• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2466-2472
• /
• 2013

Post-dispersion compensation methods for the 3000 km long-haul transmission distance using 10 Gbps 40 wavelength division multiplexing channels were analyzed and compared. First, each channel was compensated by an individual dispersion value, next each group of eight channels by an individual value, and lastly all forty channels by a single value. Considering the lower and highest performance channels and their values, the post-dispersion compensation method by each channel group showed the possibility to simplify the transmission system without sacrifice of signal performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1117-1120
• /
• 2003

DWDM(DensedWavelengthDivisionMultiplexing)은 광 파이버를 이용하여 기존의 통신보다 높은 대역폭(B/W)을 얻기 위한 기술로 여러 신호를 각각 다른 파장으로 변조해 하나의 Fiber 를 통해 전송하는 방식이며, 기본적으로 EDFA(Erbium Doped Fiber Amplifier), AWG(Arrayed Wave guide Grating), OADM(Optical Add/Drop Multiplexer) 등의 주요 부품과 여러 광 관련 부품들로 구성돼 있으며, 다수의 파장을 MUX(AWG)에서 다중화하고, 장거리 전송을 위해 OA(EDFA)에서 광신호를 증폭하게 된다 그리고 일부 특정 파장만 Add/Drop하기 위해 OADM이 놓이게 되며, 또한 선로(광섬유)의 손실을 보상하기 위해 필요한 구간에 리피터(EDFA)를 두어 광신호를 증폭 송신하며 수신단에서는 들어오는 여러 파장을 OA(EDFA)를 통해 증폭한 후 DEMUX(AWG)에서 역 다중화해 수신하게 된다. 이와 같은 DWDM방식을 이용한 Network는 Star, Mesh, Ring 등의 다양한 형태로 구성될 수 있으며, 초기에는 Point-to-Point 방식의 장거리 전송에 주로 사용돼 왔으나 Metro 구간의 Traffic 이 급격히 증가하면서 Metro- DWDM Network 이 부각되고 있어 본 논문에서는 현재 SK Telecom에서 상용화되고 있는 1,600G DWDM과 Metro-DWDM간의 망 구축의 최적화 방안을 연구해 본다.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.151-156
• /
• 2023

We propose to implement cost-effectively a high-speed short-haul interconnect by transmitting a 200-Gb/s/λ two-channel optical time-division-multiplexed signal generated by a carrier-suppressed optical pulse, which improves the robustness of the multiplexed signal to chromatic dispersion. The multiplexed 200-Gb/s signal is generated in the transmitter by combining two 100-Gb/s 4-level pulse-amplitude-modulated signals (generated using the optical pulse and two Mach-Zehnder modulators). After the signal is transmitted over a fiber, it is amplified by a semiconductor optical amplifier and detected by a photodiode. The amplified spontaneous emission noise is eliminated by an optical band-pass filter. The transmitted signal is reconstructed by a 2 × 2 multiple-input multiple-output equalizer, which compensates for crosstalk. Due to the use of the carrier-suppressed optical pulse, the 200-Gb/s signal can be transmitted over fiber with a chromatic dispersion of 40 ps/nm.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.172-173
• /
• 2001

다중 광접속 방법 중 CDMA는 많은 수의 주소(개별 사용자를 위한 채널)를 제공하고 광 패킷 전송 방법에 있어서는 패킷들의 충돌을 피하기 위한 복잡한 장치를 필요로 하지 않는다는 장점을 가지고 있다. LED와 같은 Incoherent 광원을 이용하는 광 CDMA를 위한 여러 가지 광 코드와 암호화 방식이 제안되어 왔으며, 파장/시간 이차원 광 코드를 이용하는 방식은 AWG mux/demux 또는 AWG 라우터를 이용하여 광 코드가 용이하게 구현될 수 있음이 보고된 바 있다. (중략)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.197-203
• /
• 2013

