• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.252-253
• /
• 2000

본 실험에서는 수 MW/$ extrm{cm}^2$ 의 매우 낮은 영역의 세기에서 순수한 GaAs의 bulk에 대하여 실험한 결과 비선형 흡수가 나타남을 관찰 하였으며, 더불어 자유전하 흡수 계수를 여러 가지 세기의 빛에서 측정한 결과 자유전하 흡수 단면적이 빛의 세기에 따라 변화하는 것을 관찰하였다.$^{(1)}$ GaAs의 굴절률이 3.6으로 매우 커서 Fabry-Perot 효과가 나타나므로 시료의 한쪽 면을 SiN로 무반사 코팅을 하여 실험 하였다. GaAs의 표면은 쉽게 레이저 빛에 의해 손상을 입는 것을 고려하여 같은 자리에서 여러 번의 실험을 하여 같은 결과가 나오는 것을 확인하여 실험 결과를 얻었다. 사용된 레이저는 Nd:YAG 레이저로서 1.064 $mu extrm{m}$의 파장에서 7 나노초의 펄스를 방출한다. 빛의 세기는 편광기와 half wave plate를 이용하여 변화 시켰다. (중략)

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.195-201
• /
• 2022

The main objective of this work is to prepare Rehmannia glutinosa extract (RE) incorporated functional chitosan (CH) based biomaterials and evaluate their physical properties, RE release properties, inhibitory effect of melanogenesis, and antioxidant and elastase inhibitory activities. RE incorporated CH based biomaterials were synthesized by a casting method and UV curing process. The surface and cross sections of prepared biomaterials were characterized by a field emission scanning electron microscope (FE-SEM). The physical properties such as tensile strength and elongation at break were also investigated. To apply the transdermal drug delivery system, RE release properties were examined with pH 4.5, 5.5, and 6.5 buffer solutions and artificial skin test at 36.5 ℃. Results indicated that RE release of RE incorporated biomaterials with/without the addition of plasticizers [glycerol (GL) and citric acid (CA)] at pH 6.5 was about 1.10 times higher than that of at pH 4.5. In addition, results of the artificial skin test verified that RE was released constantly for 6 h. To verify the applicability of the prepared biomaterials, tyrosinase, 2,2-diphenyl-1-picrylhydrazyl (DPPH), and elastase assays were investigated. Results indicated that RE incorporated biomaterials added CA exhibited tyrosinase activation, DPPH radical scavenging activity rate, and elastase activation of 45.12, 89.40, and 59.94%, respectively.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.204-211
• /
• 1995

A target-sensitive liposome was prepared by using a dioleoyl-phosphatidylethanolamine(DOPE) and a palmitic acid coupled antibody(p-IgG). For the preparation of stable PE-liposomes, the key factors such as antibody modification method with palmitic acrid, molar ratio of p-IgG to lipid and the amount of various additives, were examined. The optimum molar ratio of p-IgG to lipid was found to be $2.5{\times}10^{-4}$ and the final concentration of deoxycholate for the stable liposome formation was about 0.09%. Two kinds of target-sensitive liposomes, containing polyclonal anti-SRBC(Sheep Red Blood Cell)-antibody and monoclonal anti-${\beta}$-HCG(Human Chorionic Gonadotropin)-antibody, were successfully prepared. The destabilization of liposomes was examined by measuring the release of calcein entrapped in the liposome vesicles. Calcein was released only when the liposomes were contacted with the specific target cells. The calcein release with non-specific target cells was negligible. From this result, it is clear that p-IgG is indispensible for the maintenance of stable PE-liposome and the calcein release is mainly due to the specific interactions between the liposomes containing antibody and the target cells containing antigen.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.7-12
• /
• 2019

To investigate the influence of the char layer formed during the combustion process on the pyrolysis of wood combustibles, ISO 5660-1 cone calorimetry experiments and Fire dynamics simulator (FDS) simulations were performed, and the results from these two methods were compared. The wood combustible selected as the fuel for this study, Douglas fir, has been widely used for the production of building materials, furniture, etc. The heat release rate (HRR) measured from the cone calorimetry experiment was in good agreement with the result predicted by the FDS simulation. However, the FDS simulation failed to predict the heat released by the smoldering combustion process, due to the absence of the char surface reaction in the model. The FDS simulation results clearly indicate that the char layer formed on the surface of combustibles produces a thermal barrier which prevents heat transfer to the interior, thickening the thermal depth and thus reducing the pyrolysis rate of combustibles.

