• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.173-180
• /
• 2014

In this paper, the instrument flight certification process and flight test results of Korean Utility Helicopter (KUH) are presented. For the instrument flight certification, the suitability of installed equipments and instruments have been reviewed and verified by ground and flight tests. Next, static and dynamic stability test are conducted in accordance with FAR-29 Appendix B. The static stability is determined by the change of speed and attitude according to control inputs. The dynamic stability is evaluated by how quickly the response of the helicopter due to long and short period control inputs are decreased. The pilot workload evaluation are also carried out by simulated IMC flight tests. This paper presents the workload assessment results when some failures are occurred at cockpit instruments, engine or flight control systems as well as the normal situation. After the simulated IMC flight test is completed, actual instrument flight test are conducted in a real IMC environment according to the air traffic controls.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2017

Recently, safety-critical aviation system development programs promoted domestically have been terminated in the middle stage or they have not been put to practical use at the final stage. The program failure may be caused by various factors, but this study focused on imperfect test and evaluation(T&E) procedures. In general, T&E process of a safety-critical system must be distributed throughout the entire life-cycle of the system, have a continuity in phases, and can be implemented in a variety of ways depending on the maturity of the system development and acquisition strategy. This paper aims to present a new strategy by analyzing the domestic and overseas T&E processes to reduce the risk of domestic safety-critical CNS/ATM system development program and increase the success rate of program. First, we discuss the verification and validation techniques for safety-critical systems, analyze the T&E procedures of advanced institutes and the domestic situation, and then compare the domestic and overseas T&E processes to complement the imperfect testing procedure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.188-196
• /
• 2009

In Concrete, shrinkages occur like plastic shrinkage and drying shrinkage in the early age because of evaporation and transfer of moisture. Within the country, the crack test standardized by KS is used to test the drying shrinkage of the concrete by using the restricted drying shrinkage of Dumbbell type mold, but this test is for the cracking-point and the restricted shrinkage stress. Thus it is difficult to valuate the crack quantitative test. In this study, it is intended to develop the Flat-ring type restrained test method for the shrinkage deformation movement of the concrete and to provide the quantitative data for evaluating the cracks in concrete. And it suggest the proper specimen diameter and quantitative test method about shrinkage crack properties on Flat-ring type restrained test method. And Verified the suitability.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.9-15
• /
• 2023

Compaction is performed in civil engineering sites to secure the stability of the ground and prevent settlement. While the process of compaction is crucial, it is also essential to evaluate the degree of compaction after the completion of the process. In domestic sites, the evaluation of compaction is mainly conducted on a small number of spot using point-based tests such as plate load tests and sand cone tests. The methods presented so far allow assessment of surface compaction, but evaluating compaction in deeper layers poses challenges. Moreover, due to the limited coverage of point-based testing, it is difficult to achieve an overall assessment of compaction. As a solution to these issues, the Spectral-Analysis-of-Surface-Waves (SASW) tests were utilized to evaluate compaction. SASW tests offer a broader measurement range compared to point-based tests, and depending on the test setup, this method can provide the stiffness of the ground at greater depths. In this study, SASW tests were conducted in a compacted soil site under different conditions to assess compaction. Additionally, Nuclear Density Gauge tests were conducted concurrently to compare and verify the results of SASW. The research results confirmed the feasibility of evaluating compaction using SASW at the geotechnical site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.26-37
• /
• 2019

Recently, standardization of installation progress and technology of site acceptance test(SAT) for energy storage system(ESS) are being required due to performance of ESS depending on working condition and environment even though the quality and safety of each component of ESS　is guaranteed. And also, it has been required to perform not only performance testing by H/W equipments but also performance verification by S/W tool, in order to more accurately and reliably validate the performance of the ESS in advanced countries. Therefore, this paper proposes evaluation algorithm for SAT to evaluate performance of ESS and presents modeling of SAT test equipment for ESS by using PSCAD/EMTDC. Furthermore, 30[kW] scaled portable test equipments is implemented based on the proposed algorithm and modeling. From the various simulation and test results, it is confirmed that performance of ESS related to characteristics of capacity and Round-trip efficiency, Duty-cycle efficiency, low voltage ride through(LVRT) and Anti-islanding can be accurately evaluated and that the simulation results of PSCAD/EMTDC are identical to test results of 30[kW] test equipment.