Optical power optimization of 10 Gbps 40 wavelength division multiplexing channels was analyzed at the 3000 km long-haul transmission distance when the link span distance was changed between 40 km and 140 km. The signal performance of the transmission was obtained as a Q value and it was compared when input power into SSMF and input power into DCF on the transmission link were changed. The optimized input power into SSMF increased linearly to link span distance with 1 dB/km. The optimized power into DCF increased linearly with 0.5 dB/km up to 100 km link span, but it had no variation at longer link span than 100 km.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1207-1215
• /
• 2004

A Gigabit Ethernet upstream transmission over a WDM-PON employing remotely wavelength-locked Fabry-Perot lasers has been demonstrated. We have successfully demonstrated a WDM transmission of four Gigabit Ethernet channels with 100 GHz channel spacing over 30 km conventional single mode fiber. The measured f-factor was larger than 17.1 dB. We have also investigated the beating noise characteristics of a wavelength-locked Fabry-Perot laser and showed the remotely wavelength-locked Fabry-Perot laser suppresses the intensity noise of the incoherent light injected, which cause a 6.3 dB SNR improvement compared with that of the conventional spectrum-sliced light source.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.561-568
• /
• 2017

In order to effectively utilize the Coarse Wavelength Division Multiplexing(CWDM) technology in optical integrated devices, a design of a wavelength selective coupler structure between an optical fiber and an optical waveguide in a flat substrate is can be considered. In this paper, we consider the coupling between a silicon waveguide with an air trench and a single mode fiber. We investigated the tendency of coupling efficiency and its limitations according to the grating depth. For this purpose, the coupling efficiency of coupler structure designed through modeling based on coupled mode theory is predicted and quantitatively compared with simulation results using finite element method.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.1
• /
• pp.97-106
• /
• 2006

In the next-generation Internet backbone network, DWDM technology was appeared as an alternative to solve circuit shortage of existing TDM-based Internet. In this DWDM Network, it is inevitable to consider wavelength-conversion function as well as RWA in case of setting up connection for the efficient use of resources and customer satisfaction. This study is to describe an efficient strategy for the wavelength-conversion function with a limited range and for the use of a wavelength converter with the selected node, and to verify the optimum use of a wavelength converter through the performance test.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.27-33
• /
• 2001

The performance of the ordinary Fiber Bragg Grating(FBG) sensor strain measurement system, which uses Fabry-Perot filter for scanning wavelength, has limitation for application because of hysteresis characteristics of PZT element in the filter, slow scan rate of the filter and the high cost of system. We proposed and experimented a multiple FBG sensor system using light emitting diode(LED) as a light source and adapting Code Division Multiplexing(CDM) method to separating out individual sensor signal. Output signals for a applied static and dynamic strain and crosstalk levels between sensor signals were measured. The price of the system is very loss and the response speed is very fast. Crosstalk levels between sensor signals below - 30 dB were demonstrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.807-809
• /
• 2004

본 논문에서는 광 부호분할다중접속(OCDMA) 시스템 구현을 위해 각 가입자의 시간ㆍ파장영역의 2차원 부호할당 및 변경이 가능하고 다중 사용자의 암호화된 데이터의 동시 전송과 모든 수신 노드에서 복원이 가능한 OCDMA 시스템 구조를 제안하였다. 또한 기존의 이중 광 하드리미터를 제한증폭기와 AND 게이트를 사용하여 이중 전기 하드리미터를 구현하였다. 서로 다른 파장을 갖는 레이저 다이오드와 FPGA를 이용한 전기 상관기로서 시간과 파장영역의 2차원으로 부호 다중화된 동시 가입자 신호에서 특정 가입자의 신호를 복원하였고, 제한 검출기와 위치 검출기의 이중 전기 하드리미터를 이용하여 MAI로 인한 기존 OCDMA 시스템에서의 식별력 저하와 비트오류 문제를 해결하였다.