• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1389-1392
• /
• 2009

본 연구에서는 기상청에서 관측하고 있는 서울지점을 대상으로 일강우자료를 활용하여 강우사상의 변화 특성에 대한 변동성과 경향성 분석을 수행하였다. 분석대상자료는 서울지점에서 관측된 일강우자료를 1958년부터 2007년까지 50년간 자료를 이용하였다. 일강우자료를 이용하여 연강우량, 계절별강우량 및 월별강우량을 추출하였다. 또한, 각 연, 계절 및 월별로 일강우량이 지속기간별로 1, 2, 3, 4, 5, 7일 최대강우량과 일강우량이 발생한 강우깊이가 분석대상기간에 따라 0, 10, 30, 50, 70, 80, 90, 95, 99% 이상 발생한 강우일수에 대한 분석을 수행하였다. 분석 결과에서 평균과 표준편차의 변동성은 일부 자료에서 확인되고 있으며 경향성은 거의 없는 것으로 나타났다. 그러므로 강우사상의 특성의 평균과 표준편차가 변화하고 있으므로 이에 대한 심도 있는 연구가 필요하다.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.137-141
• /
• 2006

To consider the practical use of a ship's Digital Compass in earth's magnetic field high accurate Deviation and 얘 nation are required to obtain ship's true bearing. Variation can be obtain with World Magnetic Model (WMM) using the Earth's spherical harmonic model of the main field and of the secular variation at any location around the earth. Deviation can be obtain with deviation analysis and synthesis method based on the Poisson equations. As results of deviation and variation corrections to the Digital Compass, high accurate true bearing is obtained. This experiments are carried out during in the navigation of training ship 'SAE-NU-RI'.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.57-60
• /
• 2015

병원에서 사용되는 임상용 모니터의 관리는 중요하다. 모니터의 기본적 관리는 휘도이며, 휘도에서도 균일도가 가장 먼저 관리되는 대상이다. 특히 LCD 모니터인 경우 균일도에 문제가 모니터의 교체주기와 일치하는 경우가 많다. 휘도에 대한 평가는 여러 가지가 존재하지만, 본 연구에서는 AAPM TG18에 따라 TG18-UNL10, TG18-UNL80을 이용하여 휘도의 균일도를 조사하였다. 이 조사과정에서 측정값 중 가장 높은 수치를 기준으로 나머지 값의 편차를 구하는 방법과 평균값을 이용하여 측정값의 편차를 구하는 방법 두 가지를 사용하였으며, 두 가지 방법의 유의성을 알아보고자 휘도의 편차 변화량 즉, 균일도를 측정하였다. 휘도 균일도의 정량평가는 향후 모니터의 관리에 가장 큰 영향을 미치는 인자로써 측정기간 중 변화량은 매우 적게 나타났다. 따라서 본 연구에서 제시된 최대, 최소값의 편차나 평균값의 상대 편차값 모두 유의한 결과를 얻을 수 있었다.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.94-101
• /
• 2016

Satellite data for remote sensing technology has limitations, especially with visible range sensor, cloud and/or other environmental factors cause missing data. In this study, using land surface temperature data from the MODerate resolution Imaging Spectro-radiometer(MODIS), we developed retrieving methods for satellite missing data and developed three methods; mean bias, regression analysis and local variation method. These methods used the previous day data as reference data. In order to validate these methods, we selected a specific measurement ratio using artificial missing data from 2014 to 2015. The local variation method showed low accuracy with root mean square error(RMSE) more than 2 K in some cases, and the regression analysis method showed reliable results in most cases with small RMSE values, 1.13 K, approximately. RMSE with the mean bias method was similar to RMSE with the regression analysis method, 1.32 K, approximately.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.695-703
• /
• 2015

Acceptance criteria for chemical admixtures of cement concrete were investigated in domestic and international specifications. The reliability was verified for solid content test method of chemical admixture examined statistical analysis by round robin test. The applicability of FT-IR spectroscopy for qualitative measurement of multi-compound chemical admixtures verified. From solid content experimental results, outlier analysed using Cochran, Grubbs and Dickson's Q test. Repeatability and reproducibility standard deviation for solid content results showed 0.25 and 0.098% respectively according to KS A ISO 5725-2 procedure, it can be confirmed reliability of test methods. FT-IR spectrum of liquefied or oven-dried chemical admixtures condition showed big differences. It is needed that the FT-IR analysis is performed on dry material. However there's no difference with the applicability of FT-IR spectroscopy for multi-compound chemical admixtures. So the utility of method analysis could not identify.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.335-341
• /
• 2019

