• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1926-1930
• /
• 2010

표면영상유속계(SIV, Surface Image Velcimetry)는 수표면의 영상분석을 통해 유속을 측정하는 도구이다. SIV는 하천의 유속을 매우 간편하게 측정할 수 있기 때문에, 야외 실험이나 하천의 유속 측정에 매우 유용한 장비이다. 그러나, SIV를 이용하여 유량을 산정하고자 할 경우, 하천 표면의 평면 측량 자료와 하천의 단면 측량 자료가 반드시 필요하다. 그러나, 측량 작업 특히 강우 중의 측량 작업은 매우 번거롭기 때문에, SIV의 간편성과 유용성에도 불구하고, 이용자들로 하여금 SIV를 쉽게 이용하기 어렵다는 그릇된 인식을 줄 수 있다. 만일 번거로운 측량을 거치지 않고도 효율적이고 간편하게 하천의 평면을 추정할 수 있다면, SIV를 마치 일반적인 프로펠러 유속계처럼 쉽게 이용할 수 있을 것이며, 그 적용성도 크게 증진될 것이다. 본 연구는 카메라 영상 모형을 유도하는 것이다. 이 카메라 모형을 이용하여 번거로운 측량 작업이 없이 평면의 좌표점을 추정할 수 있게 되며, 유속장 측정을 자동화할 수 있을 것이다. 이를 위하여 평면 좌표와 참조점을 관련짓는 사영 변환과 회전 변환 등 사진 측정 기법을 도입하였다.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.3
• /
• pp.28-33
• /
• 2004

본 논문에서는 자유곡면 간의 교차곡선이 갖는 위상 구조를 분석하는 방법을 제시하며, 또한 이를 이용하여 교차곡선을 효율적이고 안정적으로 계산하는 알고리즘을 제안한다. 자유곡면 간의 교차곡선 계산은 현재까지 난문제로 알려져 있으며, 그러한 가장 큰 원인 중의 하나로서 교차곡선의 위상 구조를 분석하기 어렵다는 점을 들 수 있다. 본 논문에서는 입력으로 주어지는 자유곡면 중의 하나가 매개변수 곡면 F(u, v) 이라는 가정 하에 음함수 곡면 g(x, y, z) = 0 과의 교차곡선, 그리고 또 다른 매개변수 곡면 G(s, t)와의 교차곡선 계산방법을 제시한다. 교차곡선은 uv-평면 상의 평면 곡선으로 고려되며, 이 평면곡선에서 u-방향에 대한 극점(critical point)을 먼저 계산한 뒤 이를 이용하여 위상구조를 분석한다. 또한, 분석된 위상구조를 기반으로 전체 교차곡선을 추적(tracing)하는 알고리즘을 제시한다.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.23-32
• /
• 2007

This study was to find out contemporary planning characteristics of rural houses in Na-po Munhwa village by analyzing their floor plans. These results were then compared with apartment housing trends. 240 houses were built in that village, but it was only possible to collect housing data, floor plans and general building records from 102 houses, using house registers. By analyzing those data, the findings were as follows: 1) Floor plan shapes of rural houses showed a tendency to words a 'ㅋ' shape, a 3bay or a transformed 3 bay and a "room-living-room" space arrangement of a centered living room. Public spaces (L.D.K) were separately planned DK from livingroom. Living space was very open and the DK space had created visual privacy from the entrance. The Anbang (master bedroom) and living space were set to the front of the floor plan and an interior toilet was planned in them. These floor-planning tendencies were similar to trend apartment houses in urban areas. 2) Utility and Balcony spaces as a support space of kitchen were not popular features of rural houses in the Munhwa village. These results were different from urban apartment housing trends. 5) Storage space practically absent in those rural houses, and this was similar to urban the trends in urban apartment houses.

• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.61-74
• /
• 1992

In order to provide fundamental data for the design of geotextile drains, the in-plane permeability coefficients were determined by tests and permeable cllaracteristics were investigated, mainly on domestic nonwoven and composite getextile products used for drainage purpose. The results obtained are as follows, The thickness, the in-plane permeability coefficient and the transmissivity with the in- crease of compressive stress are found to be remarkably decreased when the compressive stress is lass than about 10KN/m2. The inflane permeability of filament nonwovens are found to be lower than that of composites or staple-fiher nonwovens, and the compressibility of the geotextile shown to be larger for the polyester nonwovens than for the polypropylene nonwovens. The relation of compressive stress, q and compressibility, Cr is expressed as Cr=13.37 In q+23.28 and that of compressibility on the basis of 2KN /m2, Cr' and decrease ratio of in-plane permeability coefficient is followed Pr: 1.25Cr'

