• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.56-56
• /
• 2022

지속시간 동안 물리적으로 발생 가능한 최대의 강수량으로 정의되는 PMP(Probable Maximum Precipitation)를 나타내는 한 가지 방법으로 포락곡선이 있다. 포락곡선은 최대강수량을 지속시간에 대해 도시한 것으로 역사적으로 발생한 극한 강수현상의 특징을 그대로 나타낸다. 오랜 기간 동안 강수 관측이 이루어졌다면 관측자료로부터 직접 포락곡선을 그릴 수 있겠으나, 지금까지 우리나라에서는 통계적 추정 방법을 통해 간접적으로 접근해왔다. 하지만, 강우관측자료가 상당히 누적된 지금에 이르러서는 직접 포락곡선을 도출하는 것이 가능해졌다. 이 연구에서는 50년 이상의 강우관측년도를 보유하고 있는 24개 종관기상관측 지점의 최대강우량을 종합하여 우리나라 기후조건을 대표할 수 있는 포락곡선을 산정하였다. 이번에 산정된 포락곡선을 우리나라 선행연구들에서 제시된 PMP와 비교하였으며, 전세계의 지속시간에 따른 최대강수량을 대표하는 Jennings law와도 비교하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.380-385
• /
• 1996

우리나라와 같이 강진의 발생이 거의 없는 지역에서, 가까운 장래에 예상되는 지진동 파형을 추정하는 기법으로서는 설계응답스펙트럼에 위상정보를 가미하는 모의지진동에 의한 작성방법을 흔히 사용하고 있으며, 이에 사용되는 위상스펙트럼의 특성을 랜덤으로 가정하는 경우가 대부분이다. 그러나 본 논문에서는 우리들이 일반적으로 랜덤으로 취급하는 위상스펙트럼에도 지진의 특성이 반영되어 있을 것이라는 가정하에 위상차분의 특성과 포락파형의 상관관계를 도출하고 위상차분을 고려한 모의지진동 작성방법을 제안하였다. 지진파형의 포락곡선을 확률분포로 사용하여 계산한 위상차분스펙트럼의 형상은 지진파형의 포락곡선과 거의 유사함을 확인하였고, 지금까지는 랜덤으로 취급한 위상스펙트럼에 물리적인 의미를 부여하는 계기가 되었다. 그러므로 앞으로 한반도에서 지진관측자료가 축적되어 한반도에서의 특징적인 위상차분스펙트럼이 정의된다면 우리나라의 지형조건이 고려된 진일보된 설계지진동을 작성할 수 있을 것이다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.39-49
• /
• 2003

This research is a part of a research program to develope a new design method for reinforced concrete bridge columns under axial load and cyclic lateral load. A nonlinear analytical method is proposed to obtain moment-curvature relationship and lateral load-displacement relationship. Various analytical models that contribute seismic behavior of reinforced concrete bridge columns are adopted and modified by comparing quasi-static test results of reinforced concrete columns with spirals of circular hoops. The analysis adopts confined concrete model, longitudinal reinforcement test result of reinforced concrete columns with spirals or circular hoops. The analysis adopts confined concrete model, etc. The results obtained using the propose analytical method agree well with test results and give conservative estimations particularly for deformation capacity and ductility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.282-286
• /
• 2004

본 연구에서는 수리, 수문학적 안전성을 평가한 댐들에 대하여 설계보고서, 정밀안전진단 등 준공 후 현재까지 시행된 용역결과들을 토대로 PMF 및 확률홍수량의 변화양상을 대상유역의 지역적 특수성, 대상 수문자료, 해석기법에 내하여 차이점을 각기 분석하고 이에 따른 결과를 비교${\cdot}$분석하였다. 대상댐의 설계홍수량 및 PMF에 대한 포락곡선을 도시하여 분석한 결과 Francou-Rodier 상수 K값 6.4를 4개댐의 PMF에서 초과하는 것으로 나타났다. 개선된 PMF 산정절차 기준에 따라 홍수량을 재산정하여 본 연구에서 분석한 내용과 비교 분석할 예정이며, 이러한 결과는 우리나라 기존 댐에 대한 수문학적 안전등급 설정에 중요한 정보를 제공할 수 있을 것이다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.161-167
• /
• 2001

