• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.512-519
• /
• 2013

In this paper, we propose a novel unambiguous correlation function for composite binary offset carrier (CBOC) signal tracking. First, we observe that a sub-carrier of CBOC signal is seen as a sum of four partial sub-carriers, and generate four partial-correlations composing the CBOC autocorrelation. Then, we obtain an unambiguous correlation function with a sharp main-peak by re-combining the partial correlations. From numerical results, we confirm that the proposed unambiguous correlation function offers a better tracking performance than the conventional correlation functions in terms of the tracking error standard deviation and multipath error envelope.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.382-388
• /
• 2017

In this study, a basic study was carried out on the external strengthening method of public buildings. A steel damper is installed outside the specimen with a rocking wall and connected to the frame. Two specimens were fabricated, and the non-reinforced specimens utilized the existing results. As a result of evaluating the envelope curve, strength, stiffness and energy dissipation capacity, it was evaluated that the strength enhancement of the RW_P specimen externally reinforced plate damper was evaluated to be excellent. In addition, RW_S specimens with external S type damper shows a gentle envelop curve after maximum load, and it can be confirmed that the damper properly dissipates the seismic energy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.39-47
• /
• 2000

In this paper, we propose a new method of finding the true length of the line and long axis of the ellipse at the $\theta$=$\theta$o＋ 90$^{\circ}$ and short axis of the ellipse at the $\theta$ = $\theta$o from the Hough transform (HT) results. Through the simulations, we showed that the true length of the line and ellipse could be obtained with 98 % accuracy by using the distance from the maximum envelope to the minimum envelope. To compare the simulation results with the experimental results, we performed optical experiments by using a HT CGH filter. Through the experiments, we showed that our results were very similar to those of the simulation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.150-159
• /
• 2000

In-process diagnosis of the cutting state is essential for the automation of manufacturing systems. Especially when the cutting process becomes unstable it induces self-exited vibrations a frequent case of poor tool life rough surface finish damage to the workpiece and the machine tool itself and excessive down time. To ensure that the cutting process main-tains stable it is highly desirable to have the capability of real-time. To ensure that the cutting process main-tains stable it is highly desirable to have the capability of real-time monitoring and controlling chatter. This paper describes the detection method of chatter vibration using cutting force in turning process. In order to detect a chatter vibra-tion the dynamic fluctuation of radial force is analyzed since this components is sensitive to the chatter. The envelope sig-nal of radial force has been calculated by the use of FIR Hilbert transformer and it was useful to classify the chatter signal from the dynamically unstable circumstances. It was found that the mode and the mode width were closely correlated with the chatter amplitude was well. Finally back propagation(BP) neural network have been applied to the pattern recognition for the classification of chatter signal in various cutting conditions. The validity of this systed was confirmed by the experiments under the various cutting conditions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.6 s.46
• /
• pp.53-58
• /
• 2005

Semi-analytical methodology to examine the dynamic responses of a bridge is developed via the joint probability density function. The evolution of joint probability density function is evaluated by the semi-analytical procedure developed. The joint probability function of the bridge responses can be obtained by solving the path-integral solution of the Fokker-Planet equation corresponding to the stochastic differential equations of the system. The response characteristics are observed from the joint probability density function and the boundary of the envelope of the probability density function can provide the maxima ol the bridge responses.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.1-9
• /
• 2007

The method of generating the artificial acceleration time histories for seismic analysis based on genetic algorithms is presented. For applying to the genetic algorithms, the frequencies are selected as the decision variables eventually to be genes. An arithmetic average crossover operator and an arithmetic ratio mutation operator are suggested in this study. These operators as well as the typical simple crossover operator are utilized in generating the artificial acceleration time histories corresponding to the specified design response spectrum. Also these generated artificial time histories are checked whether their outward features are to be coincident with the recorded earthquake motion or not. The features include envelope shape, correlation condition between 2 horizontal components of motion, and the relationship of max. acceleration, max. velocity and max. displacement of ground.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.462-467
• /
• 2010

This paper uses MPI (Malmquist Production Index) method to provide basic information and policy direction derived to improve the productivity. This can identify whether or not the railroad service have excellent services, if there are structural problem, in which sector is experiencing a degree of productivity, in which sector should be set targets to some degree. According to the result, the productivity of Korea railway lines is measured 1.1 both publicity and profitability aspects. Changes in production technology were the most important causes. Strategic planning should consider to increase the productivity such as modernization of facilities and equipment, cost savings, and increase in productivity of employee and rail cars.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.15-23
• /
• 2007

This paper presents a shoreline change analysis on a reclaimed land, using a pair of aerial photographs taken before and after the reclamation. Shorelines that are defined by a tide datum, i.e. Approximately Highest High Water Level, were mapped by both analytical and digital photogrammetric methods. The past shorelines were overlapped with digital cadastral map from which areas of retracted and protruded lands were computed. Magnitude of shoreline changes was estimated by calculating areas between the past and present shorelines. Comparisons in terms of areas showed a fairly good agreement between the two methods. However, particularly in the estuary of complex morphology, shoreline mapping by digital photogrammetric method requires images to be scanned at a resolution higher than 1200 dpi.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.53
• /
• pp.315-336
• /
• 2012

In year 2011 export volume of South Korea surpassed 500billion USD and overall trade volume has exceeded one trillion USD. South Korea is ranked at 7th in the world by its export volume. Such an expansion of the trade volume leads to growth in customs clearance service demand. However, there are only handfuls of studies on the efficiency of customs clearance service which customs broker provide. If the efficiency in this study is not absolute, it shows relative efficiency to decision making unit. In this research survey was conducted targeting members of Korea Customs Brokers Association. Based on the survey improvement plans to enhance efficiency of customs clearances are as follows. First, rationalize the customs broker fee. Second, setup batch processing system to improve efficiency of the work process. Third, develop new area of task such as FTA and AEO certification. Forth, raise service quality by improving professionalism of customs brokers. Fifth, work efficiency of the office in the capital area will increase. Sixth, when inspecting import export cargo, customs broker should attend at the scene by their choice. Meanwhile, difference analysis on competent customs, type of office, and duration of the business was done but all the aspects were rejected. Such aspects does not influence on its effectiveness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.674-679
• /
• 2008

In this paper, we introduce a new design approach for self-sustained resonant accelerometer, that takes advantage of the automatic gain control (AGC) loop to achieve a stabilized oscillation dynamics. Fundamental idea of this accelerometer is to maintain uniform amplitude of oscillation under input accelerations. Through system modeling and loop transformation considering the envelope of oscillation, the controller is designed to maintain uniform amplitude in oscillation under dynamic input acceleration. The simulation results demonstrate the feasibility of the proposed accelerometer design, which is applicable to control grade inertial measurement system in industrial and civil application fields.