• Fire Science and Engineering
• /
• v.25 no.5
• /
• pp.47-53
• /
• 2011

Fire load in buildings greatly contribute to the time and scale of fire according to the type and quantity of the fire load. Because bookstores have a large quantity of fire load compared with other buildings which may lead to large scale fires, however, their heat release characteristics have been hardly investigated. In this study, to obtain the data applicable for the performance-based fire safety design of bookstores, the specimens representing stacked fire loads were heated in a furnace in compliance with the standard heating curve of ISO834-1:1999 to investigate their heat release characteristics. From the experiment result, the combustion velocity and heat release rate required for performancebased fire safety designs are obtained.

• Journal of fish pathology
• /
• v.17 no.2
• /
• pp.99-103
• /
• 2004

White spot disease by Cryptocaryon irritans broke out among cultured river puffer (Takifugu obscurus) cultured in sea water in Oct. 2001 and May 2004. Many white spots were easily observed on the gills with the naked eyes. The parasites attached on the gills at the base of the gill lamellae. The trophonts penetrated the interlamellar epithelium. Epithelial cell proliferation in interlamellar spaces occurred. PAS- positive mucous cells were prominent in the proliferated epithelium.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.25-34
• /
• 2018

This paper presents a heating source of carbon nanofibers for the efficiency and the drying performance of laundry dryer, and focuses on the applicability-evaluation of its source. To design the proposed heating module, experiments were conducted in terms of surface temperature and surface temperature distribution characteristics of carbon nanofiber lamps. The surface temperature of the lamps increased linearly with increment of a current to flow a lamp and revealing the increasing pattern as the length of the ramps is shorter. The proposed heating source was evaluated based on drying efficiency, moisture evaporation rate at laundry, and internal temperature of a drum during drying process. The drying efficiency satisfied a 45% which is specified in KS C 9319. The moisture evaporation rate and the internal temperature of the drum were respectively 98.88% and $61.1^{\circ}C$, which are similar to that of S's company dryer. From the evaluation and actual drying test results, the proposed carbon nanofiber lamp heating module is considered to be applicable as a heat source for laundry dryer in terms of drying efficiency and drying performance. it is possible to obtain a heat source at a high temperature, an excellent calorific value, an improvement in drying performance, and an effect of sterilizing laundry due to the emission of far-infrared rays. In addition to the applicability, the difference of the drying efficiency between the dryers was analyzed in detail based on the power consumption of the heat sources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.843-854
• /
• 2013

This paper presents experimental research work for the evaluation of ultimate flexural behaviors of prestressed concrete beams with a corroded tendon. In order to evaluate the effects of loss of prestress or loss of tendon area on the ultimate flexural strength of prestressed concrete beams, static load tests are conducted using five prestressed concrete beams. After exposing prestressing tendons in two test beams using 25mm drill bit, the exposed tendons were corroded using an accelerating corrosion equipment to simulate loss of tendon area. During the tests, steel strains, concrete strains and displacements at the center of test beams were measured, and acoustic emission measurements were conducted to detect wire fractures. Based on the test results, evaluation method for predicting flexural strength of prestressed concrete beams with corroded tendons is investigated. In addition, evaluation methods for predicting the existence of corroded tendons in post-tensioned prestressed concrete beams at service loads are discussed.

• Fire Science and Engineering
• /
• v.21 no.4
• /
• pp.25-31
• /
• 2007

The combustion characteristics and combustion heat of sandwich panel cores were analysed using variable external irradiation level. The characteristics such as ignition time, critical heat flux, ignition temperature and surface temperature profile were measured. Fuel samples were exposed to incident heat fluxes from 15 to $50\;kW/m^2$. For the measurement of various combustion characteristics, the size of specimen was $100\;mm\;{\times}\;100\;mm\;{\times}\;50\;mm$ and the samples were 3 different kinds. As results, Type B showed the best characteristics in measurement of combustion heat and ignition temperature and Type C showd the best characteristics in critical heat flux and surface temperature profile than that of the other two. In conclusion, we knew that Type C had the best performance in fire safety from all data of this study.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.483-488
• /
• 2010

ZnO nano-fibrous thin films with various precursor concentrations ranging from 0.2 to 1.0 mol (M) were grown by spin-coating method and effects of the precursor concentration on surface and optical properties of the ZnO nano-ribrous thin films were investigated by using scanning electron microscopy (SEM) and photoluminescence (PL). ZnO nuclei were formed at the precursor concentration below 0.4 M and the ZnO nano-fibrous thin films were grown at the precursor concentration above 0.6 M. Further increase in the precursor concentration, the thickness of the ZnO nano-fibrous thin films is gradually increased. The intensity and the full-width at half-maximum (FWHM) of the near-band-edge emission (NBE) is increased as the precursor concentration is increased. The deep-level emission (DLE) is red-shifted as the precursor concentration is increased.