• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.76-82
• /
• 2004

A method of designing a state feedback gam achieving a specified insensitivity of the closed-loop trajectory by the singularly perturbed unified system using the operators is proposed. The order of system is reduced by the singular perturbation technique by ignoring the fast mode in it. The proposed method takes care of the actual trajectory variations over the range of the singular perturbation parameter. Necessary conditions for optimality are also derived. The previous study was done in the continuous time system The present paper extends the previous study to the discrete system and the ${\delta}-operating$ system that unifies the continuous and discrete systems. Advantages of the proposed method are shown in the numerical example.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.3
• /
• pp.324-329
• /
• 2005

In this paper, a robust $H\infty$ stabilization problem to a uncertain discrete-time nonlinear systems with time-delay via fuzzy static output feedback is investigated. The Takagj-Sugeno (T-S) fuzzy model is employed to represent an uncertain nonlinear system with time-delayed state. Then, the parallel distributed compensation technique is used for designing of the robust fuzzy controller. Using a single Lyapunov function, the globally asymptotic stability and disturbance attenuation of the closed-loop fuzzy control system are discussed. Sufficient conditions for the existence of robust $H\infty$ controllers are given in terms of linear matrix inequalities via similarity transform and congruence transform technique. We have shown the effectiveness and feasibility of the proposed method through the simulation.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.106-119
• /
• 2020

In this paper, we propose a control scheme for quadrotor system using a pole placement method. When using a state feedback controller, a lot of trial and error in selection of control gains are often required to improve system performance. In order to relax this complicated process, we analyze the closed-loop system associated with control gains. Then, we present a control gain selection algorithm for control gains using a pole placement method to improve the system performance. The proposed control method is applied to the actual quadrotor system to illustrate the validity of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.134-140
• /
• 1998

포항제철 2열연공장의 사상압연에 사용되고 있는 DC 모터를 가지는 열간압연 구동기에 대한 견실 H/sup .inf./ 속도제어기 설계방법을 제안한다. 기존에는 PI 재어기법을 이용하여 속도를 제어하고 있으므로 불확실성과 외란등이 존재할 경우 양호한 제어 성능을 얻기 힘들다. 이를 해결하기 위해 주파수 하중 함수를 가지는 혼합감도최소화 문제를 설정하여 견실성을 보장하는 H/sup .inf./ 속도제어기를 설계한다. 이때 주파수 하중함수는 루프쉐이핑기법을 이용하여 주어진 구동기 플랜트에 적합하도록 선택한다. H/sup .inf./ 속도제어기 설계는 Pasek이 제시한 DC 모터의 모델링 방법에 의해 얻어진 모델을 포함하는 구동기 모델에서 속도제어기 부분을 제외한 모델을 대상으로 한다. 제안한 견실 속도제어기 설계방법은 파라미터 변화나 부하토크 변동 등의 외란에 대하여 폐루프 시스템의 견실안정성과 원하는 속도에 좋은 추적 성능을 보인다. 제어 대상인 포항제철 2열연공장의 열간압연 구동기에 대한 시뮬레이션을 통해 기준속도 추적성, 응답속도, 불확실성과 외란에 대한 견실성 등의 성능에 기존의 PI 속도제어기보다 양호함을 확인함으로써 제안한 견실 H/sup .inf./ 속도제어기 설계 방법의 타당성을 보인다.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.19-27
• /
• 2004

A delay dependent fuzzy $H_2/H_{\infty}$ controller design method for delayed fuzzy dynamic systems is considered. Using delay-dependent Lyapunov function, the asymptotical stability and $H_2/H_{\infty}$ performance problem are discussed. A sufficient condition for the existence of fuzzy controller is presented in terms of linear matrix inequalities(LMIs). A simulation example is given to illustrate the design procedures and performances of the proposed methods.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.9-16
• /
• 2004

In this paper, we propose a robust controller for robot manipulators with parametric uncertainties using feature-based visual servo control system. In order to improve trajectory error of the robot manipulators due to the parameter variation, integral action is included in the dynamic control of part in inner subroutine of the control system. This integral action also reduces feature error in the steady state. The stability analysis of the closed-loop system is shown by the Lyapunov method. The effectiveness of the proposed method is shown by simulation and experimental results on the 5 link robot manipulator with two degree of freedom.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.9-17
• /
• 2004

In this paper, we examine the MIMO(Multiple Input Multiple Output) system in the point of mobile communication that is used for railway environment. First, under the radio environment, wireless channel characteristics are analyzed between moving train and base station, both assuming track side base stations and non-track side base stations. Next, the paper introduces the MIMO system which can be used to solve the problem of performance degradation in railway environment, and analyzes its performance in terms of channel capacity and diversity. We especially compares open-loop scheme with closed loop scheme at the diversity and analyses their performance according to antenna correlation. Finally, the we presents experimental result from the ESCORT project that was studied in railway environment with the MIMO system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.1-7
• /
• 2004

The effect of the sub-optimal beam-forming and the fading channel correlation on the closed loop transmit antenna diversity(CTD) system is investigated in frequency flat Rayleigh fading channels. The fast channel fading prevents the perfect channel estimation at a mobile station, hence the imperfect weight is applied to the antenna branch of transmitter. The weight causes sub-optimalbeam-forming and aggravates the performance of CTD system. The fading correlation or a wireless channel also is one of the factors decreasing the diversity gain. A bit error rate expression for the CTD system is analytically derived as a function of the channel estimation error, the channel correlation coefficient the feedback delay, and fading index. It is shown that the channel estimation error gives more severe effect to the system performance than the channel correlation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.79-90
• /
• 2004

Systematical robust stability analysis and design scheme for the feedback linearization control systems via fuzzy modeling are proposed. It is considered that uncertainty and disturbances are included in the Takagi-Sugeno fuzzy models representing the nonlinear plants. Robust stability of the closed system is analyzed by casting the systems into the diagonal norm bounded linear differential inclusions and by converting the analysis and design problems into the linear matrix inequality optimization, a numerical method for finding the maximum stable ranges of the fuzzy feedback linearization control gains is also proposed. To verify the effectiveness of the proposed scheme, the robust stability analysis and control design examples are given.