• KHousing
• /
• v.6
• /
• pp.23-27
• /
• 2008

한국주거학회 자격관리위원회는 자격검증을 위한 과목 선정을 위해 다수의 검정과목안의 장단점을 비교 분석하고, 국내 12개 주거학과의 의견조회 결과를 참고로 하여, 현행 주거학과의 교과과정을 잘 포괄하고 있고 직무영역의 능력을 균형적으로 평가할 수 있는 (가칭)2급 주택사 검정과목(안)과 직무영역의 평가가 강화된 (가칭)1급 주택사 검정과목을 제안하였다. (가칭)주택사는 설정된 검정과목에 따라 2급 주택사의 검정방법은 1차, 2차로 구분하여 실시하고 1차는 기본 지식 및 이론을 평가하는 객관식 시험형태를, 2차는 실무능력을 평가하는객/주관식 혼용의 시험형태를 제안하였다. 1급 주택사는 1차에 한하며 실무의 전문성을 평가하기 위한 논술형을 시험형태로 하였다. 또한 응시자격은 국가기술자격법 시행령 제 21조 제1항과 관련하여 2급의 경우 "기사"등급에, 1급의 경우 "기술사" 등급에 해당하는 자격을 기준으로 제안하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.108-111
• /
• 2017

High performance upper stage engine is necessary for space launch vehicles of geostationary orbit, and staged combustion cycle engine is suitable due to high specific impulse. Technology demonstration model for 9 tonf class staged combustion cycle engine, which is consisted of turbopump, preburner, combustion chamber and supply system, was assembled, and hot-firing test was conducted for three seconds in Upper-stage Engine Test Facility of Naro Space Center. Ignition, combustion and shut down of engine system was performed normally, and its performance parameters were evaluated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.73-80
• /
• 2008

Experimental study has been performed in order to construct the standard test methods and appraisal criteria by investigating the influence of specimen types(property, width, layers) and loading rate on the tensile characteristics of FRP used in strengthening RC structures. The FRP composite tested in this study are the unidirectional CFRP sheet/strip and the bidirectional GFRP sheet. Test variables consist of the various width ranging from 10mm to 25mm and number of CFRP sheets plied up to 5 layers. Test results indicated that maximum tensile strength and minimum coefficient of variation are recorded at each different width according to the fiber types and weaving directions. Also, the average tensile strengths of CFRP sheets are decreased as the number of layer of CFRP sheet are increased.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.172-187
• /
• 2024

In good laboratory practice (GLP), analytical method validation prior to toxicity testing is important in terms of concentration setting and sample preparation. The testing agency performed validation of the two requested test substances using high-performance liquid chromatography (HPLC), and as a result, the analysis satisfied the criteria for specificity, system suitability, linearity, intra-day reproducibility, homogeneity, stability, concentration analysis, and quality control. The method was established and validated. However, the content of standard substances in the test report of the requesting institution was found to be 1.34 and 1.17 times higher than the results of the testing institution, confirming that deriving results through validation of analysis methods suitable for GLP is important in terms of securing reliability and stability.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.330-332
• /
• 2008

본 논문에서는 전력계통의 신뢰도를 평가하는 새로운 패러다임인 확률론에 근거한 신뢰도 평가에 대하여 살펴보았다. 확률론 신뢰도 평가 기법의 적용을 통하여 기존 결정론 접근법에서 다루지 못하였던 전력계통에서 발생하는 여러 가지 불확실성을 고려한 신뢰도 평가가 가능 하였으며 확률 신뢰도 평가 기법 중 시뮬레이션 기반 Monte-Carlo 기법을 적용하여 발전 및 부하의 블확실성까지 고려한 통합적인 신뢰도 평가 틀을 개발하였다. 더하여 개발된 신뢰도 평가 틀을 시험 계통에 적용하여 검증을 수행하였다.