• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.203-203
• /
• 2001

패선/구부림 가공은 후가공의 일부분으로서. 박스가공 시 종이에 패션치기와 구부림 공정이 들어가게 되며 이때 종이표면이 약할 경우 금이가는 현상이 발생한다. 본 연구 는 이러한 가공과 다층판지의 물성이 패선/구부림 적성에 영향을 미치는가에 대한 연 구로서 2000년도 추계논문발표시 종이 물성 중 패션/구부림 가공에 영향을 주는 것으 로 표면층의 층간결합력과 내절도 그리고 인장강도가 중요한 변수로 작용하는 결과를 얻었으며 이후 이들 영향인자 중 핵심영향인자의 도출을 위하여 침엽수를 배합하지 않 은 상태에서 상질고지 재생펄프를 고해 처리하여 특성을 향상시켜 실제 공정에서 실험 하였다. 1차 실험은 공정실험 전 예비 실험으로서 재생펄프를 공장 refiner를 사용하여 고해 처리하여 강도향상 효과를 분석하였다. 분석결과 인장강도는 증가하나 내절도 향상은 기대에 미치지 못하는 것으로 나타났다. 이에 따라 1차 공정실험 조건을 부착량을 향상 시켜 인장강도를 침엽수 펄프 배합수준으로 끌어올리는 방법을 선택하였으며 그 결과 패선/구부림 적성이 기존대비 양호한 결과를 얻었다. 즉 인장강도 향상으로 침엽수 펄 프를 대체할 수 있다는 결론을 얻었다. 2차 실험은 부착량 대선 refiner를 사용하여 상 질고지 재생펄프를 고해 처리하여 인장강도를 향상시켜 생산하였다. 실험결과 인장강도 가 침엽수펄프 배합 시 대비 동등이상 수준에 있을 경우 패션/구부린 가공 시 금이가 는 터짐문제는 발생하지 않는 것으로 나타났다. 3차 실험은 두 차례 동안 실시된 공정 실험을 기준으로 refining 처리와 부착량 기준을 설정하고 장시간 생산하여 그 특성을 측정하였다. 실험결과 표면층의 인장강도가 낮아질 때 패선/구부림 적성이 약해지는 경 향을 보였으며 인장강도가 기존 침엽수펄프 배합대비 동등이상일 경우 패선/구부림 가 공적성이 양호하게 나타났으며 실제 가공업체에서도 터짐 문제가 발견되지 않았다. 결론적으로 표면층의 인장강도가 패션/구부림에 가장 중요한 변수로 작용하며 어떠 한 형태로 표면층의 인장강도를 향상시킬 경우 침엽수 펄프는 재생펄프로 대체가 가능 할 것으로 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.194-195
• /
• 2009

본 연구에서는 고속전단 강도에 표면 처리의 변화가 미치는 영향에 대해 연구하고자 하였다. 표면 처리를 ENIG, ENEPIG, OSP로 하여 고속전단시험을 수행하였다. 고속전단 결과 SAC105의 전단 강도 값은 ENIG가 가장 작았고, ENEPIG가 가장 높았다. SAC305의 전단 강도 값은 ENIG가 가장 작았고, OSP와 ENEPIG는 비슷한 값을 나타냈다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2021

Purpose: The purpose of this study is to investigate the effect of surface polishing and fabrication method on the flexural strength of temporary restorative resin. Materials and Methods: Each of four fabrication methods was used to make 30 temporary restorative resin specimens and the specimens were divided into two groups depending on whether they were polished by mechanical polishing. Specimens were stored in 37℃ thermostat for 24 hours. Flexural strength was measured using a universal testing machine (UTM). The data obtained through the experiment were analyzed with Two-way ANOVA, Tukey's HSD test and Paired t-test. Results: CAD/CAM milling group showed the highest flexural strength regardless of surface polishing. In decreasing order, the flexural strength of the other fabrication method group was as follows SLA 3D printing, DLP 3D printing, and Conventional method group. Conclusion: Surface polishing did not affect flexural strength of the temporary restorative resin (P > 0.05). However, there were statistically significant differences in flexural strength depending on fabrication method (P < 0.05).

• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.507-515
• /
• 2001

Significant improvements in bond strength between new and existing concrete can be achieved through the modification of the new concrete by latex. This study focuses on the investigation of bond strength of latex modified concrete. Pull-out bond test and uniaxial direct tensile bond test are adopted for evaluating the adhesion characteristics of latex modified concrete to conventional concrete substrate. The main experimental variables are test methods, latex-cement ratio, surface preparations and moisture levels. The results are as follows; The increase of latex-cement ratio substantially improves the adhesion between latex modified concrete and substrate. The effects of surface preparation at substrate into the bonding of latex modified concrete are quite different according to the conditions of surfaces. Thus, an adequate surface preparations are essential for good bond strength. Because the moisture level of the substrate may be critical to achieving bond, optimum moisture condition for a conventional concrete has evaluated in this study. The saturated condition of surface is the most appropriate moisture level among the considered, followed by dry condition and wet condition.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.727-738
• /
• 2023

In concrete, the interface between the aggregate and cement paste is often the most critical factor in determining strength, representing the weakest zone. Lightweight aggregate, produced through expansion and firing of raw materials, features numerous surface pores and benefits from low density; however, its overall aggregate strength is compromised. Within concrete, diminished aggregate strength can lead to aggregate fracture. When applying lightweight aggregate to concrete, the interface strength becomes critical due to the potential for aggregate fracture. This study involved coating the surface of the aggregate with blast furnace slag fine powder to enhance the interfacial strength of lightweight aggregate. The impedance of test specimens was measured to analyze interface changes resulting from this surface modification. Experimental results revealed a 4% increase in compressive strength following the coating of the lightweight aggregate surface, accompanied by an increase in resistance values within the impedance measurements corresponding with strength enhancement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.73-81
• /
• 2013

