• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.45-52
• /
• 1996

고리 1 호기 원자로 감시？슐에서의 고속중성자 플루언스를 계산하기 위하여 MCNP코드로 3차원 모델링을 하였다. 중성자선원은 MCNP에 의해 계산된 핵연료봉출력분포를 사용하였고 원자로심부터 원자로 압력용기 밖까지 1 MeV이상의 중성자를 수송시켰다. 감시？슐은 실제의 같은 크기로 모델링하였고 감시？슐안의 시편은 원자로 압력용기와 같은 재질의 직육면체로 가정하였다. 그리고 MCNP에 의해 감시시편내의 방사화 시료의 핵반응단면적을 계산하였다. 또한 MCNP에 의해 이론적으로 계산된 감시？슐에서 중성자 플루언스와 기존의 감시시험에서 측정된 포화방사능으로 부터 계산된 실험적 감시？슐 중성자 플루언스를 비교하였다. 이론적 ？슐플루언스와 실험적 ？슐플루언스의 비는 대체로 1.0에서 크게 벗어나지 않았으나 감시시험과 시편에 따라 크게 벗어나는 경우도 있었다. MCNP에 의한 유효반응단면적의 계산방법이 기존의 방법보다 모델링 및 계산의 불확실성을 최소화 할 수 있으므로 이번 연구에서 고려하지 못한 원자로심의 연소도를 고려한다면 매우 신뢰성이 높은 결과를 얻을 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1C
• /
• pp.1-9
• /
• 2009

In this study, the influence of wetting band depth by continuous rainfall and the magnitude of wetting front suction on the stability of slopes in weathered soils were investigated by using finite element programs SEEP/W and SLOPE/W. Three different intensities of rainfall (10mm/hr, 30mm/hr, 50mm/hr) were chosen, and the total duration of rainfall was 96 hours. Three infinite slopes with the inclination of 1:1.5 and 1:1.8, 1:2.0 were considered and the typical properties and the shear strength parameters of the weathered soil were applied. It is shown that rainfall duration plays an important role in slope stability. Based on the analytical results, it is found that as the rainfall duration increases, the wetting band depth also increases. Also, the increasing rate of the wetting band depth was decreased as the soil density was increased. These results come from the decrease of the coefficient of permeability and the increase of the soil suction. Finally, it is also shown that the safety factors of slopes by unsaturated analysis are mostly larger than those by saturated analysis. Therefore, commonly used saturated analysis may substantially underestimate the degree of safety factor in realistic situations.

• Journal of Chest Surgery
• /
• v.41 no.6
• /
• pp.679-686
• /
• 2008

Background: Cellular remnants in the bioprosthetic heart valve are known to be related to a host's immunologic response and they can form the nidus for calcification. The extracellular matrix of the decellularized valve tissue can also be used as a biological scaffold for cell attachment, endothelialization and tissue reconstitution. Thus, decellularization is the most important part in making a bioprosthetic valve and biological caffold. Many protocols and agents have been suggested for decellularization, yet there ave been few reports about the effect of a treatment with hypotonic solution prior to chemical or enzymatic treatment. This study investigated the effect of a treatment with hypotonic solution and the appropriate environments such as temperature, the treatment duration and the concentration of sodium dodecylsulfate (SDS) for achieving proper decellularization. Material and Method: Porcine aortic valves were decellularized with odium dodecylsulfate at various concentrations (0.25%, 0.5%), time durations (6, 12, 24 hours) and temperatures ($4^{\circ}C$, $20^{\circ}C$)(Group B). Same the number of porcine aortic valves (group A) was treated with hypotonic solution prior to SDS treatment at the same conditions. The duration of exposure to the hypotonic solution was 4, 7 and 14 hours and he temperature was $4^{\circ}C$ and $20^{\circ}C$, respectively. The degree of decellularization was analyzed by performing hematoxylin and eosin staining. Result: There were no differences in the degree of decellularization between the two concentrations (0.25% 0.5%) of SDS. Twenty four hours treatment with SDS revealed the best decellularization effect for both roups A and B at the temperature of $4^{\circ}C$, but there was no differences between the roups at $20^{\circ}C$. Treatment with hypotonic solution (group A) showed a better ecellularization effect at all the matched conditions. Fourteen hours treatment at $4^{\circ}C$ ith ypotonic solution prior to 80S treatment revealed the best decellularization effect. The treatment with hypotonic solution at $20^{\circ}C$ revealed a good decellularization effect, but his showed significant extracellular matrix destruction. Conclusion: The exposure of porcine heart valves to hypotonic solution prior to SDS treatment is highly effective for achieving decellularization. Osmotic treatment with hypotonic solution should be considered or achieving decellularization of porcine aortic valves. Further study should be carried out to see whether the treatment with hypotonic solution could reduce the exposure duration and concentration of chemical detergents, and also to evaluate how the structure of the extracellular matrix of the porcine valve is affected by the exposure to hypotonic solution.

