Browse > Article
http://dx.doi.org/10.5916/jkosme.2010.34.5.617

Study on Temperature Distribution for Various Conditions of Moving Heating Source During Line Heating Process  

Choi, Yoon-Hwan (부경대학교 스마트기계사업단)
Lee, Yeon-Won (부경대학교 기계자동차공학과)
Choi, Kwang (포항산업과학연구원)
Publication Information
Journal of Advanced Marine Engineering and Technology / v.34, no.5, 2010 , pp. 617-624 More about this Journal
Abstract
Line heating is a manufacture method, which was widely used to machining a curved surface in the ship construction. The qualities using by line heating are very difference compare to the proficiency level of the engineer. So it's mainly depend on the automation equipment instead of the proficiency level engineer. In this study, it would be investigate the temperature distribution of the heating plate, which was used by the automation equipment according to line heating. The main factors are the moving velocity of the heating source, strength and the heating method separately, in temperature distribution while line heating. In this paper, it was investigated the temperature change with the vary of each three variables. The numerical result showed that peak temperature decrease if the moving velocity of the heating source increased. It can also calculate the change quantitatively that the peak temperature and temperature distribution changed linearly with the vary of the heating source.
Keywords
Moving heat source; Line heating; Residual deformation; Peak temperature; Conductive heat transfer;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 P. Biswas, N. R. Mandal and O. P. Sha, "Three-dimensional finite element prediction of transient thermal history and residual deformation duo to line heating", Proc. IMECHE, vol. 221, pp.17-30, 2007.
2 H. Nogami, J. Yagi, "An application of Bingham model to viscous fluid modeling of solid flow in moving bed", ISIJ International, vol. 44, no. 11, pp. 1826-1834, 2004.   DOI   ScienceOn
3 N. N. Rykalin, "Calculation of heat processes in welding", Peace Publisher, pp. 136-141, 1960.
4 A. Moshaiov and R. Latorre, "Temperature distribution during plate bending by torch flame heating", J. of ship research, vol. 29, pp. 1-11, 1985.
5 J. L. Evans, "Design and construction of lining of no. 4 blast furnace, Port Talbot Works", Ironmaking and Steelmaking, vol. 21, no. 2, pp. 101-113, 1994.
6 이주성, 이정호, "선상가열법에 의한 강판의 변형 예측식 개발", 한국해양공학회지 제22권 제 6호, pp.83-87, 2008.   과학기술학회마을
7 Toru Iwao, "Numerical simulation of argon twin torch plasma arc for high heating efficiency", Vacuum, vol. 83, pp. 34-38, 2009.
8 우종훈, 신종계, "선상가열을 위한 토치와 강판 사이의 열유동 해석", 대한조선학회 논문집, 제 39권 제2호, pp.52-60, 2002.   과학기술학회마을