• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.617-624
• /
• 2009

In this paper, an electromagnetic analysis methodology using reaction theorem based on reciprocity theorem is presented for the aspheric ogival radome applied to a missile and/or airborne radar. The presented analysis methodology is verified using actual measured data. The type of antenna assumed to develope the methodology is a waveguide slot array antenna, and has the structure of 2 axes monopulse of "X" type. The shape of radome is assumed as Von Karman and the ratio of length to base diameter(L/D) is assumed to be 2:1. The electrical characteristics of the radome are measured using radome measurement system and the results are compared to the values estimated using the presented analysis methodology. It is found that the comparison shows good agreement. It is expected that the presented methodology can be applied for the development of missile and airborne radome.

• Journal of Mushroom
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2011

Dahyang, a CNARES's newly bred cultivar, is a CM061202 strain isolated and selected from 161 single-spores of brown button mushroom. It was selected as a new cultivar after comparison of yield, mycelial growth and quality with No. 705. Mycelial growth of Dahyang on compost extract mushroom complete medium at $25^{\circ}C$ for 15 days was 63mm when it was compared with that of No. 705 with 38mm. The cultivation temperature of Dahyang was 15 to $19^{\circ}C$ which was $2^{\circ}C$ higher than that of No. 705 with 15 to $19^{\circ}C$ cultivated on rice straw bed. The color of pileus of Dahyang was brown. Pinhead producing period was 30 days which is 1 day late than that of No. 705 with 29 days. Dahyang yielded 37% more with $49.1kg/3.3m^2$ than that of No. 705 with $35.8kg/3.3m^2$, respectively. The weight was 16.0g which was heavier than 14.0g of No. 705. The thickness and diameter were also more than those of No. 705. The stipe was shorter and thicker than that of No. 705. Also physical characteristics such as hardness and elasticity were better than that of No. 705.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.386-386
• /
• 2011

탄소나노튜브는 큰 길이 대 직경 비와 뛰어난 전기적 특성으로 인해 차세대 전계 방출 소자로 주목 받고 있다. 실질적인 전계방출 디스플레이로의 응용을 위한 대면적 제작과 유리 기판 사용을 위해 이용되었던 페이스트(paste)법은 높은 전기장 하에서 장시간 전계방출시 탄소나노튜브 전계방출원과 페이스트(paste)간의 낮은 접착력 때문에 발생하는 탄소나노튜브의 탈루현상(omission)과 유기물질(organic paste)에서 발생하는 탈기체(out-gassing) 문제점이 있었다. 최근 이런 문제점을 개선하기 위해 유기물질(organic paste)를 대체하여 금속바인더(metal binder) 물질을 사용한 결과들이 보고되고 있다. 본 연구에서는 유리기판 위에 제작된 탄소나노튜브 전계방출원의 수명 향상을 위하여 금속바인더와 후속 열처리법의 변화에 따른 전계방출 안정성을 분석하였다. 금속바인더는 접합층/ 접착층(soldering layer/ adhesive layer)으로 구성되어 있으며, 일반적인 소다석회유리(soda-lime glass)에 스퍼터(DC magnetron sputtering system)를 이용하여 증착하였다. 접착층은 유리기판과 접합층의 접착력 향상을 위해 사용되며, 접합층은 기판과 탄소나노튜브 전계방출원을 접합하는 역할과 전계방출 측정시 전극이 되기 때문에 우수한 전기 전도성과 내산화성을 필요로 한다. 본 실험에서는 일반적으로 유리기판과 접착력이 좋다고 알려진 Cr, Ti, Ni, Mo을 접착층으로 사용하였으며, 접합성과 전기전도성, 내산화성이 뛰어난 귀금속 계열의 금속을 접합층으로 사용하였다. 탄소나노튜브를 1,2-디클로로에탄(1,2-dichloroethane, DCE)에 분산시킨 용액을 스프레이방법을 이용하여 증착시켰으며, 후속 열처리 방법을 통하여 접합층과 결합시켰다. 금속바인더와 후속 열처리법의 변화에 따른 접착력과 표면형상(morphology)의 변화를 주사전자현미경(scanning electron microscopy)를 이용하여 분석하였으며, 다이오드 타입에 디씨 바이어스(DC bias)를 사용하여 전계방출특성을 측정하였다[1,2].

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.168-172
• /
• 2022

This study was conducted to investigate the optimum supplementation ratio when replacing cotton seed meal with rapeseed meal for cultivating oyster mushrooms. The chemical properties among the treatments were pH 4.5~4.7, total carbon content was 46.3~46.5%, total nitrogen content was 1.6~1.7%, and carbon-nitrogen ratio was 27.0~27.8. These did not differ significantly from the control. Mycelial growth was 85.1 mm (Heuktari), and 72.8 mm (Suhan-1Ho) in medium containing 5% rapeseed meal, with no significant difference in mycelial density between cultivars. Fruiting body characteristics are as follows: In 'Heuktari', the color of the pileus was darker than control with an L value of 32.5, and pileus thickness and diameter were 3.2 mm and 27.6 mm, respectively. Stipe length and diameter were 86.0 mm and 9.1 mm, respectively. Valid stipe number per bottle (1,100 cc) was 25.9, and a yield of 189.7 g/1,100 cc was recorded in mixed medium containing 5% rapeseed meal (higher than control). In mixed medium containing 10% rapeseed meal, the yield was 184.5 g/1,100 cc (comparable to control). In 'Suhan-1Ho', supplemented with 5% rapeseed meal, pileus color was darker than control color, with an L value of 28.8. Pileus thickness was 4.5 mm. Stipe diameter was 12.3 mm (higher than control), and yield was 145.5 g/1,100 cc (comparable to control).

• Composites Research
• /
• v.26 no.3
• /
• pp.147-154
• /
• 2013

Nanocarbons such as carbon nanotubes (CNT) and graphene are considered to be ideal fillers for polymer composites, because of their outstanding mechanical properties and high length-to-diameter ratio. There has been much effort to realize the implementation of their full potential, but a large number of unsolved problems still must be challenged, for example, effective processing for fabrication. This review deals with the progress that has already been made in the area of nanocarbon polymer composites using CNT and graphene. Mechanical reinforcement of various nanocarbon polymer composites is analyzed and compared, and future perspectives in research and development that need to be done are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2016

The effect of the migration of nanoparticles near the wall of a channel on the convective heat transfer in a laminar flow of $SiO_2$ nanoparticle suspensions (nanofluids) under constant wall heat flux boundary conditions was numerically and experimentally investigated in this study. The dynamic thermal conductivity of the aqueous $SiO_2$ nanofluids was measured using T-type thermocouples attached to the outer surface of a stainless steel circular tube (with a length of 1 m and diameter of 1.75 mm). The nanofluids used in this study were synthesized by dispersing $SiO_2$ spherical nanoparticles with a diameter of 24 nm in de-ionized water (DIW). The enhancement of the thermal conductivity of the nanofluids (e.g., an increase of up to 7.9 %) was demonstrated by comparing the temperature profiles in the flow of the nanofluids with that in the flow of the basefluids (i.e., DIW). However, this trend was not demonstrated in the computational analysis, because the numerical models were based on continuum assumptions and flow features involving nanoparticles in a stable colloidal solution. Thus, to explore the non-continuum effects, such as the modification of the morphology caused by nanoparticle-wall interactions on the heat exchanging surfaces (e.g., the isolated and dispersed precipitation of the nanoparticles), additional experiments were performed using DIW right after the measurements using the nanofluids.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.103-116
• /
• 2014

This paper presents the results of a numerical investigation on the load carrying capacity and consolidation behavior of suction piles. Three dimensional numerical models which reflect realistic ground conditions and installation procedures including the ground-suction pile interface were adopted to conduct a parametric study on variables such as the length-diameter ratio and the loading configurations, i.e, vertical, horizontal, and combined loads. The results indicated that the load carrying capacity of a suction pile can only be realistically obtained when the interface behavior between the suction pile and the ground is correctly modeled. Also carried out was the stress-pore pressure coupled analysis to investigate the consolidation behavior of the suction pile after the application of a vertical loading. Based on the results, failure envelops and associated equations were developed, which can be used to estimate load carrying capacity of suction piles installed in similar conditions considered in this study. The results of consolidation analysis based on the stress-pore pressure coupled analysis indicate that no significant excess pore pressure and associated consolidation settlement occur for the loading configuration considered in part due to the load transfer mechanism of the suction pile.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.58-62
• /
• 2008

'Miso', a new variety of oyster mushroom was developed for the bottle culture at the Chungnam Agricultural Research & Extension Services. Its mycelium grew rapidly with $8.4{\sim}8.6\;mm/day $ at $25{\sim}28^{\circ}C$ on PDA medium. The optimum pH of the mycelial growth was pH 5.0. It took 24 days for the primitive primordium formation after inoculation on pine sawdust media mixed with 20% wheat bran. Fruiting body color was white, and the shape of pileus was convex-umbonate. In the bottle culture, the yield was 115.7 g per 850 ml bottle. Stipe length was about 54 mm, the number of stipe per bottle was 18.1, the size of pileus was 28 mm, and gill was crowded. The moisture content of 'Miso' was lower than that of Jangan No.5 and Wonhyeong No.1, and contents of protein, ash and sugar of 'Miso' were higher than those of other varieties, and tannin acid content of 'Miso' was lower than that of others. On the basis of AFLP analysis, the 'Miso' was distinct not only from Wonhyeong No.1, but also from their closest relative, oyster mushrooms.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.190-194
• /
• 2017

Oyster mushrooms are one of the most popular edible mushrooms in Korea. The 'Santari' cultivar bred in this study, which belongs to the species Pleurotus pulmonarius, is a new oyster mushroom cultivar for bottle culture. It was bred by mating monokaryons isolated from 'GMPO20404' and 'Hosan'. The optimum temperature for 'Santari' mycelial growth was $26-29^{\circ}C$ on PDA medium, and the temperatures for primordium formation and for growth of the fruit body on sawdust medium were $22^{\circ}C$ and $20^{\circ}C$, respectively. It took 34 days to complete the spawn run, 3 days to form primordia, and 3 days to finish fruit body growth in the bottle culture. The fruit body pilei were round in shape and brownish, whereas the stipes were long, thick, and white. The yield per bottle of 'Santari' was 172 g/1,100 mL, which was 43% higher than that of the reference cultivar ('Hosan'). The springiness, cohesiveness, gumminess, and brittleness of the stipe tissue were 87%, 82%, 193 g, and 16 kg, respectively. These physical property values of 'Santari' were lower than those of the control cultivar, except for the cohesiveness.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.211-216
• /
• 2017

This study aims to reduce the production cost of mushrooms and therefore boost the income of mushroom producers. The addition of a 10% concentration of herb medicine refuse was adequate for promoting mycelium growth in Flammulina velutipes. A moisture content of 60% in the culture medium was adequate for promoting hyphal growth. The optimum temperature and humidity were $16^{\circ}C$ and 70%-85%, respectively. The average yield of Flammulina velutipes fruting body per 1,100 ml bottle was 275-282 g, which is similar to that of the control. The outbreak of diseases such as mildew and bacterial blotch in mushroom was never observed in the bottle treated with herb medicine refuse. Fewer deformed and second-class quality mushrooms were observed than in the control group. Deviation reduced, and mushroom growth was observed to be significantly uniform. The winter mushroom had a white fruiting body with a hemispherical shape. The diameter of the mushroom cap was 9.2-9.3 mm, stipe length was 12.7-12.8 cm, and thickness was 3.3-3.4 mm; these were almost the same as those in the control group. The partial hardness of winter mushrooms in both the experimental and the control groups showed that the stipe ($54.6-57.3g/cm^2$) is a little harder than the mushroom cap ($46.8-47.6g/cm^2$). The calories and nutrients per 100 g of mushrooms in the control and samples were similar to each other.