• Journal of Chest Surgery
• /
• v.38 no.4 s.249
• /
• pp.277-283
• /
• 2005

Arterial oxygen saturation $(SaO_2)$ instability frequently takes place after systemic-pulmonary shunt without shunt occlusion. We analyzed actual incidence and risk factors for $SaO_2$ instability after shunt operations, and possible mechanisms were speculated on. Material and Method: Ninety three patients, who underwent modified Blalock-Taussig shunt from January 1996 to December 2000, were enrolled in this study. Adequacy of shunt was verified in all patients, either by ensuing one ventricle or biventricular repair later on or by appropriate pulmonary artery growth on postoperative angiogram. Age, body weight, hemoglobin level at operation were 3 day to 36 years (median: 1.8 months), 2.5kg to 51kg (median: 4.1kg) and $10.7\~24.3$ gm/dL (median: 15.2 gm/dL) respectively. Preoperative diagnoses were functional single ventricle with pulmonary stenosis or atresia in 39, tetralogy of Fallot in 38 and pulmonary atresia with intact ventricular septum in 16. Pulmonary blood flow (PBF) was maintained pre-operatively by patent ductus or previous shunt in 64 and by forward flow through stenotic right ventricular outflow tract (RVOT) in 29. $SaO_2$ instability was defined as $SaO_2$ less than $50\%$ for more than 1 hour with neither anatomic obstruction of shunt nor respiratory problem. Result: 10 patients $(10.7\%)$ showed $SaO_2$ instability after shunt operation. After shunt occlusion was ruled out by echocardiogram, they received measures to lower pulmonary vascular resistance (PVR), which worked within a few hours in all patients. Risk factors for $SaO_2$ instability included older age at operation (p=0.039), lower preoperative $SaO_2$ (p=0.0001) and emergency operation (p=0.001). PBF through stenotic RVOT showed marginal statistical significance (p=0.065). Conclusion: $SaO_2$ instability occurs frequently after shunt operation, especially in patients with severe hypoxia pre-operatively or unstable clinical condition necessitating emergency operation. Temporary elevation of pulmonary vascular resistance is a possible mechanism in this specific clinical setting.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.327-338
• /
• 2022

This study aims to empirically and statistically predict soil depths across areas affected by landslides. Using soil depth measurements from a landslide area in Korea, two sets of soil depths are calculated using a Z-model based on terrain elevation and a probabilistic statistical model. Both sets of calculation results are applied to derive landslide risk using the saturated infiltration depth ratio of the soil layer. This facilitates analysis of the infiltration of rainfall into soil layers for a rainfall event. In comparison with the probabilistic statistical model, the Z-model yields soil depths that are closer to measured values in the study area. Landslide risk assessment in the study area based on soil depth predictions from the two models shows that the percentage of first-grade landslide risk assessed using soil depths from the probabilistic statistical model is 2.5 times that calculated using soil depths from the Z-model. This shows that soil depths directly affect landslide risk assessment; therefore, the acquisition and application of local soil depth data are crucial to landslide risk analysis.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.114-127
• /
• 2018

This study aimed to investigate the levels of Obstructive Sleep Apnea (OSA), health behavior and sleep quality and to examine the predictors of OSA in patients with ischemic cardio-cerebrovascular disease. 141 patients who were admitted to the vascular unit were recruited and surveyed using structured questionnaires. Saturation of Peripheral Oxygen (SpO2) was measured at three time points using a pulse oximeter. Data were analyzed using SPSS/WIN 20.0. The mean age of the subjects was $64.4{\pm}11.1$ years and 61% was men. The 21.3%(n=30) of the subjects were classified as high-risk for OSA by the cut point and 71.6%(n=101) had low sleep quality. OSA high-risk group showed significant difference in SpO2 in the middle of sleep (p=.006) and at the end of sleep (p=.004) compared to the low-risk group. Multiple logistic regression analysis showed that perceived frequent snoring, smoking, obesity, lack of exercise among health behavior were found as predicting factors on OSA. OSA or persistent snoring should be recognized as a cardiovascular risk factor in the cardiovascular nursing practice. In addition to early treatment of OSA, education and counseling should be provided to patients and their family for prevention of secondary recurrence.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Journal of Haehwa Medicine
• /
• v.21 no.1
• /
• pp.125-133
• /
• 2012

