• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.202-207
• /
• 2001

The added resistance of a ship advancing in waves can be split into the resistance due to the radiation wave and the resistance due to the diffraction wave. In this study, the former has been calculated by a method based on Maruo's formula. The latter must be calculated by other methods. Ship motion is calculated by the usual strip method. The amplitude of two dimensional far-field waves is calculated using the improved Green integral equation. The present numerical method can be used for the estimation of the added resistance due to the radiation wave since the present numerical result is much smaller than other existing numerical results considered to be overestimated.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.56-61
• /
• 1993

Standard values in graphic porms are presented for the ratio of added wave resistance to the sun of added wave and wind resistances in head sea for three ship types, tanker, container ship and passenger ship. The effect of ship length on the ratio defined above is investigated for the three ship types. Obique sea added resistance is determined using wave direction reduction factor. The factor is obtained from model test results and cubic spline interpolation technique.

• 대한조선학회지
• /
• 제55권1호
• /
• pp.35-44
• /
• 2018

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.173-174
• /
• 2018

온난화 현상으로 북극 해빙 속도가 가속화되면서 북극 운항 선박이 증가하고 있어 선박의 안전 항해를 위한 기술개발이 요구되고 있다. 본 연구에서는 선박해양플랜트연구소에서 개발 중인 KRISO Arctic Safe Routing System(KARS)의 안전 최적항로 계획 방법의 선박실 운항 추진성능 모델 과 선박 고유의 빙 저항 추진 성능 데이터베이스 구성 내용을 소개하였다. 추진성능 모델은 예인 수조시험의 속도-마력 -RPM 성능 데이터와 실 운항에서 조우할 수 있는 바람, 파도 등의 외란에 기인하는 부가저항 및 빙해수조 결과를 바탕으로 다양한 빙상환경에 따른 빙 성능 추정결과를 활용하여 ISO15016: 2002 기반으로 Calm sea 및 빙 해역에서의 선박 속도-마력 성능에서 외란에 의한 부가저항에 따른 소요마력 및 속도변화를 추정하도록 하였다. 제안된 성능모델은 최적 북극항로 탐색 모듈과 결합되어 안전한 북극항로를 도출할 수 있음을 확인하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권2호
• /
• pp.150-155
• /
• 2012

예인선의 주요 목적의 하나는 구난 작업시 다른 선박을 예인하는 것이다. 예인선이 이러한 작업을 안전하게 수행하기 위해서는 적절한 예인력을 가질 수 있어야 한다. 따라서 예인 작업중 피 예인선박에 대한 저항을 추정하는 것은 매우 중요하고도 필수적인 과정이다. 본 논문에서는 예인력을 추정할 수 있는 선박의 저항 계산 프로그램을 연구하였다. 계산 프로그램은 정수중의 기본 선체 저항과 바람, 표류, 선체 표면 거칠기, 파랑, 천수 및 조류에 의한 부가저항을 계산하는 기능을 가지고 있다. 모든 추정값은 도표 또는 수식을 이용하는 통계적이고 경험적인 방법으로 계산된다. 본 프로그램에 의한 계산 결과는 미국 해군의 예인 매뉴얼로부터 계산된 결과와 비교하였다. 그 결과 본 프로그램은 손상 선박의 저항을 적절히 추정할 수 있는 유용한 프로그램이라고 판단된다.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.75-86
• /
• 1992

본 논문에서는 파랑중에서 소수선면 쌍동선(SWATH ship)의 저항증가에 관하여 해석적 및 실험적으로 다루었다. 여러가지 SWATH 모델들이 파고가 높아질수록 총저항이 정수중에서의 저항보다 적어진다는 특이한 현상들이 실험적으로 저자에 의해 보고되었다. 그 원인을 규명하기 위한 첫번째 단계로서 선형화된 3차원 diffraction 이론을 바탕으로 하여 SWATH선에 작용하는 1차 및 2차 힘들을 분석하였다. 또한 파랑중에서 SWATH선의 속도가 대응하는 단동선 및 다른 고속 선형에 비해 월등히 우세하다는 것을 보여준다.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.385-393
• /
• 2018

In this study, the analysis of 2DOF (2 Degree Of Freedom) motion and added resistance of a ship in regular head waves is carried out using RANS (Reynolds Averaged Navier-Stokes) approach. In order to improve the accuracy for large amplitude motions, the dynamic overset scheme is adopted. One of the dynamic overset schemes, Suggar++ is applied to WAVIS which is the in-house RANS code of KRISO (Korea Research Institute of Ships and Ocean Engineering). The grid convergence test is carried out using the present scheme before the analysis. The target hull form is KRISO VLCC tanker (KVLCC2) and 13 wave length conditions are applied. The present scheme shows the improved results comparing with the results of WAVIS2 in the non-inertial reference frame. The dynamic overset scheme is confirmed to give the comparatively better results for the large amplitude motion cases than the non-inertial frame based scheme.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.132-142
• /
• 2017

As the International Maritime Organization (IMO) recently introduced the Energy Efficiency Design Index (EEDI) for new ships building and the Energy Efficiency Operational Indicator (EEOI) for ship operation, thus an accurate estimation of added resistance of ships advancing in waves has become necessary. In the present study, OpenFOAM, computational fluid dynamics libraries of which source codes are opened to the public, was used to calculate the added resistance and motions of the KCS. Unstructured grid using a hanging-node and cut-cell method was used to generate dense grid around a wave and KCS. A dynamic deformation mesh method was used to consider the motions of the KCS. Five wavelengths from a short wavelength (${\lambda}/LPP=0.65$) to a long wavelength (${\lambda}/LPP=1.95$) were considered. The added resistance and the heave & pitch motions calculated for various waves were compared with the results of model experiments.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.62-68
• /
• 2016

A simple calculation tool for added resistance in waves is developed to utilize for initial design or embedded module for navigation support system. In order to select an appropriate calculation method for added resistance in waves, three methods (drift method, integrated pressure method, radiated energy method) based on strip method are applied to Wigley I and KVLCC2. The methods for added resistance in waves give the underestimated results because it is difficult to consider nonlinear effects due to reflected wave. We apply asymptotic (Faltinsen's method) and empirical formula (NMRI's method) to improve the accuracy for short wave length region. In comparison with experimental results, the combination of radiated energy method and short wave correction method of NMRI is the most reasonable. However, a simple sum of results calculated by two methods gives rise to the overestimation of added resistance for short wave length region because added resistance of radiated energy method exits in total reflection region. To overcome this problem, modified radiated energy method is proposed using correction coefficient defined by reflection coefficient of NMRI's method. Finally, added resistance in regular waves is composed of added resistance of modified radiated energy method and that of short wave correction method of NMRI. Estimated added resistance in regular waves is validated by comparison with experimental results of other research groups.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.290-297
• /
• 2015

This research is focusing on the added resistance and seakeeping ability of the designed passenger ship with gooseneck bulb(Designed hull) which provide the improvement of resistance performance under calm water condition. By comparing the added resistances and seakeeping abilities of the reference hull and the designed hull form with gooseneck bulb, it is confirmed that there is little difference in the operational comfort and the reduction of ship speed. As a result, the applied gooseneck bulb in this study is verified for the applicability to medium-sized passenger ships with a good resistance performance.