It is difficult to obtain accurate fracture toughness values using three point bending test(TPB) proposed by RILEM committees because the shape of load-deflection curve is irregular and final crack propagation occurs after some slow stable cracking. However, fracture toughness is easily obtained from crack initiation load in the disk test. In this paper, the fracture properties of high strength concrete disks with center-crack was investigated. For this purpose, the experimental results were compared with the results by finite element analysis(FEA). And the experimental fracture locus was compared with theoretical fracture locus. Also, the results of fracture properties for the degree of concrete strength are presented. It is concluded from this study that results from FEA with maximum stress theory were compared well with the results from experiment. And the degree of concrete strength was contributed to the crack initiation load and fracture toughness, but was not contributed to the failure angle. Also, The discrepancy of fracture locus between the maximum stress theory and the experiment for concrete is considered to depend upon a large energy requirement for inducing the mixed-mode and sliding mode fractures.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.159-171
• /
• 1995

The parameters describing a complete hysteresis loop include pinch force, drift offset, effective stiffness, unloading and reloading trangential stiffness. Analytical equations proposed to quantify the nonlinear, inelastic behavior of reinforced shear walls can be used to predict these parameters as a function of axial load and drift ratio. For example, drift offset, effective stiffness, and first and second unloading and reloading tangential stiffness are calculated using equations obtained from test data for a desired drift ratio or ductility level. Pinch force can also be estimated for a given drift ratio and axial load. The effective virgin stiffness at the first yield and its post yield reduction can be estimated. The load deflection response of flexural reinforced concrete shear walls can now be estimated based on the effective wall stiffness that is a function of axial force and drift ratio.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.382-388
• /
• 2017

In this study, a basic study was carried out on the external strengthening method of public buildings. A steel damper is installed outside the specimen with a rocking wall and connected to the frame. Two specimens were fabricated, and the non-reinforced specimens utilized the existing results. As a result of evaluating the envelope curve, strength, stiffness and energy dissipation capacity, it was evaluated that the strength enhancement of the RW_P specimen externally reinforced plate damper was evaluated to be excellent. In addition, RW_S specimens with external S type damper shows a gentle envelop curve after maximum load, and it can be confirmed that the damper properly dissipates the seismic energy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.39-47
• /
• 1990

The generation of artificial accelerograms considering the characteristic of earthquakes in the Korean peninsula for a time history analysis of structures is accomplised by the stochastic method. The engineering data such as a representative shape of envelope function and an effective duration are investigated from the instrumental records. The maximum ground acceleration value is based on seismic zoning map which are constructed for the Korean peninsula. The acceleration-time histories are generated for two different types of earthquake motions and two types of soil conditions. In the study, the maximum ground acceleration value of 0.2 g and effective durations of 24 seconds are used. The validity of the artificial accelerograms is obtained by the comparison with the required envelope functions and the design response spectrum.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1992

A simple formula of the envelope method, which uses two envelopes fitted to the transmittance at quarter- and half-wave optical thicknesses, is derived to determine the optical constants (refractive index and extinction coefficient) and the thickness of weakly absorbing thin films. We applied the envelope method to ZnS and SiOx films deposited in a vacuum chamber and determined the optical constants at different deposition conditions. For SiOx films, the decrease in refractive index is consistent with the increase in stoichiometry as the backfilled oxygen pressure increases.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.715-725
• /
• 2003

This paper is a part of a research program to develop a new design method for reinforced concrete bridge columns under seismic loading. The objectives of this paper are to investigate the relationship between ductility and confinement steel amount and to propose a design equation for reinforced concrete bridge columns. Computer program NARCC was used for parametric study, which was proved to provide good and conservative analytical result especially for deformation capacity and ductility factor compared with test result. A total of 7,200 reinforced concrete columns confined with spirals or perfect circular hoops were selected by combination of variables such as section diameter, aspect ratio, concrete compressive strength, yielding strength of longitudinal and confinement steel, longitudinal steel ratio, axial load ratio, and confinement steel ratio. Based on the parametric study a new design equation for confinement steel amount considering ductility demand was proposed, which can be used in the new seismic design method, i.e. ductility-based seismic design, for RC bridge columns.