• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.366-375
• /
• 2013

Recently, management of Newspaper developmet of the internet news, broadcasting and free newspapers escalated competition between newspaper companies and other media companies as well as competition among newapaper companies. This paper analyzes the efficiency of Korean Newapaper using DEA model. We evaluate the CCR-O, BCC-O efficiency, SE and RTS of 30 Newspaper. We also suggest the Newpaper which can be benchmarked based on analyzed information. The result shows that ten Nespaper whose values of CCR-O efficiency are 1, and Fourteen Nespaper whose values of BCC efficiency are 1. RTS indicates IRS of 1 firms, DRS of 16 firms and CRS of 13 firms. To variables on the effectiveness of newspaper publishing companies for the understanding and performance analysis.

• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1361-1370
• /
• 2006

Recently fast innovation of Internet technology causes lot of application to change into web application and requirement for the inter-operable communication among various systems are increased rapidly. These trends are part of changes which is caused by ubiquitous world and it is just beginning of huge waves that is required to fit and change under the ubiquitous environments. This thesis is focused on the Design and Implementation of Layer Structured Components which can be interfaced effectively for the Material Management System under the Heterogeneous Client Server Environments. The key points to do that kinds of affairs are using XML web services that can communicate thru systems and also using independent layered components for the enforcement of reusability and inter-operability. For the various type of testing of implementation, we used RFID System, PDA, Desktop Systems and confirmed the normal operation without concerning the type of client system and platforms. The Components proposed in this thesis could be reused effectively in case of developing similar applications.

• The Korean Journal of Financial Management
• /
• v.12 no.2
• /
• pp.43-71
• /
• 1995

본(本) 연구(硏究)는 한국증권시장(韓國證券市場)에서 무위험자산이 존재하지 않을 경우에 대용시장(代用市場)포트폴리오의 효율성(效率性) 검증(檢證)을 다변량(多變量)의 검증방법(檢證方法)에 의해 실시하고자 하였다. 검증을 위하여는 첫째로 제로베타수익률을 구하고자 하였으며 이는 Kandel(1984)과 Shanken(1985)의 연구에 기초하여 추정하는 방법을 제시하였다. 둘째로 Jobson-Korkie(1982,1989), Handel(1984,1986)과 Shanken(1985,1986)의 논문(論文)에 의거 대용시장포트폴리오의 효율성을 검증하는 과정을 유도하고 이의 검증(檢證) 통계량(統計量)을 유도하였다. 효율성 검증에 사용된 대용시장포트폴리오들은 한국종합주가지수(韓國綜合株價指數), 한경(韓經)다우지수(指數)와 2개의 동일가중지수(同一加重指數)이었다. 실증적 연구결과, 전기간(全期間)의 경우에 한국종합주가지수(韓國綜合株價指數)와 한경(韓經)다우지수(指數)의 평균수익률은 GMVP의 수익률보다 낮을 뿐만아니라 평균-분산(平均-分散)프론티어의 외부(外部)에 위치하여 이 대용시장지수(代用市場指數)들이 효율적(效率的)프론터어상에 있는가에 대한 검증(檢證)은 불가능하였다. 그리고 하위기간별분석(下位期間別分析)에서도 이 대용시장지수(代用市場指數)(후반기(後半期)의 한경(韓經)다우지수(指數) 제외)들은 평균-분산프론티어의 내부(內部)에 있어 효율성 검증은 가능하였다. 그러나 이는 대용시장지수(代用市場指數)가 효율적 프론티어상에 있는가에 대한 효율성 검증이 아니라 단순히 평균-분산프론티어상에 있는가에 대한 검증에 불과하였으며 이러한 검증 결과는 효율적(效率的)인 것으로 나타났다. 한편 한국증권거래소(韓國證券去來所)에 상장(上場)된 전 종목(種目)을 대상으로한 동일가중지수(同一加重指數)와 본 연구의 기준시점인 1980년도에 한국증권거래소에 상장된 종목을 대상으로 구성한 동일가중지수(同一加重指數)는 이들의 평균수익(平均收益)이 GMVP의 수익률보다 높을 뿐만 아니라 대용시장지수(代用市場指數)가 효율적(效率的) 프론티어 상에 있는가에 대한 효율성 검증에서 모두효율적(效率的)인 것으로 나타났다. 이러한 사실은 한국종합주가지수(韓國綜合株價指數)를 근거로 기관투자자들이 투자수익율(投資收益率)의 관점에서 포트폴리오를 구성하거나 CAPM의 실증적(實證的) 연구시에 대용시장지수(代用市場指數)로 사용하는 것은 문제점이 있는 것으로 판단되며 따라서 동일가중지수(同一加重指數)를 선택함이 바람직할 것으로 사료된다.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.3-16
• /
• 2017

