• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.50-57
• /
• 2001

Magnetic inductive probe was designed and assembled for sensing the residual stress developed in the ferromagnetic thin sheet. The residual stress measurement system with this probe could resolve the residual stresses developed in the sheet in terms of principal stress orientation, and magnitude of the principal stress. It was consumed that the obtained probe output voltage from the qualified ferromagnetic Fe-42Ni lead frame sheet and quality-rejected sheet is effectively determined using the developed device. The lead frame sheet which has accumulated a high level of residual stress always showed a distinctive stress distribution and magnitude compared with those of qualified lead frame sheet. Those differences were well resolved as functions of input current or used frequency.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.223-227
• /
• 2007

New forming technologies are being introduced to automotive manufacturing processes. Among them, a simultaneous forming is one of the innovative forming technologies to be able to reduce production time and cost. Several parts can be simultaneously manufactured by the process, while the conventional stamping demands the same number of die sets with the number of parts. In this study, the automotive rear floor side member was manufactured by the simultaneous forming. The position and the size of initial blank were determined by forming analyses and try-outs, and the blank movement during the forming was controlled by introducing the spotweld.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.61-62
• /
• 2011

실리카 나노입자를 분산시킨 기능성 코팅 소재를 개발하였다. 본 기능성 코팅 소재는 마그내슘 판재에 적용하여 내스크래치 및 내부식성을 향상시키기 위한 것이다. 최근 마그네슘 판재는 스마트 폰 및 이동통신 기기의 외장재소재로 각광을 받고 있다. 그러나 표면의 기계적 강도가 약하고, 특히 수분에 의한 부식이 심각하여 사용에 많은 제한을 받고 있다. 본 연구에서는 실리카 나노입자가 분산된 유무기 하이브리드 코팅을 적용하여 기계적 강도 및 내부식성을 향상하고자 하였다. 분산하는 나노입자의 크기를 달리하여 코팅층으로부터 각각 다른 물리적 화학적 특성을 유도할 수 있었다. 각 코팅 층의 특성은 연필경도, 기판 휨 각도, 그리고 electrochemical impedance spectroscopy 등을 이용하여 평가하였고, 최종적으로 휴대폰 신뢰성 평가 기법을 적용하여 상용화 적용성도 평가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.617-624
• /
• 2010

Line heating is a manufacture method, which was widely used to machining a curved surface in the ship construction. The qualities using by line heating are very difference compare to the proficiency level of the engineer. So it's mainly depend on the automation equipment instead of the proficiency level engineer. In this study, it would be investigate the temperature distribution of the heating plate, which was used by the automation equipment according to line heating. The main factors are the moving velocity of the heating source, strength and the heating method separately, in temperature distribution while line heating. In this paper, it was investigated the temperature change with the vary of each three variables. The numerical result showed that peak temperature decrease if the moving velocity of the heating source increased. It can also calculate the change quantitatively that the peak temperature and temperature distribution changed linearly with the vary of the heating source.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.565-570
• /
• 2011

There is always die roll in fine blanking parts which is able to have 100% clean shear surface. In this paper the change of die roll size was studied by fine blanking tryout in order to minimize die roll size. Various die inserts with different die chamfer were machined, fine blanking die was manufactured and tested. The die roll sizes of fine blanking samples were measured and the tendency of thickness directional die roll size was comprehended. This result will be used on the design of die chamfer in order to minimize thickness directional die roll size of fine blanking parts

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.59-59
• /
• 2004

최근의 전자통신 및 정밀의료 부품들은 제품의 경량화 및 집적화로 인해 크기는 작으면서도 많은 기능이 요구되어지는 다기능ㆍ소형화 추세에 있다. 따라서, 부품들은 복잡한 형상에 초고기능과 초정밀도가 요구되어 고강도의 재료와 MEMS 및 Nano-technology로 성형ㆍ가공된다. 이러한 방법은 고비용을 요하며 실용화에 많은 문제점을 내포하고 있다. 반면에 이러한 부품들을 생산단가가 저렴한 전통적인 소성가공기술로 생산할 경우에는 부품의 강도 및 정밀도에 한계를 갖게 된다.(중략)

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.204-206
• /
• 2003

Ti/Steel 클래드 판재를 제조하기 위하여 티타늄과 강판을 직접 접합하는 경우 접합 계면에 취성이 강한 금속간화합물 및 TiC 탄화물이 발생하여 계면접합강도를 저하시키는 단점이 있다. 이러한 단점을 보완하기 위하여 본 연구에서는 티타늄과 강판 사이에 니켈 박판을 삽입한 후 1223-1323K 온도구간에서 접합 실험하였다. 특히, 온도의 변화에 따라 티타늄과 강판의 계면에 발생되는 금속간화합물의 종류 및 반응층의 크기 변화에 따른 기계적 특성을 조사하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.38-45
• /
• 2000

In this research, MFL technique has been studied for the inspection of storage tank floor. The reference specimens having 20%, 40%, 60% and 80% slot's are fabricated using the carbon steel plates of a 6mm and 10mm thick. Powerful permanent magnets and Hall effect sensors are used to this application. It is shown that our system is able to detect metal loss like a slot. Also, it is possible that slot diameter is measured using transverse type of Hall generator. It is demonstrated that MFL can not differentiate between the response from top side and bottom side slot. Flux leakage response from a bottom side indication is significantly lower in amplitude than that from an equivalent top side slot. It is essential to know this sensor lift-off distance because the MFL signal also changes considerably with the sensor lift-off distance.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.109-115
• /
• 2005

The experimental work was performed to investigate the effect influenced to the hystresis and the flexural strength improvement of RC beam using carbon fiber plates. Major parameters of this experimental program were the section size of carbon fiber plates and the damage level of RC beam before reinforcement. Particularly, the damage level of beam is for the cases damaged by overloads. The damage level is for 30%, 60%, and 100% of flexural strength, and no damaged beams were also tested for comparison with the damaged one. from the test results, it showed that the beams reinforced by carbon fiber plates had the higher strength and lower deformation capacity than the general beams and that it had the same ductility ratio of the general beams.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.107-112
• /
• 2006

The elastic waves in a plate are dispersive waves due to the characteristics of Lamb waves. However, S0 symmetric mode is less dispersive in the frequency region below the first cut-off frequency. The wave Propagation velocities vary with the direction in anisotropic plates such as Carbon Fiber Reinforced Plastic (CFRP) Plates. The wave vector direction and energy flow vector direction are same in isotropic plates. However, the wave vector direction same as the phase velocity direction is not in accordance with the energy flow direction same as the group velocity direction in anisotropic plates. In this study. the dispersion curves or the phase velocity from anti-symmetric and symmetric Lamb wave dispersion equation are calculated for unidirectional laminated composite plate. Slowness surface is sketched using phase velocity under the first cut-off frequency. The direction and magnitude of group velocity are corrected with this slowness surface. The measured group velocities are in good agreement with the corrected group velocity curve except near the fiber direction zone which is called the cusp region.