• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 1986

The swelling and hydration properties of Korean red ginseng tails and yield of total solids in extract were studied during extraction with ethanol solution having a concentration of 0-90% at $60-100^{\circ}C$. Extraction was carried out 5 times which was taken 8 hours per each time of extraction. The swelling, hydration and total solids yield were increased as the ethanol concentration decreased and as the extraction temperature raised. The cumulative value of solids yield suggested that three times of extractions with water or 70% ethanol were effective to recover more than 84%. Linear regression analysis on the properties investigated and extraction conditions showed a linear logarithmic relationship .

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.436-439
• /
• 2012

본 연구는 오존수 제조장치에 인젝터를 이용한 오존 주입방식을 도입하여 소형화, 저전력화를 실현하고자 하였다. 오존발생기, 물-오존 혼합기(인젝터), 오존용해조, 배오존 처리기로 구성된 시스템을 제작하여 인젝터 주입방식에 의한 오존수 제조장치의 오존 용해특성과 그 적용성을 검토하였다. 오존 용해 특성으로 물-공기량에 따른 인젝터 성능, 용해조에서의 오존 용해능 등을 검토하였다. 인젝터 방식은 기존의 가압용해방식에 비하여 저농도 용해능을 보였으나, 인젝터 내부의 물-오존 접촉효율이 높아 평형농도에 도달되는 시간이 단축됨을 확인하였다. 제조된 오존수의 적용 효용성은 용존오존의 잔류시간과 미생물 살균능 검사를 통하여 실시하였다. 횡형식 인젝터 시스템에 의해 용해된 용존오존의 잔류시간이 기존의 가압용해방식에 비하여 다소 짧았으나 미생물의 살균능에는 크게 차이가 나지 않았다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.461-473
• /
• 2000

This paper deals with a numerical model for the time-dependent analysis of steel and concrete composite beams with partial shear connection. A linear partial interaction theory is adopted in formulation of structural slip behavior, and the effect of concrete creep and shrinkage are considered. The proposed model is effective in simulating the slip behavior, combined with concrete creep and shrinkage, of multi-span continuous composite beams. Finally, correlation studies and several parameter studies are conducted with the objective to establish the validity of the proposed model.

• Nuclear Engineering and Technology
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1984

General time-volume averaged conservation equations and jump conditions for two-phase flows are derived here. The time-averaged equations for a single phase region in two-phase flow are obtained from local instant balance equations by a technique often used for single phase turbulent flow equations. The results obtained by integrating the time averaged equations over a flow volume are spatially averaged twice; first, they are averaged over a single phase region of the k-th phase and then averaged over the total volume of the k-th phase, in a flow volume. The mass, momentum, and energy conservation equations are obtained from the general time-volume averaged equations. The advantages of the present model are explained by comparing it with Ishii's model (1) and Banerjee's model (2). Finally, the assumptions and approximate terms of the equations of the THERMIT-6S are clarified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.332-338
• /
• 2007

In this paper, the three modified space vector modulation methods are suggested in order to control effectively the shoot-through time at Z-source inverter. Both the switching patterns of three modulation methods and the modulation signals with a variation of shoot-through time are analyzed. The optimum modified space vector modulation method is determined by both the control range of the shoot-through time and the symmetry of the switching pattern and modulation signal. The performances of modulation methods are verified with the simulation results with 32-bit DSP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.63-63
• /
• 2023

하천수위는 상류에 위치한 유역의 유출상황에 따라서 지속적으로 변화하게 되며, 특히 홍수시에 급격하게 상승하고 홍수피해를 야기하게 된다. 이 때문에 하천의 수위변화를 모의·예측하기 위한 많은 이론이 제안되고 적용되어 왔으며, 일반적으로 강수와 유역특성을 시공간적으로 고려할 수 있는 수리·수문모형을 이용하여 모의되어 왔으나 숙련된 전문가가 필요하다는 단점이 있다. 이에 본 연구의 목적은 각종 수방활동에 종사하는 관련자가 특정 지점의 홍수시 수위상승 특성을 간편하게 확인하고 활용할 수 있는 방법론을 제시하는 데 있다. 이를 위하여 한강수계에 위치한 홍수취약지구에 홍수정보를 제공하는 45개 수위관측소의 2010년부터 2022년 사이의 10분 단위 수위자료를 수집 하였으며, 각 지점별로 수위자료에 홍수 사상에서 발생하는 시간적인 상승량을 단위시간을 통하여 수위 상승값을 분위화하는 수위상승거동곡선(Water-level Rising Behavior Curve) 개념을 적용하여 분석하였다. 적용결과에 따라, 일반적인 유역은 유역특성에 따라서 홍수위가 상승하다가 일정시간이 경과한 후에 평형상태에 도달하는 것으로 나타났으며, 이러한 특성을 현장 종사자가 정량적으로 판단하기 위한 보조자료 및 각종 수방계획 수립을 위한 기초자료로서 활용할 수 있는 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.268-275
• /
• 2004

