• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.127-127
• /
• 2017

침수식생이 식재된 개수로에서 식생밀도에 따라 유동 및 난류의 특성이 변화된다. 이러한 특성은 식생에서의 유사, 영양물질, 용존 산소 등에 영향을 미치며 수중 생물의 서식에 변화를 준다. 따라서 침수식생이 식재된 개수로 흐름을 이해하는 것은 중요하게 여겨지고 있으며 많은 선행연구자들에 의해 실험 및 수치모의를 통해 활발히 연구되고 있다. 하지만 대부분의 RANS(Reynolds-Averaged Navier-Stokes)를 기반으로 한 선행연구에서는 침수식생의 흐름 특성을 반영하지 않은 모형을 이용하여 정확한 모의 결과를 도출하지 못 하였다. 이에 정확한 침수식생 흐름을 수치모의하기 위해서는 침수식생 흐름의 특성을 반영한 지배방정식을 이용해야 한다. 본 연구의 목적은 침수식생 흐름의 특성을 RANS 모형 중의 하나인 SA (Spalart-Allmaras) model에 반영하고, 식생밀도에 따른 유동 및 난류량을 실측치와 비교하는 것이다. RANS 방정식을 이용하여 난류모델링을 하였으며, 난류폐합문제를 해결하기 위해서 modified SA model을 이용하였다. 침수식생에서의 흐름을 해석하기 위해 운동량방정식에 식생항력을 추가하였다. 선행연구자의 식생수로 실험을 바탕으로 모형검증을 하였으며, 식생밀도에 따라 평균유속 및 난류구조를 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.4
• /
• pp.29-39
• /
• 2016

This paper presents the results of 2D and 3D finite element simulations conducted to analyze the effects of excavation depth (H), excavation width (L), and ground condition on the behavior of anchored earth retaining wall in inclined ground layers. The results of numerical analyses are compared with those of the site instrumentation analyses. Based on the results obtained, it appeared that 2D numerical analysis tends to overestimate the horizontal displacement of retaining wall compared to the 3D numerical analysis. When the excavation depth is deeper than 20m, it is found that 2D and 3D numerical analysis results of excavation work in soil ground condition are more different from the results in rock ground condition. For an accurate 3D numerical analysis, applying 3D mesh which has an excavation width twice longer than excavation depth is recommended. Consequently, 3D numerical analysis may be able to offer significantly better predictions of movement than 2D analysis.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.427-435
• /
• 2008

In this paper, review was made for the excavation method and optimum bench length for unstable tunnel face in case of rock classification type V in order to make the best use of in-situ bearing capacity. 3D FEM analyses were performed to investigate the influences on the tunnel face and adjacent area with regard to the pattern and number of bolts when face bolts were used as a supplementary measure. As a result of this study, full section excavation method with sub-bench is effective in reducing the displacement greatly due to early section closure. Displacement-resistant effects in accordance with the bolting patterns are grid type, zig-zag type and then circular type in order of their effect. And horizontal extrusion displacement of tunnel face reduces as the number of bolts increase. A grid type face bolt covering $1.5m^2$ of tunnel face could secure the face stability in case of full section excavation method with sub-bench.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.55-77
• /
• 2012

A Modern Rock TBM is a tunnel excavation method combining the conventional tunnelling method with the mechanized tunnelling method. It is a hybrid system that excavates a tunnel with TBM and supports the ground by ring beam, wire mesh, rock bolt, shotcrete, i.e., conventional tunnelling method. In the Modern Rock TBM, a ring beam is similar to a steel rib in NATM in the way that uses H-beam. But using a ring beam is more effective than a steel rib because it is installed in a closed-circle. Therefore, improving the performance of the ring beam is a key factor for achieving tunnel stability. In this respect, this study introduces a pressurized ring beam that might be functioning more effectively by confining convergence during tunnel excavation. In order to verify the effect of the pressurized ring beam, a three-dimensional numerical analysis was conducted. The numerical analysis confirms an increase in the minimum principal stress and reduction in the plastic strain that triggers excessive displacement. The analysis result also indicates a decrease in the relative displacement occurring after installing the ring beam, and expansion in spacing between the ring beams.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.138-138
• /
• 2011

식생된 개수로에서 식생의 영향을 파악하기 위해 k-$\in$ 난류 모형을 이용하여 수치모의를 하였다. 식생의 영향을 고려하기 위해 항력항을 추가한 지배방정식을 구성하였으며, 지배방정식을 해석하기 위하여 유한체적법을 사용하였다. 수치모의에서 구한 식생된 개수로의 흐름구조를 기존의 수리실험 결과와 비교하여 비교적 잘 일치함을 확인할 수 있다. 난류의 생성과 소멸을 수치모의한 결과, 부분구간 식생된 경우 식생높이 보다 낮은 구간에서는 후류에 의한 난류 생성이 지배적이며, 식생높이보다 높은 구간에서는 주로 마찰에 의한 난류 생성이 지배적임을 보였다. 기존의 연구들은 식생의 영향을 고려하여 개수로의 흐름을 연구한 예는 드물며, 현재까지 진행되어진 국내의 연구는 난류모형을 이용하여 식생된 개수로에서의 흐름 구조를 모의하였다. 따라서 난류흐름을 모의하는데 가장 보편적인 k-$\in$ 난류모형을 이용하여 식생된 개수로에서 수직방향으로의 흐름구조와 식생의 영향을 해석하는 것은 그 자체로도 의미 있는 연구이며, 앞으로의 환경수리 문제를 해결하기 위해 선행되어야 하는 연구이다. 식생된 개수로에서의 난류구조와 부유사 이동에 대한 식생의 영향을 비정상 1차원 수직모형으로 해석하였으며, 폐합문제를 위해 2-방정식인 k-$\in$ 난류모형을 사용하였다. k-$\in$ 난류모형에 식생에 의한 항력항을 더하여 지배방정식을 구성하였다. 수직방향에 대해 흐름방향 유속 u, 난류에너지 k, 그리고 난류에너지 소산율 $\in$의 분포를 구하고, 부유사에 대한 수송방정식을 풀었다. 식생된 개수로와 식생되지 않은 개수로에서의 유속분포, 난류강도, 레이놀즈 응력 분포와 난류의 생성과 소멸을 구하여 식생이 난류흐름에 미치는 영향을 분석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2021

