• Water for future
• /
• v.28 no.6
• /
• pp.159-168
• /
• 1995

The run-up and the evolution of solitary waves on steep beaches are investigated by using a two-dimensional boundary integral equation model. The model is first used to compute the run-up heights of solitary waves on a relatively mind slope. The model is verified by comparing the computed numerical solutions with available experimental data, other numerical solutions and approximated analytical solutions. The agreement between the present numerical solutions and the other data is found to be excellent. The model is then applied to the calculation of run-up heights on very steep slopes. As far as the maximum run-up of solitary waves is concerned, the boundary integral equation model provides reasonable and reliable solutions. Finally, the evolution on steep beaches is also examined and the obtained wave heights are compared with those calculated from the Green's law.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.640-647
• /
• 2010

Many methods have been proposed to detect faults of carrier phase measurements, but there are no distinguished methods for land transportation systems. in this paper, the baseline constraints are used to detect faults in GPS carrier phase measurements with vehicle dynamic information. The faults include the multipath on GPS carrier measurements. Multiple antenna groups are used for this research. In the measurement domain the fault detection has been accomplished so that the implementation is easier than other methods.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.135-146
• /
• 2003

Uphole test is a seismic field test using receivers on ground surface and a source in depth. In this paper, the uphole test using SPT(standard penetration test) which is economical and reliable for obtaining shear wave velocity profile was introduced. In the proposed uphole test, SPT sampler which is common in site investigation, was used as a source and several 1Hz geophones in line were used as receivers. Test procedures in field and interpretation methods for obtaining interval times and for determining shear wave velocity profile considering refracted ray path were introduced. Finally, uphole test was performed at three sites, and the applicability of the proposed uphole test was verified by comparing wave velocity profiles determined by the uphole test with the profiles determined by downhole test, SASW test and SPT-N values.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.210-212
• /
• 2019

위성항법시스템의 취약성에 따른 보완 시스템의 필요가 높아지면서, eLoran 시스템이 가장 현실적인 대안으로 인정받고 있다. 우리나라도 서해 일부 지역에서 eLoran 시스템의 테스트베드 구축 사업을 진행 중에 있다. 전 해양지역에 안정적인 서비스를 제공하기 위해서는 추가적인 송신국 설치가 필요하지만. 여러가지 현실적인 이유로 인해 추진되기 어렵다. 이런 문제를 해결하기 위해 기존의 NDGNSS 기준국을 활용한 측위기술이 개발되고 있다. 이미 운영 중인 NDGNSS 기준국을 활용하면 전 해상에서 탄력적 항법시스템 운용이 가능해질 수 있다. 본 논문에서는 eLoran 시스템과 NDGNSS의 기준국을 활용한 지상파 통합항법시스템의 성능을 예측할 수 있는 시뮬레이션 툴을 제작 하였다. ITU에서 배포한 송출 주파수와 거리에 따른 신호 세기, 대기잡음 등을 고려해 Cramer-Rao Lower Bound로 수신 신호의 측정 거리 오차를 계산하였다. 또한 한빛호가 항해하면서 수집한 DGPS 신호를 통해 실질적인 대기잡음을 추정하는 방법을 사용해 기존보다 정확한 SNR 계산이 가능해졌다. 해당 결과는 추후 진행될 지상파통합항법시스템 개발에 유용하게 활용될 것으로 기대된다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.324-334
• /
• 2011

Seismic wave velocity change has been monitored due to the accumulation of micro-cracks by uniaxial loads on the rock samples from Seokmo Island with stepwise increase in 5 stages. After the load was applied up to 95% of UCS, P- and S-wave velocities varied in ranges of 0.9 ~ 18.3% and 2.8 ~ 14.8% of fresh rock sample velocities, respectively. Unlike seismic velocity of the dry rock samples that showed overall decreases after the loading, velocity changes of saturated rock samples were much more complicated. These seemed to be due to the mixture of two contradictory mechanisms; i.e. accumulation of micro-crack causes an increase in porosity and a decrease in wave velocity, while saturation causes an increase in wave velocity. Most of tested rocks showed a trend of velocity increase with low axial load and then velocity decrease at later stages. Starting stage of velocity decrease differs from samples to samples. After the failure of rock occurred, noticeable increases of porosity and decreases of wave velocity have been observed. It showed overall trend that the more the quartz contents and the lower the silicate, the higher the Young's modulus.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.89-89
• /
• 2015