Purpose: The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength of zirconia ceramic to 3 resin cements. Materials and methods: A total of 143 disk-shaped Zirconia blocks (HASS Co., Gangneung, Korea) were randomly divided into three treatment groups: (1) only 50 ${\mu}m$ $Al_2O_3$ sandblasting, (2) 50 ${\mu}m$ $Al_2O_3$ sandblast and zircona liner, (3) 50 ${\mu}m$ $Al_2O_3$ sandblasting and Rocatec (3M ESPE, Seefeld, Germany). Bistite II (Tokuyama Dental Co., Japan), Panavia F (Kuraray Medical, Japan), and Superbond C&B (Sun Medical, Japan) were used to cement onto the zirconia. After 24h of storage in distilled water, shear bond strength was evaluated. High value group was re-tested after thermocycling at 5,000 cycles(5-$55^{\circ}C$). Shear bond strength data were analyzed with one-way ANOVA, two-way ANOVA test and Post Hoc Test (${\alpha}$=.05). Shear bond strength data before and after thermocycling were analyzed with Independent sample T test (${\alpha}$=.05). Results: Super-bond C&B treated with Rocatec showed the most high shear bond strength. Super-bond C&B groups resulted in significantly higher than other cement groups (P<.05). Rocatec groups resulted in significantly higher than other surface treatment groups (P<.05). Shear bond strength has increased in Panavia F treated with Zirconia liner (P<.05). After thermocycling, shear bond strength was increased in Super-bond C&B treated with Rocatec but decreased in other groups (P<.05). Conclusion: Super-bond C&B cement resulted the highest shear bond strength and Rocatec system enhanced the shear bond strength. After thermocycling, shear bond strength has decreased in most resin cements except Super-bond C&B treated with Rocatec.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.417-431
• /
• 2020

In this study, a fundamental investigation was made on how to use LiDAR technology to determine the degree of weathering and alteration of rock mass. The purpose of the study was to identify the affecting parameters to LiDAR intensity and to quantitatively assess the relations among them through laboratory-scale experiment. A few potential affecting parameters were selected including scanning distance, incidence angle, surface roughness, surface color, mineral composition, and water saturation. In the experiment, FARO LiDAR unit was used for twelve different types of specimen. It was observed that the intensity was affected by, in the order of importance, surface color, incidence angle, scanning distance, property of rock, water condition, and surface roughness.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.347-348
• /
• 2015

Ni 도금 및 표면 거칠기에 따른 열전모듈의 접합강도 특성을 알아보기 위해 Bi-Te 소재 위에 Sand-blasting 방법을 사용하여 표면 거칠기를 조절하고, Ni-P 무전해 도금을 수행하였다. 접합강도 측정 및 표면 성분을 분석하기 위해 전단응력 측정기, FE-SEM을 이용하였다. Sand-blasting과 Ni 도금을 실시한 시편이 sand-blasting과 도금을 미실시한 대조군보다 전단응력이 높았고, 큰 방 수의 sand로 sand-blasting 한 시편일수록 전단응력이 더 높은 경향성을 보였다.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.483-490
• /
• 2000

The dental gold alloy shows a lower bond strength than the natural teeth in bracket bonding, and this can be a possible source of subsequent bond failure. This study aims to evaluate the effect of various gold alloy surface treatment techniques on shear bond strength between the orthodontic adhesives and the gold alloy and to find ways of increasing the bond strength. Two hundred and forty specimens made of the dental fold alloy were divided into twelve groups based on the combination of surface treatment methods(non-surface treatment, sandblasted, sandblasted plus tin-plated, and sandblasted plus intermediate adhesive) and adhesive systems (Ortho-one, Panavia 21, Superbond C&B). The specimens with bonded brackets were placed in distilled water at $37^{\circ}C$ for 24 hours and shear bond strength was measured by a universal testing machine. The results were as follows: 1. All surface-treated groups showed a significantly higher shear bond strength than non-surface-treated groups. 2. The sandblasted plus tin-plated group showed a significantly higher shear bond strength than the sandblasted group only when Panavia 21 was involved. 3. The sandblasted plus intermediate adhesive group showed a significantly higher shear bond strength than sandblasted group regardless of the type of adhesive used. 4. Of the three resin adhesive types, the Superbond C&B showed the highest bond strength, followed by Panavia 21 and Ortho-one. These findings suggest that a combination of sandblasting and intermediate resin treatment is desirable in order to enhance bracket bond strength regardless of adhesive types.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.41-42
• /
• 2014

현대 산업에서 철은 매우 중요한 재료이다. 다양한 산업적 요구에 맞게 제철산업에서도 다양한 성질의 강을 개발하고 생산하고 있다. 강의 주요 물성으로는 인장강도, 항복강도, 연신율 등이 있으며 이러한 물성들을 향상시키거나 변경하는데 다양한 첨가원소와 제조 공법들이 적용되어진다. 본 연구에서는 그 중 합금 원소를 첨가하여 강도를 높이는 초고강 강에 대해서 화성처리 특성을 연구하고 그에 영향을 미치는 인자에 대해서 분석하였다. 그리고 화성처리 공정을 개발하여 초고강도강의 인산염특성을 향상 시켰다.