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.51-56
• /
• 2008

In this paper, we propose a printed planar antenna suitable for mobile wireless communications. Since the printed antenna is easy to fabricate due to simplicity, low cost, and light weight, it is widely used in communications systems. The conventional patch antenna takes too much surface area to be applied to a mobile receiver. Although the size is reduced using the printed antenna, still reasonably wide bandwidth should be considered. To overcome the disadvantage of narrow bandwidth, the substrate should be physically thick and the dielectric constant should be small. In this work, we suggest a simple form of printed planar antenna and show the optimal input impedance depending on the antenna size and operating frequency. The performance evaluation is achieved analytically for a prototype antenna model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05a
• /
• pp.46-49
• /
• 2003

전원장치의 소형 경량화 및 고효율화를 위한 핵심 기술인 변압기를 설계 및 제조하기 위해 넓은 유효단면적을 가진 평면 자성체와 편편하고 넓은 도체를 이용하여 고주파 손실을 감소시켜 고주파 대역용 전원장치에 채용 가능한 입력 220 V, 출력 15V, 300 W급 포워드(Forward) 평면 변압기를 설계 및 제조하고 전자기적 특성과 입출력 신호 특성을 측정하였다. 1차 코일과 2차 코일의 권선수는 각각 15회와 2회 그리고 여자(demagnetizing) 권선은 15회로 설계하였으며, 변압기의 총 발열은 $44.78^{\circ}C$로 설계 및 제작하였다. 스위칭 주파수 100kHz에서 1.65mH의 인덕턴스 값을 얻었으며, 100 V의 입력전압에 대하여 13 V의 안정한 구형 출력파형을 얻었다. 따라서 스위칭 듀티(duty)가 최고 0.4로 설계되었기 때문에 설계 목표한 15 V 출력에 유사한 전압을 나타내어 평면 변압기의 설계 방법을 확립하였으며, 평면 변압기의 응용 가능성을 확인할 수 있었다.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.175-185
• /
• 2011

Geometric information is a key element for evaluating traffic safety and road maintenance. This study developed an algorithm to identify horizontal alignment using global positioning system(GPS) and inertial navigation system(INS) data. Roll and heading information extracted from GPS/INS were utilized to classify horizontal alignment into tangent, circular curve, and transition curve. The proposed algorithm consists of two components including smoothing for eliminating outlier and a heuristic classification algorithm. A genetic algorithm(GA) was adopted to calibrate parameters associated with the algorithm. Both freeway and rural highway data were used to evaluate the performance of the proposed algorithm. Promising results, which 90.48% and 88.24% of classification accuracy were obtainable for freeway and rural highway respectively, demonstrated the technical feasibility of the algorithm for the implementation.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.6-15
• /
• 2010

Objective: The aim of this study is to find the most helpful midsagittal reference plane for diagnosis in PA cephalometry compared with 3D CT. Methods: The subjects consisted of 25 adults who showed no facial asymmetry by gross inspection. 3D CT and posteroanterior cephalogram of the subjects were taken. To find the most helpful midsagittal reference plane in PA cephalometry, we considered five kinds of midsagittal planes from which the distances to five landmarks were measured and compared the result with that of 3D CT. The midsagittal plane for 3D CT was determined by the landmarks Nasion, Sella and Basion. Results: PA measurements using the midsagittal reference plane on a perpendicular plane lying through the midpoint of the right and left latero-orbitales was closest to those of 3D CT. Conclusions: It was considered that latero-orbitale perpendicular could be used as the helpful midsagittal reference plane to assess facial asymmetry in PA cephalometry.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.177-179
• /
• 2008

최근 전원부의 소형화 경향에 따라 에너지 변환 소자인 변압기의 소형 경량화 요구가 가속화 되고 있다. 전원부의 고효율 소형화를 위해서 평면 변압기가 대두되고 있다. 이에 따라 본 논문에서는 8[W]급 플라이-백(Flyback) 평면 변압기의 PCB(Printed Circuit Board) 패턴을 FERROXCUBE 사의 평면 변압기 설계 방법을 따라 개념 설계를 하였다. 120[kHz]의 스위칭 주파수에서 동작하는 평면 변압기의 자계 분포(magnetic intensity), 와전류(eddy current), 전계 분포(electric intensity)를 유한 요소법(Finite Element Method)을 이용하여 분석하였다.