This paper analyzed 16 regional total factor energy efficiency (TFEE) of the Korean manufacturing sector using data envelopment analysis method for the period of 2005-2013. According to the empirical results, it is necessary to use TFEE as well as partial energy efficiency defined by the ratio of energy usage to output (energy intensity) when we compare energy efficiency. Secondly, TFEE in the Korean manufacturing sector is quite different across 16 regions. For example, Gangwon province should improve energy efficiency by 55% compared to Seoul, Gwangju, Ulsan, and Gyeongbuk which are located on production frontier. Furthermore, the estimation of panel tobit regression model showed that the higher non fossil fuel using, the higher production share of large-sized firms, the lower energy intensity, and the lower capital-labor ratio could have positive effect on TFEE.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.110-116
• /
• 2009

Research for climate control seats is being vigorously pursued because requests for passenger's thermal comfort are increasing. Recently, thermoelectric devices have been applied to automotive seats for both cooling and heating operations. The climate control seats using thermoelectric devices can rapidly control the air temperature passing through the devices and directly affect the thermal comfort of passengers. The performance characteristics of the climate control seats were analyzed by experiments for two different types of a leather covered seat and a mesh applied seat. Experimental results show that the cooling and heating performance for the mesh applied seat by using the discharge port of the shape of nozzle was improved significantly in comparison with that for the leather covered seat. The variation of temperature between the inlet air and the outlet air of the climate control seat for the enhanced mesh applied type was by $-3.5^{\circ}C$ at cooling mode, and was by $15.0^{\circ}C$ at heating mode, after about 30 minutes, respectively. Also, it is possible to provide rapid thermal comfort to passengers sitting on the seat in the vehicle cabin by using the proposed climate control seat.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.93.2-93.2
• /
• 2018

