• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.315-316
• /
• 2000

유해한 작업 환경지역, 공장밀집 지역 또는 주변 주거 지역의 대기에서 발생하는 악취성분 및 휘발성유기화합물은 환경규제 물질로 분류되고 국내적으로도 이들의 검출 및 정확한 정량적 분석을 위한 연구가 활발하게 진행되고 있다. 일반적으로 이들 성분들은 대기중에 미량으로 존재하기 때문에 흡착관 및 canister등에 의한 시료의 포집을 행하고 이들 분석시료를 실험실에서 저온농축과정을 거쳐 GC/FID 혹은 GC/MS등을 사용하여 정량분석을 실시한다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.479-480
• /
• 2003

미세 입자의 포집효율을 향상시키고 집진필터의 수명을 연장시키기 위해 여과집진 장치에 전기집진 기술을 접목시켜 미세 입자의 제어 성능을 향상시키기 위한 다단계 집진장치에 대해 많은 연구가 진행되어 왔다(Hautanen, 1996). 그 가운데 전기장 내에서의 입자 응집을 이용한 미세입자의 제거는 전기집진기의 효율을 높이기 위한 방법의 하나로 제시되었고(Lehtinen, 1996), 교류 전기장 내에서의 입자들의 충돌로 인하여 미세입자의 크기가 성장하여 전기 집진 장치에서 미세입자의 제거효율이 상승한다는 연구결과가 발표되었다(Watanabe, 19950. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.227-228
• /
• 2002

대기오염물질 중 입자상물질(particulate matter, PM)의 크기분포 측정은 주로 다단임팩터(cascade impactor)에 의해 이루어지고 있다. 임팩터 각 단에 포집된 입자의 무게를 측정하여 입자상물질의 크기 분포로 환산하는 다단임팩터는 입자의 샘플링에 많은 시간이 소모되며 필터의 전처리 및 무게측정과정이 번거롭고, 시간에 따른 농도분포의 추이를 파악할 수 없는 단점이 있다. (중략)

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.67-73
• /
• 1995

In order to study of characteristics of collected filter as analysis of carbon in airborne particulate matters by Elemental Analyzer, quartz fiber filter and glass fiber filter were used. The results are followed as; There was no difference of confidence in collection rate of airborne particulate matters between quartz fiber filter and glass fiber filter. Airborne particulate matters were collected on both filters evenly and the use of quartz fiber filter is better than glass fiber filter as analysis of carbon by thermal method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.187-188
• /
• 2011

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.57-60
• /
• 1999

순환유동층 보일러는 연소로 (상승관: riser)내에 공기를 고속으로 주입하여 비말동반되는 고체입자를 사이클론에서 포집 하여 재주입하는 유동층을 이르는 것으로, 난류유동층(turbulent fluidized bed), 고속유동층(fast fluidized bed) 그리고 희박상 유동(dilute phase flow) 영역에서 조업이 이루어진다. 순환유동층은 비교적 높은 기체 유속에서 조업이 이루어지기 때문에 고체입자의 혼합 및 비산 그리고 재순환이 격렬하게 이루어지고, 기-고체간 접촉효율 및 전열계수가 높아 전체적인 처리량 및 효율이 좋은 장점을 가지고 있다.(중략)

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.2 s.22
• /
• pp.255-260
• /
• 1987

The digital dust indicator (Sibata P-5), one of the direct·reading instruments was evaluated for the respirable dust in the underground coal mine environments. As a reference, respirable dust was determined using three cyclones and/or impactors. All the tests were performed on aerosol in twenty underground coal mines. The coefficients of mass-relative concentration were $0.067{\pm}0.054$ (Mean$\pm$Standard deviation) (range: 0.006-0.172). The relationship between relative concentration and temperature was not significant statistically. Also, the relationship of relative concentration and relative humidity was not significant. Mass concentration and relative concentration were $5.31{\pm}5.22mg/m^3$ and $162{\pm}163$ CPM ($Mean{\pm}Standard$ deviation) respectively. The range of mass concentration was $1.22-22.69mg/m^3$; relative concentration 16-628 CPM. The relationship of mass concentration and relative concentration was not significant in these ranges.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.3
• /
• pp.264-273
• /
• 2012

In this paper, two types of integrated gasification combined cycle (IGCC) plants using either an air separation unit (ASU) or an ion transport membrane (ITM), which provide the oxygen required in the gasification process, were simulated and their thermodynamic performance was compared. Also, the influence of adopting a pre-combustion $CO_2$ capture in the downstream of the gasification process on the performance of the two systems was examined. The system using the ITM exhibits greater net power output than the system using the ASU. However, its net plant efficiency is slightly lower because of the additional fuel consumption required to operate the ITM at an appropriate operating temperature. This efficiency comparison is based on the assumption of a moderately high purity (95%) of the oxygen generated from the ASU. However, if the oxygen purity of the ASU is to be comparable to that of the ITM, which is over 99%, the ASU based IGCC system would exhibit a lower net efficiency than the ITM based system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.23-35
• /
• 2003

"Backhole" is a new geometric parameter and is defined as an extra empty volume which is located behind the tangential entries at the rear part of the vortex chamber in the swirl injector. Backhole makes a difference to the spray characteristics of swirl injectors such as the spray angle, SMD, the mixing characteristics and so on. To find its characteristics, experiments are conducted by using a stroboscopic photography, a PDPA apparatus and a mechanical patternator. With the backhole, the mass flow rate of the swirl injector is increased and the center region of the injected flow has more large volume than that of without the backhole. Also the cone angle can be controlled by the backhole, so that the mixing efficiencies of swirl injectors are changed. Based on cold-flow tests, the swirl injector with the backhole may improve its performance.rformance.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.254-259
• /
• 2011

In electrospraying of polymer solutions, metal sample collectors are often ineffective in fully removing solvent from sprayed particles and recovering redispersable sprayed particles. Herein, a novel electro spraying system, where sprayed particles were dispersed into laminar flow of dispersant (coagulation liquid), was designed for the nano-encapsulation of protein drugs. Chitosan and polyacrylic acid were used as the encapsulation materials. Aggregation of particles could be prevented by using this new electrospraying system, and unimodal size distribution was observed at an applied voltage between 4~16 kV and a low flow rate. The effects of the applied voltage on mean particle size were not significant on the other hand.