Effects of soaking time and particle size on physicochemical properties of nonwaxy rice flour were investigated. Nonwaxy rice grains were soaked at $4^{\circ}C$ for 0, 1, 12, and 24 hr, dried at room temperature, and milled, Resulting flours were passed through 45-mesh ($<355{\mu}m,\;IL45$) and 100-mesh ($<150{\mu}m\;IL100$) sieves and separated into $<40{\mu}m\;and\;40-100{\mu}m$ series. IL45 series showed higher amount of large particles ($40-100{\mu}m$) than IL100 series. As the soaking time increased, protein and ash contents decreased, and amylose content, water-binding capacity, swelling power, and solubity of nonwaxy rice flours increased. Swelling power and solibility of nonwaxy rice flours also increased between $65-85^{\circ}C$. Water-binding capacity, swelling power, and solubility of IL100 series were higher than those of IL45 series. 12 hr-soaked nonwaxy rice flour pastes showed higher peak viscosity and breakdown but lower setback and visicosity at $95\;and\;50^{\circ}C$ than 1 hr-soaked ones. X-Ray diffractograms of nonwaxy rice flours were not affected, whereas surface appearance was affected, by soaking time and particle size.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.85-97
• /
• 2001

A mathematical model was proposed to analyze the damped motion of contact lens which is initially displaced from the equilibrium position. The model incorporates the differential equations and their numerical solution program, based on the formulations of restoring force arising from the capillary action in the tear-film layer between the lens and cornea. The model predicts the capillary action induced surface tension, time dependence of displacement of lens when it is released from the equilibrium position. It seems that the motion of lens is similar to the typical over-damped oscillation caused by the large viscous friction in the liquid layer between the cornea and lens. The effect of variables such as base curves, lens diameters and thickness of tear film layer were illustrated by the computer simulation of the derived program. The time required for the lens to return to the original position increases as the liquid layer thickness increases and it decreases as the diameter of lens increases. With the certain value of base curve the time interval is found to be minimum. The free vibrations of lenses were also simulated varying the parameters such as base curve, diameter, layer thickness. The resonant frequencies are inversely proportional to the liquid layer thickness and it increases as the lens diameter increases. The resonant frequency of lens has a maximum when the diameter is of certain value. If the external impulse or force of the same frequency as the natural frequency of contact lens acted on the cornea in vivo it may cause an excessive movement and thus it might cause the distortion 10 the lens or be pulled off the eye.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.344-350
• /
• 2006

Soaking and drying were studied for seven grains and legumes including glutinous rice, brown rice, glutinous brown rice, glutinous barley, Seoritae, Heuktae and red bean to improve taste of cooked mixed grams and make easy to cook then Seoritae and Heuktae showed the highest water absorption and the rest were in the order of glutinous barley, glutinous rice, milled rice, brown glutinous rice, brown rice, and red bean. In regards with water absorption index by soaking temperature, the higher the temperature showed, the more water absorption and the shorter time to reach the water absorption balance, the more grinding legumes. showed the more water absorption and the shorter time to reach to the water absorption balance. The soaked samples were dried at mom temperature $30^{\circ}\C,\;50^{\circ}\C$, and microwave 300 W, 700 W and 1000 W power. As a result 700 W drying method br microwave can dry samples in the shortest time without damage to the samples. Therefore, it was considered as the best pretreatment conditions for mixed stains to dry with 700 W microwave after one-hour soaking at $30^{\circ}C$.