본 논문은 피부미백에 관한 실험적 연구로서, 봉선화(Impatiens balsamina Linne)의 성분 중에서 하이드록시-나프타-퀴논(hydroxynaphthoquinone)이 멜라닌 생성억제 효능, 색소침착 저해 효과 등의 미백 활성이 있는 것으로 밝혀졌다. 피부흑화(melanogenesis)는 멜라닌 색소생성세포(melanocyte)에서 자외선 등의 자극에 대한 방어기작으로 멜라닌 생성 활동이 증가되고 이로 말미암아 만들어진 다량의 멜라닌이 각질형성세포(keratinocyte)로 전이되어 피부 표피층에 축척된 결과이다. 비록 멜라닌이 피부에 보호작용을 하나 피부의 과색소 침착은 기미, 주근깨, 피부염증 후의 피부흑화, 노인성 색소반점 등을 일으키며 이로 인해 피부미용 상의 불편뿐만 아니라 정신적으로 부정적인 영향을 미쳐 사회활동에 불편을 초래하기도 한다. 멜라닌 생성 과정은 아미노산의 일종인 티로신(tyrosine)에 티로시나제(tyrosinase)라는 효소가 작용하여 도파(DOPA), 도파퀴논(dopaquinone)으로 바뀐 후 비효소적인 산화 반응을 거쳐 만들어 지며, 이것이 피부 내에 이상 침착하여 기미, 검버섯 등이 생기는 것이라고 알려져 있다. 이와 같은 색소침착, 기미, 반점 등의 완화, 예방 및 치료에는 멜라닌 생성을 억제하는 물질, 예를 들면 하이드로퀴논(hydroquinone), 알부틴, 비타민 C 및 그 유도체 등이 개발되어 사용되고 있으나 이 중, 하이드로퀴논은 일단 효과가 인정되고 있지만 감작성이 있기 때문에 일반적으로 사용이 제한되고 있다. 아스콜빈산은 쉽게 산화되어, 이를 배합한 제품에는 변색, 변취가 되는 문제를 야기하고, 식물추출물 유래의 물질들은 식물의 산지에 따라 효능의 차이가 심하여 제품의 균질성이 유지되기 어렵다. 이러한 이유로 많은 멜라닌 생성을 억제하는 물질을 개발하기 위한 연구들이 계속 진행하고 있다. 2-히드록시-[1,4]나프토퀴논 유도체는 다음과 같은 구조를 나타낸다. 상기 구조에서 R은 포화 혹은 불포화된 직쇄 또는 분지쇄의 알킬로서, 바람직하게는 C1 내지 C10의 포화 혹은 불포화된 직쇄 또는 분지쇄의 알킬이고, 보다 바람직하게는 C1 내지 C5의 포화 혹은 불포화된 직쇄 또는 분지쇄의 알킬이다. 실험에 활용된 화합물은 다음과 같은 반응식으로 얻어졌다. 2-히드록시-[1,4]나프토퀴논과 포타슘카보네이트(K2CO3)를 아세토니트릴에 용해한 후, 저온수조로 냉각하고 알킬할라이드를 적당한 당량비로 천천히 적하하여 히드록시기와 에테르(ether) 반응을 통하여 얻어질 수 있다. 상기 반응식에서 R은 C1~10의 포화 또는 불포화된 알킬기로서 직쇄형 또는 분지쇄형 모두 가능하다. 상기 화합물인 2-히드록시-[1,4]나프토퀴논(2-hydroxynaphthoquinone)은 배양된 쥐의 멜라노마 세포에 대하여 하이드로퀴논과 대등한 멜라닌 생성 억제효과를 보였다. 하이드로퀴논은 저농도에서 강력한 멜라닌 생성 억제효과를 보이지만 상기 화합물들은 보다 낮은 농도에서도 세포독성을 나타내지 않으며 하이드로퀴논보다 높은 멜라닌 생성 억제 효과를 보였다.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.153-168
• /
• 2003

The objective of this present study is to understand long term(500 years) thermohydromechanical interaction behavior in the vicinity of a repository cavern on the joint location and repository depth variations. The model includes a saturated discontinuous granitic rock mass, PWR spent nuclear fuel in a disposal canister surrounded with compacted bentonite inside a deposition hole, and mixed bentonite backfilled in the rest of the space within a repository cavern. It is assumed that two joint sets exist within the model. Joint set 1 includes joints of 56$^{\circ}$ dip angle, spaced at 20 m, and joint set 2 is in the perpendicular direction to joint set 1 and includes joints of 34$^{\circ}$ dip angle, spaced at 20 m. In order to understand the behavior change on the joint location variations, 5 different models of 500m in depth are analyzed, and additional 3 different models of 1000 m in depth are analyzed to understand the effect of depth variation.

• Korean Journal of Weed Science
• /
• v.6 no.1
• /
• pp.7-12
• /
• 1986

This experiment was conducted to investigate effects of different water depths on emergence, emerged soil depth and growth of E. crus-galli in Seoul, Korea. Plant number of emergence was decreased with deepened water depth, and dry weight of plant was especially negatively affected. However, a few E. crus-galli were emerged under 24 cm water depth. Soil depth of germination was increased as water depth decreased, and a few E. crus-galli were emerged below 10 cm soil depth under - 12 ㎝ water depth. But most E. crus-galli were emerged in ca. 2 cm soil depth under water depth over 0 cm.