잔탄 속에 있는 탄소나노튜브 에미터를 물리적 힘으로 수직하게 노출시켜 캐소드를 준비하였다. 애노드는 전계에 의해 방출된 전자의 측정과 전계방출 이미지를 얻기 위해서 P22 형광체와 Al박막이 증착된 2 mm 두께의 소다라임 글라스를 사용하였다. 캐소드와 애노드 사이의 간격은 6~10 mm로 유지하였고, 진공챔버의 기본 압력을 $5{\times}10^{-6}$ Torr 이하로 유지하였다. 캐소드와 게이트 전극에 1, 4 kHz와 3% duty를 갖는 bipolar 형태의 DC 사각펄스파를, 애노드에 ~18 kV의 DC 고전압을 각각 인가하여 평가하였으며 추후, 이렇게 제작된 다양한 선폭과 간격을 갖는 탄소나노튜브 에미터 기반 flat light lamp의 전계방출특성과 효율에 대한 비교 연구를 진행할 계획이다.