• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.111.2-111.2
• /
• 2010

삼상슬러리 기포탑 반응기의 설계 및 Scale-up을 위하여 기포탑의 직경변화에 따른 기체-슬러리 계면에서의 물질전달 현상의 Similarity를 검토하고, 기체-슬러리 계면에서의 물질전달 현상과 슬러리 기포탑 반응기의 운전변수 및 반응물들의 물성들과의 연관성을 고찰하기 위하여 삼상슬러리 기포탑의 물질전달계(System)에서 주요 파라메타를 도출하였으며, 이들 파라메터들을 이용하여 슬러리 기포탑반응기의 물질전달 Scaling을 검토하였다. 물질전달계의 주요제어인자로는 기체-액체 부피물질전달계수($k_La$), 슬러리상의 확산도($D_{SL}$), 기포탑의 직경(D), 기포탑 반응기에 유입되는 기체의 유입속도($U_G$), 기포탑 반응기 내부의 연속상인 슬러리상의 표면장력(${\sigma}_{SL}$), 슬러리상과 기체상간의 밀도차(${\rho}_{SL}-{\rho}_G$) 그리고 슬러리상의 점도(${\mu}_{SL}$)등 슬러리 상의 물성을 선정하였으며 중력가속도(g)를 선정하였다. 물질전달계의 Scling을 검토하기위하여 이를 재구성하였으며 기포탑 반응기의 구조와 직경이 변화함에 따라 이들 무차원군의 변화양상을 고찰하였다. 실험적으로 측정된 물질전달계수와 Scaling에 의해 예측된 물질전달계수를 비교 검토함으로써 본 연구의 Correlation의 적용범위를 제시하였다.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2012

This study was conducted to optimize a mixing design of lightweight aerated concrete with the blast furnace slag(BFS) using Box-Behnken method, one of response surface designs. The lightweight aerated concrete with the BFS was made on the conditions of steam curing method at atmospheric pressure. The experimental factors were unit Water(W)/total powder($P_d$) ratio, BFS replacement percentage and Al powder addition based on the total powder (${P_d}^*$%). From the results of the response surface analysis, regression models for dried specific gravity and compressive strength of the lightweight aerated concrete were derived. When the target values for dried specific gravity and compressive strength of the lightweight aerated concrete were set at 0.72 and 4.42 MPa respectively, its optimized mixing conditions driven from the regression models were 0.62 of $W/P_d$ ratio, 35.5% of BFS replacement and 0.05% of Al powder addition. This experimental design model was found to be credible by measuring the dried specific gravity and compressive strength of the sample made from the above mixing conditions.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.516-521
• /
• 2014

Axial and overall heat transfer coefficients were investigated in a bubble column with relatively high viscous and low surface tension media. Effects of superficial gas velocity (0.02~0.1 m/s), liquid viscosity ($0.1{\sim}0.3Pa{\cdot}s$) and surface tension ($66.1{\sim}72.9{\times}10^{-3}N/m$) on the local and overall heat transfer coefficients were examined. The heat transfer field was composed of the immersed heater and the bubble column; a vertical heater was installed at the center of the column coaxially. The heat transfer coefficient was determined by measuring the temperature differences continuously between the heater surface and the column which was bubbling in a given operating condition, with the knowledge of heat supply to the heater. The local heat transfer coefficient increased with increasing superficial gas velocity but decreased with increasing axial distance from the gas distributor and liquid surface tension. The overall heat transfer coefficient increased with increasing superficial gas velocity but decreased with increasing liquid viscosity or surface tension. The overall heat transfer coefficient was well correlated in terms of operating variables such as superficial gas velocity, liquid surface tension and liquid viscosity with a correlation coefficient of 0.91, and in terms of dimensionless groups such as Nusselt, Reynolds, Prandtl and Weber numbers with a correlation of 0.92; $$h=2502U^{0.236}_{G}{\mu}^{-0.250}_{L}{\sigma}^{-0.028}_L$$ $$Nu=325Re^{0.180}Pr^{-0.067}We^{0.028}$$.

