Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.113-113
/
2010
유비쿼터스 시대를 맞이하여 현재의 전자제품은 초고주파 환경에서의 소형화된 마이크로파 소자를 요구하고 있다. 마이크로파 대역에서 세라믹 소재는 대부분의 폴리머 소재에 비해 낮은 유전손실 값을 보이고 있어 향후 확대되는 고주파화에 적합한 소재로 평가되고 있다. 하지만 세라믹 재료는 깨지기 쉬운 특성을 가지고 있어 공정 및 취급이 어려우며 높은 소결온도를 가지고 있어 융점이 낮은 재료와의 집적화에 있어서 난점을 가지고 있다. 이를 위해 본 연구실에서는 실온에서 세라믹을 비롯한 금속 및 폴리머 재료의 치밀한 코팅막의 성막 및 이종 접합이 가능한 Aerosol Deposition (AD 법)에 주목하였고 마이크로파 소자 제작 공정으로서 AD 법의 응용 가능성을 연구하였다. 마이크로파 소자의 기판으로서는 AD 법을 이용하여 유전손실이 낮고 플렉서블한 $Al_2O_3$-PTFE 혼합 기판을 제작하고 적용하였다. 금속 선로 패터닝 제작 공정으로는 도금법이 대표적이지만 고비용 및 복잡한 공정 절차, 폐화학용액으로 인한 환경문제 등의 단점을 지니고 있어 이를 대체하는 금속 선로 패터닝 공정이 절실히 요구되고 있다. 이를 위해 본 연구에서는 AD 법을 이용하여 금속 필름을 제작하고 대체 공정으로서의 가능성을 확인하였다. 하지만 AD 법을 이용한 세라믹 필름 제작에 관한 연구는 크게 활성화되어 있는 반면에 금속 필름의 제작, 특성 측정 및 개선에 관한 연구는 그에 비해 미비한 수준이다. 이를 위해 이번 연구에서는 AD 법을 이용하여 금속 필름을 성막 시에 영향을 미치는 요인을 고찰하였으며 또한 마이크로파 소자의 도체 손실에 크게 관계되는 금속 필름의 비저항 특성의 측정 및 개선에 관한 연구를 수행하였다. 이를 위해 본 연구에서는 정전장 시뮬레이션을 활용하여 AD 법으로 성막된 금속 필름의 정밀한 비저항 측정에 관한 연구방법을 마련하고 후열처리를 통한 비저항 특성을 개선시키는 연구를 진행하였다.
Kim, Seung-Taek;Jung, Yeon-Kyung;Park, Sae-Hoon;Yoo, Myong-Jae;Park, Seong-Dea;Lee, Woo-Sung
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.06a
/
pp.340-341
/
2008
본 논문에서는 미세 패턴을 구현하기 위해 폴리머 소재의 조성에 따른 공정의 영향에 대해서 연구를 하였다. 제작된 본딩 필름은 난연계 에폭시수지와 고내열 특성을 위해서 경화제 조화 성분 폴리머를 이용하였다. 또한, CTE 값을 향상하기 위해서 필러로서 SiO2 분말을 이용하였다. 조성물은 혼합하여 슬러리를 만들고, 테입 캐스터를 이용하여 필름을 제작하였다. 제작된 필름은 150 및 160도의 온도에서 가열 가압하여 경화하였다. 제작된 수지는 유전율 3.2의 유전율과 loss tan 6값이 0.015값을 나타내었다. 또한 제작된 본딩 필름의 조화특성 연구를 위해서 경화조건, 스웰링 조건, 디스미어 시간에 따른공정 변화의 영향에 대해 고찰하였으며 제작된 시편의 조도는 SEM으로 관찰하여 조화성분 함량에 따른 최적 조건을 선정하였다.
Lee Young-Jin;Kim Tae-Young;Lee Kwang-Ryeol;Yang In-Sang
Journal of the Korean Vacuum Society
/
v.13
no.4
/
pp.157-163
/
2004
Dependence of residual compressive stress of diamond-like carbon (DLC) films on relative humidity was investigated. Polymeric, graphitic and diamond-like carbon films were prepared by r.f.-PACVD using methane or benzene with the negative self bias voltage of the substrate ranging from -100 to -800 V. In-situ measurements of the residual stress were carried out in an environment chamber where the relative humidity was varied from 10% to 90%. In dense DLC film of high residual compressive stress and hardness, we could not observe any change in the residual compressive stress with relative humidity. However, in the cases of graphitic and polymeric DLC films, abrupt change in the residual stress occurred by changing the relative humidity. The quantity of the stress change was inversely proportional to the film thickness, which means that the stress change with humidity is not due to the penetration of the water molecule into the film structure, but due to surface interaction between water molecules and film surface.