항만 및 어항 구조물을 구성하는 다양한 해안구조물은 파랑의 천수효과, 굴절, 회절, 부분반사, 해저마찰, 쇄파의 영향 등을 고려해야하며 파고 및 파향 등의 해양특성의 검토가 반드시 이루어져야 한다. 실제의 해양파가 방향스펙트럼을 갖는 다방향 불규칙파라는 것은 잘 알려져 있으며, 기존의 해안구조물의 내파설계 또는 천해역의 파랑변형 검토에 있어서도 실제 해양파에 보다 가까운 다방향 불규칙파를 이용한 수리모형실험에 의해 파랑현상을 정도 높게 재현하는 것은 매우 중요하다. 본 연구에서는 실제 해양파를 정도 높게 재현할 수 있는 다방향 불규칙파 조파장치를 사용하여 구조물 전면해역에서의 파랑스펙트럼을 재현하고, 심해에서 발달된 파랑이 천해로 진행될 때 지형에 의해 발생되는 천수변형과 구조물 주위에서 나타나는 파랑변형의 현상을 고려하여 항내로 유입되는 파랑의 분포 특성을 검토하였다. 특히, 다방향 불규칙파로 인한 항내 파고분포 특성을 검토하기 위하여 동일 파랑에 대한 규칙파 및 불규칙파랑을 조파하여 그 결과를 상호 비교하였다. 아울러, 정온수역유지를 위한 월파현상을 수리적으로 재현할 수 있는 3차원 수리모형실험 수행하여 월파현상이 항내정온도에 미치는 영향을 고찰, 해석하여 항만 시설물 계획시 안정한 정박 및 이용에 대한 가능한 정온유지여부를 검토하였다.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.245-249
• /
• 2004

This paper shows the reconstruction of existing composition chord program using back propagation neural network. In this approach, in order to produce the expectation values, weight values are controlled by neural network which rued chord pattern as a input vector. Experimental results showed that proposed approach is superior to a popular chord pattern method rather than existing composition program.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.545-554
• /
• 2003

Design of the optical modulator composed of a three-waveguide coupler and CPW traveling-wave electrodes was carried out. Switching phenomena of three-waveguide couplers were analyzed by using the coupled mode theory, and the coupling-lengths of the devices were calculated by means of the FDM. CPW traveling-wave electrodes were analysed by the CMM and SOR simulation technique in order to find the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electrolyte technique. The fabricated modulator chip was end-polished, pig-tailed and packaged in a brass mount with K-connector. The insertion loss and the switching voltage of the optical modulator were about 4㏈ and 19V, respectively. Network analyzer was used to obtain the S parameter and the corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted to be Z$_{c}$= 45 Ω, N$_{eff}$=2.20, and $\alpha$$_{0}$=0.055/cm√GHZ. The measured optical response R($\omega$) was compared with the theoretically estimated one, showing both responses agree well. The measurement results revealed that 3㏈ bandwidth turned out to be about 13 GHz.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.229-238
• /
• 2006

암반터널굴착을 위한 발파시 이로 인한 암반의 최종 손상영역을 예측하는 것은 터널의 안전성을 위해 매우 중요하다. 그러나 복잡한 발파거동은 손상영역을 적절히 예측하는데 상당한 어려움이 있다. 이러한 어려움을 효과적으로 해결하기 위해 발파하중을 응력파와 가스압으로 분리한 많은 연구가 진행되었다. 응력파는 발파공 주위에 분쇄한(crushing annulus)과 파쇄균열대(fracture zone)를 형성시키며, 상당시간 지속되는 준정적인 가스는 파쇄균열대의 닫힌 균열내부에 침투하여 균열을 다시 진행시키는 역할을 하게 된다. 즉, 가스압은 최종적으로 암반에 손상을 가하는데 기여를 한다. 따라서 본 논문은 이러한 가스압에 의해 생성되는 균열의 최종 진행 길이를 예측함으로써 발파로 인한 최종 손상영역을 간단하게 예측할 수 있는 방법을 제시하고자 한다. 이를 위해 무한 탄성평면에서 발파공 주위에 대칭으로 형성되는 균열을 모델로 사용하였다. 이 모델에서 균열이 진행할 수 있는 조건과 가스의 질량이 일정하다는 두가지 조건을 사용하였다. 그 결과 응력집중계수는 균열이 진행할수록 감소하여 최종균열의 길이를 예측할 수 있었고, 그와 동시에 발파공에 작용하는 압력도 감소하는 것을 확인할 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.29-36
• /
• 2005

The crustal structure of Korean Peninsula is investigated by analyzing phase velocity dispersion data of Rayleigh wave. Earthquakes recorded by three component seismographs during 1999 - 2004 in South Korea are used in this study. The fundamental mode signals of Rayleigh waves are obtained from vertical components of seismograms by multiple filter technique method and phase match filter method. Velocity dispersion curves of surface waves for 14 propagation paths on the great circle are computed from the fundamental mode signals on the great circle path by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocities of Rayleigh wave are inverted. The result models are regarded as average structure for surface wave propagation paths respectively. All the results can be explained by an earth model of the Korean Peninsula comprising crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to 33 km depth and uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec.