• Title/Summary/Keyword: 특이성 지수

Search Result 109, Processing Time 0.026 seconds

Suitability of Singularity Indices for Steering Law Design of Control Moment Gyros (제어모멘트자이로의 구동법칙 설계를 위한 특이성 지수의 적합성)

  • Jin, Jaehyun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.12
    • /
    • pp.1020-1027
    • /
    • 2014
  • Singularity indices for steering law design of CMGs have been analyzed. Several qualitative criteria to evaluate the suitability of indices have been suggested. Fast calculation and consistency with the condition number of the input matrix are the most important ones. Based on these criteria, modified indices have been proposed. Properties of infinite value and finite value indices have been compared and an ad hoc method to combine those properties has been presented. Computer simulation results are given to verify the proposed method.

A Method of Singularity Avoidance for A Robot-Positioner System (로보트와 포지셔너의 특이성 회피 방법)

  • Choi, Shin-Hyeong;Suh, Il-Hong;Lim, Joon-Hong;Kim, Kyung-Ki
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.26 no.6
    • /
    • pp.7-14
    • /
    • 1989
  • A trajectory control method being capable of singularity avoidance is proposed for a robot and positoner (R-P) system. In the proposed method, the damping factor of the Damped Least Square (DLS) method is adjusted by gradients of trajectory following errors so that the singularity avoidance can be achieved while mimimizing the errors. Two numerical examples are given by employing a Rhino robot with five degrees-of-freedom (d.o.f.) and two d.o.f's, where the method of maximizing the manipulagility the DLS method with a fixd damping factor and the proposed method are compared in terms of trajectory following errors, manipulabilities and joint velocities.

  • PDF

Analysis of Residual Stress Singularities on Interfaces of Friction Welded SUH35/SUH3 (SUH35/SUH3 마찰용접 접합계면에 대한 잔류응력 특이성의 해석)

  • Chung, Nam-Yong;Park, Chul-Hee
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.13 no.5
    • /
    • pp.104-111
    • /
    • 2005
  • With increasing use of SUH35/SUH3 dissimilar materials for automotive engine valves, it is required that stress singularities under residual stress on an interface for friction welded dissimilar materials analyzed to establish strength evaluation. The stress singularity $index{\lambda}$ and stress singularities $factor{\Gamma}$ were calculated from using the results of stress analysis to consider residual stress and loads. The stress singularities on variations for shapes and thickness of welded flashes were analyzed and discussed. This paper suggested that the strength evaluation by using the stress singularity factors as fracture parameters, considering the stress singularity on an interface edge of friction welded dissimilar materials will be useful.

Analysis of Stress Singularities on Interfaces of Friction Welded Dissimilar Materials (마찰용접에 의한 이종재 접합계면에 대한 응력특이성의 해석)

  • Chung, Nam-Yong;Park, Chul-Hee
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.13 no.2
    • /
    • pp.142-148
    • /
    • 2005
  • In this paper, the stress singularity on interface of friction welded dissimilar materials was investigated by using 2-dimensional elastic boundary element method. It is required that stress distributions and stress singularities on an interface for friction welded dissimilar materials analize to establish strength evaluation. The stress singularity index ($\lambda$) and stress singularity factor ($\Gamma$) were calculated from the results of stress analysis. The stress singularities on variations for shapes and thickness of friction welded flashes were analized and discussed. This paper suggested that the strength evalution by using the stress singularity factors as fracture parameters, considering the stress singularity on an interface edge of friction welded dissimilar materials were very useful.

Secondary Science Teachers' PCK Components and Subcomponents Specific to the Learning Environment in an Online-offline Mixed Learning Environment (온-오프라인 혼합 학습환경에서 중등과학교사의 학습환경 특이적인 PCK 요소 및 하위요소)

  • Jisu, Kim;Aeran, Choi
    • Journal of the Korean Chemical Society
    • /
    • v.66 no.6
    • /
    • pp.472-492
    • /
    • 2022
  • The purpose of this study was to investigate secondary science teachers' PCK components and subcomponents that are specific to online and offline learning environment. Data collection consisted of survey, class observation, and individual interviews of twelve science teachers. This study used a theoretical framework of PCK for deductive data analysis and articulated codes and themes through the following inductive analysis. Data analysis revealed that each of PCK components showed different specificity to the online and offline learning environment. And subcomponents of each PCK component were different according to the specificity of the online and offline learning environment. Teaching orientation toward science had a specific orientation for the online learning environment, i.e., 'learning science concept' and 'lecture centered instruction.' Knowledge of the science curriculum had online-offline mixed learning environment specific knowledge, i.e., 'reorganization of curriculum' and online learning environment specific knowledge, i.e., 'development of learning goal' and 'science curricular materials.' Knowledge of science teaching strategies had online learning environment specific knowledge, i.e., 'topic-specific strategy', 'subject-specific strategy', and 'interaction strategy' and COVID-19 offline learning environment specific knowledge, i.e., 'topic-specific strategy' and 'interaction strategy'. Knowledge of student science understanding had online learning environment specific knowledge, i.e., 'student preconception', 'student learning difficulty', 'student motivation and interest', and 'student diversity' and COVID-19 offline learning environment specific knowledge, i.e., student learning difficulty'. Knowledge of science assessment had online-offline mixed learning environment specific knowledge and online learning environment specific knowledge, i.e., assessment contents and assessment methods for each.

THE DENTAL CARIES, CARIOGENIC MICROORGANISMS AND LEVELS OF SALIVARY IMMUNOGLOBULIN IN SUBJECTS WITH DOWN'S SYNDROME (다운증후군 환자의 치아우식증과 치아우식 원인균 및 타액내 면역항체의 연관성)

  • Kim, Seon-Mi;Yang, Kyu-Ho;Choi, Nam-Ki;Kang, Mi-Sun;Lim, Hoi-Soon;Oh, Jong-Suk
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.34 no.1
    • /
    • pp.130-139
    • /
    • 2007
  • This study investigated the relationship between dental caries and various oral factors in subjects with Down's syndrome. We compared 25 subjects with Down's syndrome with 63 healthy control. The dental caries index and plaque index were examined, and the total salivary immunoglobulin A and S. mutans specific salivary immunoglobulin A concentration were measured using ELISA. The S. mutans counts, Lactobacillus counts and buffer capacity were measured with Dentocult test medium. The decayed and filled surface index of deciduous teeth in subjects with Down's syndrome was lower than in controls(p<0.001). The plaque index and total salivary immunoglobulin A concentration showed no difference, S. mutans specific salivary immunoglobulin A concentration and buffer capacity in subjects with Down's syndrome were lower than in controls(p<0.001). There was no significant difference between two groups in the S. mutans counts and Lactobacillus counts. In 9-11 year age group, S. mutans counts in subjects with Down's syndrome was lower than in controls(p<0.001) and S. mutans specific salivary immunoglobulin A concentration was lower(p<0.05). There was a high correlation among deciduous dental caries index and buffering capacity and S. mutans counts.

  • PDF

Analysis of Ecological Index of Plant Using Flora Distributed in Temple Forest (사찰림에 분포하는 식물상을 이용한 식물생태지수 분석)

  • Oh, Hyunkyung;Choi, Yeonho;You, Juhan
    • Journal of Environmental Impact Assessment
    • /
    • v.23 no.4
    • /
    • pp.251-270
    • /
    • 2014
  • The purpose of this study is to offer the basic data and method for assessing the naturaliness of temple environment by applying the ecological index of plant to quantitatively and objectively assess the flora and to understand the flora distributed in major temple forest. The ecological index of plant was based in the surveyed flora. The whole flora were summarized as 535 taxa including 103 families, 310 genera, 426 species, 5 subspecies, 82 varieties and 22 forms. And, the numbers of taxa in the Beopheungsa were 267 taxa, 314 taxa of the Daeseungsa and 296 taxa of the Seongjusa. The rare plants were 9 taxa including Aristolochia contorta, Viola albida, Arisaema heterophyllumand so forth, and the Korean endemic plants were 11 taxa including Clematis trichotoma, Stewartia pseudocamellia, Vicia chosenensis and so forth. The specific plants by floristic region were 51 taxa including Wistaria floribunda, Celtis aurantiaca, Angelica gigas and so forth, and the pteridophyta were 26 taxa including Osmunda japonica, Polystichum braunii, Onoclea orientalis and so forth. The naturalized plants were 35 taxa including Fallopia dumetorum, Conyza canadensis, Xanthium strumarium and so forth, the invasive alien plants were 3 taxa including Ambrosia artemisiifolia, Aster pilosus and Eupatorium rugosum. In the results of analysing the ecological index of plant in whole temple forests, RI(Rare Index) was 1.7%, 2.1% of EI(Endemic Index), 9.5% of SI(Specific Index), 1.2 of PI(Pteridophyta Index) and 6.5% of NI(Naturalized Index) in narrow sense. In broad sense, FI(Flora Index) was 11.0%, 1.5% of RI, 3.4% of EI, 4.8% of SI, 10.1% of PI, 10.9% of UI(Urbanized Index) and 25.0% of DI(Disturbed Index). The FI of the Daeseungsa was the highest among the three temple forests. In narrow sense, the RI, SI, NI and DI of the Beopheungsa was high, the seongjusa was higher the EI and SI. In broad sense, the RI and SI of the Beopheungsa, the EI, SI and PI of the Seongjusa, the UI is high in the Daeseungsa. In future, if we will analyze ecological index of plant in other temple forests, we will offer the help to establishing the plan of conservation and restoration on ecosystem in whole temple forests.Environmental Specimen Banks (ESBs) are playing pivotal role in monitoring the effect of environmental pollution on the ecosystem based on the retrospective analysis of the representative samples collected regularly and stored in cryogenic condition.