Proceedings of the International Microelectronics And Packaging Society Conference
/
2002.05a
/
pp.142-147
/
2002
폴리머/세라믹 복합체는 내장형 캐패시터(embedded capacitor)의 유전 재료로 많은 관심을 불러 일으키고 있다. 본 연구는 BaTiO$_3$분말의 크기와 함량이 에폭시/BaTiO$_3$복합체 캐패시터의 유전 상수와 누설전류에 미치는 영향에 대해 살펴보고 이에 대해 고찰하고자 하였다. BaTiO$_3$분말이 67vo1% 함유된 Epoxy/BaTiO$_3$composite 필름의 유전상수는 전반적으로 사용한 BaTiO$_3$분말의 크기가 커짐에 따라 증가하였다. 이것은 입자의 크기가 증가함에 따른 입자의 유전상수의 증가 때문이며 XRD 분석을 통해 입자의 크기가 증가함에 따라 tetragonality가 증가함을 확인하였다. 복합체 필름의 누설전류도 또한 사용한 입자의 크기가 커짐에 따라 증가하였으며 이는 분말의 크기가 증가함에 따라 단위길이 당 입자의 수가 감소하는 것으로, 단위 길이 당 입자의 수가 감소하여 전류의 흐름을 방해하는 입자/폴리머/입자 계면의 수가 감소하기 때문이다. 분말의 함량에 따른 유전상수는 unimodal과 bimodal의 경우 각각 73vo1%와 80vo1%에서 최대 값을 나타냈으며 그 이상에서는 감소하는 것이 관찰되었는데 이는 과량의 분말이 조밀 충전을 깨고 필름의 밀도를 낮추기 때문이었다. 누설전류의 경우 unimodal과 bimodal 각각에 대해 73vo1%와 80vo1%에서 급격한 증가를 관찰 할 수 있었으며 이는 percolation 현상의 발생에 의해 입자와 입자간에 접촉이 이루어져 BaTiO$_3$분말을 따라 전류가 잘 흐를 수 있는 conduction path가 형성 되기 때문이다.
This study was made on the poly(vinyl acetate) (PVAc) and poly(vinyl acetate- ethylene) (VAE) emulsion polymer blend which used PVA as protective colloid, and the PVA used as protective colloid was existed in each emulsion film before blend and even in the film after the blend consecutively. It makes us expect excellent adhesive power among particles that form the blend. Emulsion blends with different Tg are important target of concerning, and PVAc/VAE emulsion blend suggested simple and excellent research method. As a result of blend, elongation was lowered by the increase of PVAc, and the plasticizer used in making PVAc affected on the Tg of blend and lowered Tg of VAE emulsion, and the synergy effect of two blends was seen for the tensile strength, thermal resistance, and adhesive strength.
Diffusion of water in hardened cement concrete and mortar influences on the dry shrinkage. creep. modulus of' elasticity, etc. In general, water loss through drying process in polymer-modified concrete and mortar is small compared with that of unmodified concrete and mortar due to the films formed by polymer as cement modifieder. The purpose of this study is to investigate the diffusion process of water in the polymer-modified mortars. The polymer-modified mortars using three polymer dispersions and epoxy resin are prepared with various polymer-cement ratios, and water diffusion coefficient of polymer-modified mortars according to inside water content is calculated. From the test results, the water diffusion coefficient of polymer modified mortars i s smaller than that of unmodified mortars and decreases with increasing polymer cement ratio.
Journal of the Society of Cosmetic Scientists of Korea
/
v.38
no.2
/
pp.133-138
/
2012
The purpose of this study was to examine the correlation between physical properties of dried coacervate films and dry feel for shampoo composition. Simple shampoo compositions were made of two different cationic charge density polymers in the same surfactant compositions. The simple shampoo compositions were diluted with distilled water to make coacervate. Formed coacervate was collected by centrifuge (3,000 rpm, 30 min). Coacervate was coated on the glass plates and dried in drying oven (for 1 h, $50^{\circ}C$) to make the thin film. We carried out an experiment on measurement of contact angle, moisture loss ratio and SEM image analysis of the dried coacervate film. Dry feelings of the shampoos were evaluated by panel using hair tresses. Results show that the properties of dried coacervate films affect the dry feel of the after shampooing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.