In this paper, the effect on the lateral and torsional behavior of ballastless railway plate girder bridge by the installation of the lower horizontal bracing has been reviewed. First of all, the most efficient lower bracing arrangement has been reviewed by comparing and examining the lateral displacement due to the train load, targeting analysis models with different arrangement types of lower bracing. Next, the research on torsional behavior of plate girder bridge with lower bracing has been conducted. In addition, the torsion constant from FEM analysis results has been compared with the torsion constant of a railroad plate girder bridge with a closed section by substituting the upper and lower horizontal bracing with equivalent thickness. Based on this comparison, the impact on the bridge span length and the cross section area of the lower bracing has been examined. Through this study, the curve graph related to lateral buckling moment and torsional constant ratio is presented and the range of plate girder bridge requiring torsional reinforcement is proposed.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.671-680
• /
• 2007

In this study, we performed a loading test to evaluate the effect of load distribution on continuous two-span plate-girder bridges with or without bottom lateral bracing using one-fifth-scale bridge specimens. From the test results, when specimens with lateral bracing were loaded eccentrically, the load distribution capacity of the concrete deck and cross beam improved and greater loading was distributed to the other side of the girder subjected to loading. The load distribution rate of the specimens with and without lateral bracing system was evaluated from the analytical model that was verified by the test results. From the result of the quantitative evaluation, when specimen without lateral bracing was loaded eccentrically, mostly 21% of loading according to the concrete deck was distributed to the other side of the girder subjected to loading. However, when specimen with lateral bracing was loaded eccentrically, the load distribution rate increased by 1.7 times as all cross beams, bracing and concrete deck participated in load distribution. The reason is that the torsional rigidity increased as the model with lateral bracing behaved like a pseudo-closed box section.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.133-138
• /
• 1987

The precise methods applied to adjust plane trilateration nets employ least squares techniques. The observations or the condition equations in these known methods are, without exception, nonlinear. The coefficients of the corrections in the conditions equations methods are lengthy and complicated. This paper presents a new method in which the coefficiets of the corrections of the conditions are simple and can be easily calculated and checked. In this method the measured distances in trilateration nets are considered as elastic members in an internally redundant framework. If the redundant members have measuring errors, axial forces must be applied to fit them in the framework. As a result axial forces will develop in all other members causing changes in their lengths. By applying minimum work techniques one can determine these changes in length which are in fact the required corrections of the measured distances. The result of this study presents that the closing ratio is about 1/145000 and it is improved that this method is useful in analysis plane trilateration nets.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.665-675
• /
• 2002

It is very closely related with the reliability of the pipe network to predict pipe burst and diminish burst effect in water distribution system. Most of the engineers have not consider pipe layout and the effect of pipe burst in conservative pipe network design. In this study, The effect of pipe burst in the network is analyzed with respect to pipe network geometric topology and the method of increasing the system reliability is presented by reducing pipe-burst effect. In existing pipe system, it is only designed to the closed loop system but in case of each pipe burst, it cannot transmit appropriate water to consumers and occurs severe hydraulic head drop in many nodes. The techniques developed in this study allow proper pipe diameter and pipe layout to pipe system through the analysis of pipe-burst effect. Thus, when each pipe is bursted, pipe system is prevented from severe pressure head drop in demand nodes and can supply stable flowrate to consumer.

• Geotechnical Engineering
• /
• v.1 no.2
• /
• pp.41-54
• /
• 1985

Generally, ground settlements and lateral displacements are accompanied by underground excavation associated with open-cut or tunnling. These ground movements cause a harmful influence upon nearby super.structures and sub-structures. Occasionally, the ground movements may pose serious problems as the function of the nearby structures may be disrupted. Therefore, prior to the subway construction in an urban area, it is necessary to identify the causes of ground settlements and estimating the extent St the magnitude of ground movements since any potential damage to the nearby structures such as gas lines, water mains, high buildings and cultural assets must be assessed. The research was performed mainly on ground movements such as surface settlements, lateral displacements, subsurface settlements and crown settlements to predict the maximum settlement and settlement zone, and to identify the causes of ground settlements in NATM sections of Busan subway. As a result, it was found that lateral distribution of settlements could be approximated reasonably by a Gaussian normal probability curve and longitudinal distribution of settlements by a cumulative Gaussian probability curve, and that the early closure of temporary invert was very important to minimize ground settlements.