최근 기후 변화 문제로 $CO_2$배출량 억제 정책에 따라 열전재료가 다양한 분야에 크게 주목 받고 있다. 열전 모듈은 전류를 흘려 온도차를 발생시키는 펠티어 효과와 온도차를 전력으로 변환하는 제백 효과를 이용한다. 열전발전용에 적용되는 상용 열전모듈의 경우, 열전소자의 접합부의 수는 수십 개 이상이다. 따라서 단 한 개의 접합 불량 열전소자가 모듈 전체의 열전성능에 큰 영향을 미친다. 현재 상용화 된 Bi-Te계 열전 모듈은 Bi-Te의 Te와 Sn계 솔더의 주성분인 Sn이 $250^{\circ}C$ 부근에서 취성의 Sn-Te계 금속 화합물을 형성한다고 알려져 있다. 이 때 생성된 Sn-Te 화합물은 열전모듈의 접합강도를 약화시키고 이로 인해 열전모듈의 접합 신뢰성을 크게 저하 시킬 수 있다. 이를 해결하기 위해 솔더와 소자 사이에 확산방지층이 적용되고 있으며, 이 중에서 니켈합금이 가장 널리 적용되고 있다. 니켈층을 형성시키는 방법 중에서, 무전해 도금법은 간단하게 열전소자 표면 위에 도금 층을 균일한 두께로 만들어 낼 수 있다. 하지만, 니켈 도금층과 Bi-Te 소자 간에 화학적 결함이 존재하지 않기 때문에, 무전해 니켈 도금층의 밀착성이 떨어진다. 이 때. 소자 표면에 거칠기 효과(anchor effect)를 부여하기 위해 물리적 샌딩법을 사용하는데 이 방법의 경우 소자에 크랙 같은 손상을 미쳐 열전모듈의 신뢰성 저하를 가져온다. 그러므로 거칠기 효과를 부여하면서 소자에 손상을 최소화하는 습식 식각법을 개발하여 Bi-Te계 열전소자의 표면 조도를 조절하고 무전해 Ni-P 도금을 실시하였다. 그리고 열처리 유무에 따른 열전모듈의 접합강도를 측정하였으며, 제작한 열전 모듈의 접합부 및 파단부의 계면 분석하여 무전해 Ni-P도금을 위한 습식식각법(wet etching법)에 대하여 검토하였다. N-type은 질산과 구연산의 혼합수용액에, P-type은 왕수에 습식 식각처리를 해서 적당히 표면 조도를 조절한 후에 EPMA로 분석을 해본 결과 니켈 도금층과 Bi-Te 소자 간에 anchor effect가 부여 된 것을 확인했다. 습식 식각에 의해서 제조된 열전모듈의 접합강도는 종래의 알루미나 샌딩법으로 제조한 열전모듈 보다 높은 접합강도를 나타내었다.

• Journal of Convergence Society for SMB
• /
• v.5 no.2
• /
• pp.15-20
• /
• 2015

Recently, as smart phone technology is developing, wearable devices is also accelerating. But, the wearable device is necessary to operated for a long time with a small electric power because werable device is made compact. In this paper, we design and implement efficient lithium polymer battery model suitable to miniaturized wearable device in oder to maximize ease of use. The proposed model is characterized by a compact size of the battery by applying a thermal element and a light-weight battery. Also, proposed model gives greatly improve the life of wearable devices because it uses a method using the characteristics of the Peltier device using the temperature difference between the room temperature and body temperature of a person to generate power for charging. In particular, the proposed model can be used for the wearable device, as well as auxiliary charging of the smart phone.

• Journal of Korea Game Society
• /
• v.16 no.1
• /
• pp.63-72
• /
• 2016

This study explores how players' characteristic factors affect on trolling behaviors. The data was collected through online survey from online communities of League of Legends(N=914, male=770, female=144, average of age=22.19, SD of age=4.78). Questionnaire includes age, level/tier, self-esteem, basic psychological needs, aggression, and trolling behaviors. Result shows that player characteristic factors which influence on players trolling behavior are 'age', 'physical aggression', 'verbal aggression'. Discussion suggests that the understanding of player's characteristics which influence on trolling behaviors has to precede the improvement of system structure in order to eradicate trolling behaviors.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.9
• /
• pp.1-6
• /
• 2019

Preterm children require a controlled environment that is as close as possible to that inside the womb. Incubators are well equipped to fulfill this requirement; however, they are cumbersome and expensive, thereby restricting their portability and availability in less developed and rural areas. This research comprises the development and system validation of a portable incubator. The system consists of a collapsible baby enclosure that can be stowed inside the system base when not in use. The enclosure is made from acrylic such that it is easy to clean and allows unhindered visual observation of the occupant while being robust enough to withstand transit conditions. The system can be powered either by a mains supply or a 12-VDC automobile power supply. Additionally, it has an onboard battery to ensure a continuous supply during transit. A Peltier plate controlled using a microcontroller ensures the desired enclosure temperature irrespective of the ambient temperature. Built-in sensor probes can measure the skin temperature, pulse rate, blood oxygenation level, and ECG of the infant and display them on the system screen. The system function is validated by testing its peak power consumption and the heating and cooling performances of the environment control system.