• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.80-86
• /
• 2017

The purpose of this study is to construct a pattern database of pipes and cavities buried in the ground to prevent ground subsidence. To do this, it developed a pattern template algorithm using Open CV and applied it to the results of GPR detection results of tank. As a result, proper pattern database construction was possible. Since the results of this study are based only on limited experimental results, it is expected that more realistic data will be constructed if various field data and detection results of large test beds are supplemented in the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.128-128
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2555-2557
• /
• 2003

본 논문에서는 열화된 이미지상에서의 자동 패턴 분할을 위해 농담 정규화 정합(NGC)법과 다중 템플레이트를 이용하여 검사 이미지내의 각 문자의 정합 계수치 합을 이용한 문자나 패턴을 자동으로 분할(segmentation)하는 알고리즘을 제안한다. 전통적인 NGC를 사용하는 검사 알고리즘은 기준 패턴의 기하학적인 level 값에 의해 계산되어 지기 때문에 검사 이미지의 획득이 불완전하다면 정합의 부독율(reject rate)은 높아진다. 제안한 알고리즘은 가시화가 좋지 않은 영상 회득 시 문자부와 배경부를 효과적으로 자동으로 분류하며 이미지 영역내의 정보와 정규화 된 상관관계를 이용하여 실제 영상에 적용시켜 제안된 알고리즘의 검증을 목표로 한다.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.683-690
• /
• 2005

As remote sensing imagery with high spatial resolution (e.g. pixel resolution of 1m or less) is used widely in the specific application domains, the requirements of advanced methods for this imagery are increasing. Among many applicable methods, the texture image analysis, which was characterized by the spatial distribution of the gray levels in a neighborhood, can be regarded as one useful method. In the texture image, we compared and analyzed different results according to various directions, kernel sizes, and parameter types for the GLCM algorithm. Then, we studied spatial feature characteristics within each result image. In addition, a template matching program which can search spatial patterns using template images selected from original and texture images was also embodied and applied. Probabilities were examined on the basis of the results. These results would anticipate effective applications for detecting and analyzing specific shaped geological or other complex features using high spatial resolution imagery.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.170-170
• /
• 2004

• Journal of KIISE:Software and Applications
• /
• v.35 no.3
• /
• pp.162-168
• /
• 2008

A look-up table based vector adaptive filter is proposed in color inverse halftoning. Inverse halftoning converts halftone image into a continuous-tone image. The templates and training images are required in the process of look-up table based methods, which can be obtained from distributed patterns in the sample halftone images and their original images. Although the look-up table based methods usually are faster and show better performances in PSNR than other methods do, they show wide range of qualities depending on how they treat nonexisting patterns in the look-up table. In this paper, a vector adaptive filter is proposed to compensate for these nonexisting patterns, which achieves better quality owing to the contributed informations about hue, saturation, and intensity of surrounding pixels. The experimental results showed that the proposed method resulted in higher PSNR than that of conventional Best Linear Estimation method. The bigger the size of the template in the look-up table becomes, the more outstanding quality in the proposed method can be obtained.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.377-382
• /
• 2006

In this paper, two methods based on the use of morphology and pattern matching prior to detect classified defects automatically on the back light unit which is a part of display equipments are proposed. One is the template check method which detects small size defects by using closing and opening method, and the other is the block matching method which detects big size defects by comparing with four regions of uniform blocks. The TC algorithm also can detect defects on the non-uniform pattern of BLU by using revised Otsu method. The proposed method has been implemented on the automatic defect detection system we developed and has been tested image data of BLU captured by the system.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.205-210
• /
• 2022

We demonstrated roll-to-roll microcontact printed (mCP) microlens array (MLA) to enhance the light extraction of organic light emitting diodes (OLEDs). The commercially provided microlens array is used as a template for polydimethylsiloxane (PDMS) roll stamp. The fluorinated film is formed on the PDMS roll stamp from fluorinated ink with low boiling point and printed onto the bottom side of the organic light emitting diode without high pressure and high thermal treatment. With optimized concentration of ink, the pattern which is almost identical to that of the template MLA was successfully printed. Due to the structure and low optical absorbance of microcontact printed MLA, the external quantum efficiency of OLED was improved by about 18%.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.38-42
• /
• 2015

Polydimethylsiloxane (PDMS) is a widely used material for replicating micro-structures because of its transparency, deformability, and easy fabrication. At the nanoscale, however, it is hard to fill a nanohole template with uncured PDMS. This paper introduces several simple methods by changing the surface energy of a nanohole template and PDMS elastomer for replicating 100nm-scale structures. In the case of template, pristine anodic aluminum oxide (AAO), hydrophobically treated AAO, and hydrophillically treated AAO are used. For the surface energy change of the PDMS elastomer, a hydrophilic additive and dilution solvent are added in the PDMS prepolymer. During the molding process, a simple casting method is used for all combinations of the treated template and modified PDMS. The nanostructured PDMS surface was investigated with a scanning electron microscope after the molding process for verification.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.542-548
• /
• 2012

Morphological characteristics and formation of symmetric polystyrene-block-poly(1,4-butadiene) copolymer (PS-b-PBD) in thin films upon solvent-annealing were investigated by using atomic force microscopy (AFM). The thin films solvent-annealed in cyclohexane revealed the perforated lamellae of poly(1,4-butadiene) in the matrix of polystyrene while those solvent-annealed in n-hexane exhibited highly disordered patterns. Interestingly, when the thin films of PS-b-PBD were solvent-annealed with binary mixtures of cyclohexane and n-hexane, the morphological transition from the perforated lameallae to the perpendicularly-oriented lamellae of poly(1,4-butadiene) could be induced by changing the mixing ratio of both solvents. We also demonstrated that after microdomians of poly(1,4-butadiene) were successfully degraded by UV-$O_3$, linear poly(dimethyl siloxane) chains were back-filled into the etched regions of the thin film and then converted to silica nano-objects by oxygen plasma treatments.