In order to provide basic data for uniformization of temperature distribution in heating greenhouses, heating experiments were performed in two greenhouses with a hot water heating system. By analyzing heat transfer characteristics and improving pipes layout, measures to reduce the variation of pipe surface temperature and to improve the uniformity were derived. As a result of analyzing the temperature distributions of two different greenhouses and examining the maximum deviation and uniformity, it was found that the temperature deviation of greenhouses with a large amount of hot water flow and a short heating pipe was small and the uniformity was high. And it was confirmed that the temperature deviation was reduced and the uniformity was improved when the circulating fan was operated. The correlation between the surface temperature of the heating pipe and the indoor air temperature was a positive correlation and statistically significant(p<0.01) in both greenhouses. It was confirmed that the indoor temperature distribution in a hot water heating greenhouse was influenced by the surface temperature distribution of heating pipe, and the uniformity of indoor temperature distribution could be improved by arranging the heating pipe to minimize the temperature deviation. Analysis of the heat transfer characteristics of heating pipe showed that the temperature deviation increased as the pipe length became longer and the temperature deviation became smaller as the flow rate in pipe increased. Therefore, it was considered that the temperature distribution and the uniformity of environment in a greenhouse could be improved by arranging the heating pipe to shorten the length and controlling the flow velocity in pipe. In order to control the temperature deviation of one branch pipe within $3^{\circ}C$ in the tube rail type hot water heating system most used in domestic greenhouses, when the flow velocity in the pipe is 0.2, 0.4, 0.6, 0.8, $1.0m{\cdot}s^{-1}$, the length of a heating pipe should be limited to 40, 80, 120, 160, 200m, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.124-136
• /
• 2006

The change pattern of the sediment grain size distribution information (median grain size(D50)) due to some gridding method and sampling density is analyzed with reference to the grid information estimated by the 90 sediment samples which was collected in the coastal water off the Baengnyeongdo Island, in June 2004. The standard deviation of absolute deviation (AD) estimated the selected gridding method shows 8.0 ${\mu}m$ at June, 2004 and 10 ${\mu}m$ November, 2004. The estimated statistical information of absolute deviation in comparison with the grid information of reference and changed sampling density shows that the AD mean error trends increase as the number of samples decrease. The AD mean error is below 10% in the case of the information estimation using 50-sample with reference to the 90-sample information. In this case, the sampling density is suggested as about 9 sediment samples per $km^2$, at coastal zone in Yoggipo port in the condition of the study area is 5.9 $km^2$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.813-821
• /
• 2015

In this paper, we analyzed the problems of a batch-type sterilizer and design a continuous sterilizer to control the temperature deviation. The temperature deviation is analyzed with respect to design parameters such as a nozzle diameter, hole diameter, and nozzle length. The significant temperature parameters are optimized using the response surface methodology. An experimental apparatus is developed using the optimized design parameters. Using a field test, we show that the target temperature is obtained in about 7.3 minutes and the temperature deviation is improved about $0.84^{\circ}C$. The optimized parameters from the test are equal to the analytical parameters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.315-321
• /
• 2004

To compare soil carbon contents by Tyurin method and dry combustion method, we carried out analysis for 212 samples of agricultural land in Korea. The average values of soil carbon contents analyzed by Tyurin method and dry combustion method were $17.47{\pm}10.80$ and $19.91{\pm}10.63g\;kg^{-1}$, respectively. Both methods were evaluated as acceptable methods for soil carbon contents as the results showed. The results showed that soil texture had little effect on analysis method of carbon contents. Highly significant linear regression equation, Y = 0.846X ($R^2=0.991$), was obtained between carbon contents analyzed by Tyurin method (Y) and dry combustion method (X). As a result of comparison with data of carbon contents of the two methods, about 69% of results at dry combustion method have exceeded to results at Tyurin method. Especially, differences between results at two methods became higher as carbon contents were increasing. Tyurin method has been advantages such as shorter analysis time for one sample, more recognition for carbon analysis, and no need for expensive analyzer, while dry combustion method has simpler procedure, no heavy metal wastes, and more samples for analysis at one time.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.246-253
• /
• 1999

Grain size distributions of sediment samples were analyzed by the different methods, and the results were compared. Reported data of the bottom sediments from the Korean seas show significant deviations among the institutes, and the inter-lab comparison and calibration procedures are considered to be necessary. Grain size data by different methods show different results. Laser diffraction method provides good precision in replicate analysis, but underestimates the amounts of finer (smaller than 2-3 ${\mu}m$) fraction. Data from particle settling method, on the other hand, represent significant errors in the coarse silt (5-6 ${\phi}$) fraction, and slightly overestimate the clay fraction. In the sieve and pipette methods, best results were taken in 0.5 ${\phi}$ interval of analysis. Especially in the coarse silt fraction, pipette analysis is suggested to be made with 0.5 ${\phi}$ interval. During the dry sieving procedure in 1 ${\phi}$ interval, serious errors occur when large amounts of sample materials were concentrated in a particular sieve.