• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.170-178
• /
• 2004

This paper deals with six degree-of-freedom HILS(hardware-in-the-loop-simulation) of KSR-III rocket using a TAFMS(three axis flight motion simulator). This TAFMS HILS test is accomplished before main HILS tests in order to verify the control stability in the presence of TAFMS dynamic effects. The TAFMS HILS test includes initial attitude holding tests for INS initial alignment procedures, timer synchronization tests with an auxiliary lift-off signal, real-time calibration tests using an external thermal recorder, open-loop TAFMS operating tests, and final closed-loop TAFMS HILS tests using the TAFMS attitude measurements as inputs to the closed control loop. The HILS tests are accomplished for several flight conditions composed with nominal flight condition, TWD effect added condition, slosh modes and/or bending modes existing condition, and windy condition, etc.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.370-373
• /
• 2010

본 논문에서는 유도전동기와 제어기의 폐루프 극점을 원하는 위치에 배치하여 유도전동기를 위한 PID제어 동조파라미터를 얻어 유도전동기를 제어하는 방법을 제안한다. 이러한 설계방법은, 설계요건뿐만 아니라 제어기 고유의 안정도와 강인성까지 제공하므로 매우 유용하다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1741_1742
• /
• 2009

본 논문은 측정 실패가 존재하는 비선형 시스템에 대한 동적 출력 궤환 퍼지 제어기의 설계에 대해 연구한다. 비선형 시스템을 Takagi-Sugeno (T-S) 퍼지 모델 기법을 이용하여 퍼지 시스템으로 모델링하고, 이를 바탕으로 동적 출력 궤환 퍼지 제어기를 설계한다. 폐루프 시스템의 안정도 조건을 선형 행렬 부등식 (LMI)로 나타낸다. 그리고 모의실험을 통해 제안된 제어기의 성능을 파악한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.284-289
• /
• 2003

The electric furnace, inside which the desired temperature is kept by the generated heat, is known to be a difficult system to control and model exactly because system parameters and response delayed time are varied as the temperature and positions are changed. In this study, the GPCEW (generalized predictive control with exponential weight), which always guarantees the stability of the closed loop system and can be effectively applied to the internally unstable system, was introduced to the ceramic drying electric furnace and was verified by showing its temperature tracking performance experimentally.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.289-294
• /
• 1998

본 논문에서는 상태행렬과 입력행렬에 시변 불확실성이 있는 선형시스템에 대한 강인 추적 제어기를 제안한다. 본 논문에서 대상으로 하는 불확실성은 block-diagonally structured uncertainty와 norm bounded uncertainty인데 모두 정합 조건을 만족시킬 필요는 없다. 폐루프 시스템이 불확실성하에서 안정할 수 있는 조건을 제시하고 이 조건이 선형행렬 부등식으로 나타낼 수 있음을 보인다. 추적 오차를 줄이고 오차 감소 비율을 증가시킬 수 있는 최적화 방법도 제아한다. 또한 불확실성의 크기가 0으로 줄어들면 추적 오차도 0으로 줄어듬을 보인다.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.87-96
• /
• 2009

The purpose of this paper is to analyze the power control problem in wireless communications with game theoretic approach. The major contribution of the present paper is that we formulated the problem as a game with a finite number of strategies while most of the previous game theoretic power control literatures modeled with continuous game in which there are infinite number of strategies. It should be noted that the closed-loop power control would be performed in a discrete manner, power up or down from the present level of power with fixed power control step size. We model the current closed-loop power control scheme with the famous Prisoner's dilemma model and show that the power-up strategy is Nash equilibrium. That is, every mobile tries to increase their power and approach to their maximal power. Thus, the outcome of current power control (Nash equilibrium) is inefficient. In order to attain efficient power control for the environment where ICI(Inter-Cell Interference is severe, we developed a new payoff function in which the penalty mechanism is introduced and derived conditions under which power-down becomes Nash equilibrium strategy for all players. Furthermore we examined the trajectory of equilibrium power when the power control game will be played repeatedly.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.45-52
• /
• 2019

This paper proposes the design of a closed-loop stepping motor drive for real-time Ethernet (RTE), which can be easily applied to a variety of RTE protocols. The proposed design is divided into a closed-loop step motor drive which can be reused for various types of RTE protocol and RTE module developed for each specific RTE protocol. It is based on a layered architecture so that the motion control algorithm can be easily reused independently of the RTE protocol and motion profile. To verify the proposed design, closed-loop motor drives based on EtherCAT and Mechatrolink III were developed and their performances were evaluated. Cycle time was measured to verify the real-time communication performance of the developed EtherCAT and Mechatrolink III based motor drive. As a result, the EtherCAT was 7.5 times faster than the Mechatrolink III when 32 motor drives were connected.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.231-239
• /
• 1998

This paper presents the dynamic analysis and control loop design of a zero voltage switching full bridge (ZVS-FB) PWM DC/DC converter. The small-signal model is derived incorporating the effects of phase shift control and the utilization of transformer leakage inductance and power FET junction capacitance to achieve zero voltage resonant switching. These effects are modeled by introducing additional feedforward and feedback terms for duty cycle modulation. Based on the results of the small-signal analysis, the control loop is designed using a simple two-pole one-zero compensation circuit. To show the validity of the design procedures, the small signal analysis of the closed loop system is carried out and the potential of the zero voltage switching and the superiority of the dynamic characteristics are verified through the experiment with a 2 kW prototype converter.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.911-917
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network to real-time distributed control system is gaining acceptance in many industries. In order to take advantages of networking, however, the network should be carefully designed to satisfy real-time distributed control. This paper presents an implementation method of closed-loop control using Profibus-FMS. In order to implement a closed-loop control system, we used industrial computers with Profibus-FMS network cards and a DC servo motor. Through various experiments, the step response of the control system with network was compared with the reference response without network.