• 레미콘
• /
• no.1 s.62
• /
• pp.54-58
• /
• 2000

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.148-150
• /
• 2015

최근 가압경수로 핵연료는 다양한 형태의 원자로의 개발 및 다양한 운전 방식을 요구한다. 장주기 운전이 가능한 고연소도 핵연료의 지속적인 성능 개선이 필요하다. 핵연료에서 가연성 중성자 흡수체(Burnable absorber-BA) 역할은 매우 중요하다. 다양한 원자로 및 다양한 운전방식을 대비하여 BA 제조에 유연성을 고려하면 핵연료 피복관 내부에 직접 코팅하는 것이 바람직하다. 이에 피복관 내부표면에 직접 금속도금이 가능 여부와 기존에 많이 사용하던 전해도금에서 발생되는 기포에 의한 불균질한 도금(핀홀) 문제점 해결 방안을 고안하였다. 본 연구에서는 초임계 이산화탄소와 전해도금액간의 초음파 교반을 통한 강한 진동에 의해 매크로 에멀젼을 형성시켜 피 도금 물질 표면에 얇은 막을 얻는 도금 방법을 적용하였다. 초임계 유체를 이용한 전해도금을 적용한 결과 균질한 얇은 도금 막을 증착 시켰으며, 기포에 의한 핀홀 현상을 억제하였다. 또한 전해도금액의 사용량을 최소화 하여 폐수 발생 문제를 개선하였다.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.49-56
• /
• 2020

In this study, surface modification of CaCO₃ nanoparticles by a silane coupling agent propyltrimethoxysilane (PTMS) was conducted and the effect of surface hydrophobicity on the stability of foam and emulsion was studied in order to test the potential applicability as a foam stabilizer or an emulsifier. The surface modification of CaCO₃ nanoparticles by PTMS was confirmed by FT-IR, DSC and TGA analysis. The atomic concentration of CaCO₃ particle surface treated by PTMS has been also identified by using XRD and XPS analyses. Both floating tests and contact angle measurements were also performed to examine the effect of PTMS concentration on the surface modification of CaCO₃ nanoparticles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.28-28
• /
• 2007

해수 임펠러(impeller) 재료로 사용되고 있는 스테인리스강을 이용하여 케비테이션 발생 시 고체입자 충격에 의한 충격하중 및 침식손상을 조사하였다. 충격하중은 압전센서를 이용하여 측정되었으며, 고체입자충격의 경우 기포붕괴에 비해 전체적으로 높은 충격하중을 가한 것으로 나타났다. 또한 충격하중과 침식손상과의 관계를 고찰하기 위해 침식표면에 형성된 침식핏(pit)을 측정하였으며, 고체입자충격 및 기포붕괴 조건에서의 임계충격하중을 구하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.247-249
• /
• 2011

Pre-foaming, one of the manufacturing way of foamed concrete, is influenced by foaming agent. When the foaming agent diluted with water, surface tension and viscosity are varied. Therefore, this study is reviewing the surface tension, viscosity and unit weight of foam by experimental factor such as foaming agent types(AES, AOS, VS FP) and foam agent dilution concentration (1, 3, 5%) and temperature of materials (5, 10, 20℃). As an expeimental result, the surface tension and viscosity slightly increased with increasing concentrations. Meanwhile, when increasing temperature, the viscosity has decreased. FP produce relatively stable foams only in case 3% or more, which produce unstable foams containing large amount of water content by decreasing only insignificant surface tension when diluted at concentration of 1%.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.587-592
• /
• 2009

Heat transfer model and energy dissipation rate were investigated to examine the heat transfer mechanism in bubble columns with continuous operation. The energy dissipation rate($E_D$) obtained from the unsteady state heat transfer model based on the surface renewal theory was significantly small, comparing with the hydrodynamic energy dissipation rate($P_v$) calculated from the overall hydrodynamic energy balance based on the behaviors and holdups of gas and liquid phases in the column. It was found from these results that the energy dissipation rate based on the surface renewal theory is independent of the hydrodynamic energy dissipation rate obtained from the overall hydrodynamic energy balance in the bubble column, in considering their mechanism. The different two energy dissipation rates were correlated in terms of operating variables within this experimental conditions, respectively.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.720-726
• /
• 2009

Hydrodynamic similarity was investigated in pressurized three-phase slurry bubble columns by selecting the bubble holdup and pressure drop as objective functions, for the effective design and scale-up of it. In addition, effects of operating variables on the bubble holdup with variation of column diameter were also analyzed. Gas velocity($U_G$), viscosity(${\mu}_{SL,eff}$) and surface tension(${\rho}_{SL}$) of slurry phase, density difference between the slurry and gas phases(${\rho}_{SL}-{\rho}_G$) depending on the operating pressure, pressure drop per unit length(${\Delta}P/L$), column diameter(D) and gravitational acceleration(g) were chosen as governing parameters in determining the bubble holdup and pressure drop in the column. From the dimensional analysis, four kinds of dimensionless groups were derived from the 7 parameters and 4 fundamental dimensions. Effects of dimensionless groups such as Reynolds, Froude and Weber numbers on the bubble holdup in the column were discussed. The pressure drop and bubble holdup could be predicted from the correlation of dimensionless groups effectively, which could be used as useful information for the design and scale-up of pressurized slurry bubble columns.