• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.77-81
• /
• 2007

We sputtered $TiN_x$ (titanium nitride) thin films on silicon substrates using ultra high vacuum RF magnetron sputtering method, and measured spectra of ellipsometry angles ${\Delta}$ and ${\Psi}$ in the photon-energy range of 1.5-5.0 eV using a variable angle spectroscopic ellipsometer. The optical constants, refractive index and extinction coefficient of the $TiN_x$ films were determined via the dispersion parameters extracted from the curve-fitting process based on Drude+Lorentz oscillator dispersion function. The reliability of determined optical constants were verified through the comparison of between simulated reflectance and reflectance spectra measured using a spectrophotometer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.196-196
• /
• 2012

염료감응 태양전지는 실리콘 태양전지에 비해 단가가 낮고 반투명하며 친환경적 특성으로 차세대 태양전지로 주목을 받았으나 염료의 안정성의 문제와 특정 파장대의 빛만 흡수하는 단점을 가지고 있다. 이러한 문제점을 해결하기 위하여 양자구속 효과에 의해 크기에 따라 밴드갭 조절이 용이하여 다양한 파장대의 빛을 흡수 할 수 있는 양자점 감응태양전지가 많은 관심을 받고 있다. 하지만 양자점 감응 태양 전지의 활성층으로 사용되는 반도체 산화물인 이산화티타늄의 두께는 $13{\sim}18{\mu}m$로 짧은 확산거리로 인해 전하수집의 한계를 가지고 있다. 이를 극복하기 위해 인듐 주석 산화물 나노선을 합성하여 전자가 광전극에 직접유입이 가능하도록 해 빠른 전하이동 및 전하수집을 가능하게 한다. 인듐 주석 산화물 나노선은 증기수송 방법(VTM)을 이용하여 인듐 주석 산화물 유리 기판 위에 $5{\sim}30{\mu}m$ 길이로 합성하였다. 전해질과 전자가 손실되는 것을 방지하기 위해 원자층 증착법(ALD)을 이용하여 이산화 티타늄 차단층을 20 nm 두께로 코팅한 후 화학증착방법(CBD)을 이용하여 인듐 주석 산화물 나노선-이산화 티타늄 코어-쉘 구조를 만든다. 마지막으로 황화카드뮴, 카드늄셀레나이드, 황화아연을 증착시킨 후 다황화물 전해질을 이용하여 양자점 감응 태양전지를 제작하였다. 특성 평가를 위해 전계방사 주사전자현미경, X-선 회절, 고분해능 투과 전자 현미경을 이용하며 intensity modulated photocurrent spectroscopy (IMPS), intensity modulated voltage spectroscopy (IMVS)를 이용하여 전하수집 특성평가를 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.6
• /
• pp.299-308
• /
• 1992

Titanium nitride(TiN) has been synthesized by nitrogen ion irradiation onto the Ti thin film deposited on STD11 and SKH9 tool materials. The effect of irradiation flux and substrate temperature on the formation behavior and mechanical properaties of TiN were investigated through X-ray diffraction analysis, hardness and pin-on-disc wear testings. Nitrogen ion irradiation onto arc evaporated Ti thin film produced TiN of < 200> orientation at elevated temperature and thereby enhancing surface microhardness by 50% at maximum. Wear resistance was also improved by nitrogen irradiation at most process conditions. The enhancement of wear resistance appeared to be more effective for the nitrogen irradiated conditions at room temperature than at elevated temperature.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.307-312
• /
• 2004

Extensive efforts have been made in an attempt to utilize photocatalytic properties of $TiO_2$ in visible range. $TiO_2$ and TiO-N thin films were made by the DC reactive magnetron sputtering method at $300^{\circ}C$. Various gases (Ar, $O_2$ and $N_2$) were used and Ti target was impressed by 0.6 kW-5.8 kW power range. The hysteresis phenomenon of the $TiO_2$ thin film as a function of the discharge voltage characteristic was observed to be higher as applied power increases. That of TiO-N thin film was occurred at the 5.8 kW power. The cross section and surface roughness of thin films were observed by FE-SEM and AFM. Average surface roughness of TiO-N thin film was observed as $15.9\AA$ and that of $TiO_2$ as $13.2\AA$. The crystal phases of both $TiO_2$ and TiO-N thin films were found to be anatase structure. The atomic $\beta$-N (396 eV peak in N 1s XPS) was shown in the rutile crystal of TiO-N and was considered acting as the origin of wavelength shift to the visible light.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.190-197
• /
• 2012

We employed the vinyl ethylene carbonate (VEC) as an electrolyte additive and investigated the effect of the electrolyte additive on the electrochemical performance in hybrid capacitor. The activated carbon was adopted as cathode material, and the $Li_4Ti_5O_{12}$ oxide was used as anode material. The electrolyte was prepared with the $LiPF_6$ salt in the mixed solvent of ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate(EMC). We evaluated the electrochemical performance of the hybrid capacitor with increasing the amount of the VEC electrolyte additive, which is known as the remover of oxygen functional group and the stabilizer of the electrode by reducing the surface of electrode, and obtained the superior performance data especially at the addition of the VEC electrolyte additive of around 0.7 vol%. On the contrary, the addition of the VEC more than 0.7 vol% in the electrolyte leads to the degradation in electrochemical performance of hybrid capacitor, suggesting the increase of the side reaction from the excessive VEC additive. X-ray photoelectron spectroscopy (XPS) revealed that the addition of the VEC suppressed the formation of LiF component, which is known as the insulator, on the surface of electrode. The optimized addition of VEC exhibited the improved capacity retention around 82.7% whereas the bare capacitors without VEC additive showed the 43.2% of capacity retention after 2500 cycling test.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.61-74
• /
• 2011

The material characteristics of Chos$\breve{o}$n whiteware were investigated by analyzing and comparing the body and glaze compositions of whiteware shards excavated at the Kwangju royal kilns, Ch'unghyodong, and four other local-level kilns. In Korea, the rise of whiteware technology began in the early years of the Chos$\breve{o}$n dynasty, when the indigenous tradition of Kory$\breve{o}$ celadon was strongly influenced by the whiteware aesthetics of the Chinese Ming dynasty. The Kwangju royal kilns eventually made hard-textured whiteware of a quality equivalent to that of the Chinese by using type of porcelain stone that contained slightly less $Fe_2O_3$ and $TiO_2$ and slightly more $K_2O$ than that used for celadon. In contrast, the potters of Ch'unghyodong achieved the same level of quality by finding and using a totally different material: kaolinitic clay. The porcelain stone used at the Kwangju kiln was commonly found in Korea and south China, whereas kaolinitic clay (which has a high aluminum content) was typically found in north China, and was only rarely used in Korea. The flux component of the glaze compositions was mostly limestone, first in burnt form and later in crushed form, and the clay component was often glaze stone, which was a finer-grained porcelain stone with a higher proportion of feldspar. In the future, this comparative analytical study of Korean whiteware components should be extended to the $18^{th}$- and $19^{th}$-century kilns that are currently being excavated at a rapid pace.