The Accuracy of Echocardiography and ECG in the Left Ventricular Hypertrophy (좌심실비대 진단에서 심장초음파와 심전도검사의 정확성)

  • Yang, SungHee;Lee, Jin-Soo;Kim, Changsoo
    • The Journal of the Korea Contents Association
    • /
    • v.16 no.2
    • /
    • pp.666-672
    • /
    • 2016
  • We extracted 50 LVH patients out of 30'~80's who performing ECG and echocardiography examination. We used Devereux's theory to examinate LVH with echocardiography and used Sokolow-Lyon's theory to examinate LVH with ECG. We used regression and correlation analysis by SPSS, used ROC curve analysis to decide predominance of two ways of .Age, BMI, SBP and DBP whice are the danger factors of LVH and standard value of LVH diagnosis examination seems correlated. Out of 50 LVH patients, 50 patients were diagnosed LVH by echcardiography examination and only 21 patients were diagnosed LVH by ECG examination. Also echocardiography was AUC 99%, sensitivity 96%, singularity 95%, accuracy 95.5%. And ECG was AUC 76%, sensitivity 62%, singularity 76%, accuracy 68%.By comparing accuracy between echocardiography and ECG in diagnosing LVH, we could tell echocardiography was examination with higher accuracy. Therefore, if one was diagnosed with summit on 1st examination with ECG, considering age, body mass index, systolic blood pressure and dilator blood pressure, should offer echocardiography examination.

A Study on the Determination and Characteristics of Stress Intensity Factors and Stress Singularities for V-notched Cracks in Dissimilar Materials (이종재료간 V-노치균열의 응력특이성과 응력강도계수의 특성 및 결정에 관한 연구)

  • 조상봉;윤성관
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.10
    • /
    • pp.1890-1899
    • /
    • 1992
  • In bonded structures, there are V-notched cracks in dissimilar materials and the stress concentration of these V-notched cracks causes to occur interface cracks in dissimilar materials Therefore the strength evaluation of V-notched cracks in dissimliar materials seems to be important. The stress fields of a V-notched cracks is known as .sigma.$_{ij}$ .var. K $r_{p-1}$,where K is the stress intensity factor and p-1 is the stress singularity. When the distance, r, approaches to 0 at the stress fields of V-notched cracks, the stresses become infinites by two more stress singularities of p-1 and p-1 is no more -0.5. Stress singularities and stress intensity factors for V-notched cracks in dissimilar materials are treated and discussed. The Newton-Raphson method which is an efficient numerical method for solving a non-linear equation is used for solving stress sigularities. And stress intensity factors are solved by the collocation method using the Newton-Raphson and least squares method. The effects of stress intensity factors and stress singularities on stress fields of V-notched cracks in dissimilar materials are studied by using photoelasic isochromatic frings patterns obtained from computer graphics.s.

Non-fragile robust guaranteed cost control for descriptor systems with parameter uncertainties (변수 불확실성 특이시스템의 비약성 강인 보장비용 제어)

  • Kim, Jong-Hae
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.44 no.1
    • /
    • pp.59-66
    • /
    • 2007
  • In this paper, we consider the non-fragile robust guaranteed cost state feedback controllers design method for descriptor systems with parameter uncertainties and static state feedback controller with multiplicative uncertainty. The sufficient condition of controller existence, the design method of non-fragile robust guaranteed cost controller, the measure of non-fragility in controller, the upper bound of guaranteed cost performance measure to minimize the guaranteed cost are presented via LMI(linear matrix inequality) technique. Also, the sufficient condition can be rewritten as LMI form in terms of transformed variables through singular value decomposition, some changes of variables, and Schur complements. Therefore, the obtained non-fragile robust guaranteed cost controller satisfies the asymptotic stability and minimizes the guaranteed cost for the closed loop descriptor systems with parameter uncertainties and controller fragility. Finally, a numerical example is given to illustrate the design method.