• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.197-204
• /
• 2010

This paper proposes a new body-effect compensated switch configuration for low voltage and low distortion switched-capacitor (SC) applications. The proposed circuit allows rail-to-rail switching operation for low voltage SC circuits and has better total harmonic distortion than the conventional bootstrapped circuit by 19 dB. A 2-1 cascaded sigma-delta modulator is provided for performing the high-resolution analog-to-digital conversion on audio codec in a communication transceiver. An experimental prototype for a single-stage folded-cascode operational amplifier (opamp) and a 2-1 cascaded sigma-delta modulator has been implemented m a 0.25 micron double-poly, triple-metal standard CMOS process with 2.7 V of supply voltage. The 1% settling time of the opamp is measured to be 560 ns with load capacitance of 16 pF. The experimental testing of the sigma-delta modulator with bit-stream inspection and analog spectrum analyzing plot is performed. The die size is $1.9{\times}1.5\;mm$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.179-189
• /
• 2008

The performance of Lean NOx Trap (LNT) based on the catalysts of Pt/K/Ba/$\gamma-Al_2O_3$ with proprietary washcoat formulation is studied using a bench flow reactor system. To investigate the effect of temperature and gas hourly space velocity (GHSV) on the nitrogen oxides (NOx) trapping capacity as well as NOx breakthrough time and final ratio of $NO_2$ to NO of LNT, series of adsorption isotherms are carried out with simulated exhaust gases of the lean burn engines. Since typical operation of LNT requires periodic regeneration with a short rich excursion, where the stored or trapped NOx is released and subsequently reduced to $N_2$, the effect of the duration of lean and rich phase and type of reductants on the NOx conversion is investigated. NOx storage capacity and breakthrough time obtained from adsorption isotherms shows a volcano-type dependence on the temperature with a maximum NOx storage capacity occurring $350^{\circ}C$ and with a maximum breakthrough time occurring $400^{\circ}C$ at all GHSVs investigated in this study. Also, maximum ratio of $NO_2$ to NO is obtained at $400^{\circ}C$ with a GHSV of $75,000\;hr^{-1}$ Lean/rich cycle of 100 s lean and 5 s rich used with a concentration of 1.33% of $H_2$ and 4% of CO in the rich phase is found to be optimum at operating temperature of $350^{\circ}C$ and a GHSV of $50,000\;hr^{-1}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1718-1724
• /
• 2017

Recently, Smart plugs for real time monitoring of household appliances based on IoT(Internet of Things) have been activated. Through this, consumers are able to save energy by monitoring real-time energy consumption at all times, and reduce power consumption through alarm function based on consumer setting. In this paper, we measure the alternating current from a wall power outlet for real-time monitoring. At this time, the current pattern for each household appliance was classified and it was experimented with deep learning to determine which product works. As a result, we used a cross validation method and a bootstrap verification method in order to the classification performance according to the type of appliances. Also, it is confirmed that the cost function and the learning success rate are the same as the train data and test data.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.517-527
• /
• 2021

This paper presents the phase-shift full-bridge DC-DC converter using the one-chip micom. The proposed converter primary is the full-bridge power topology that operates with the unipolar pulse-width modulation (PWM) by the phase-shift method, and the secondary is the full-bridge full-wave rectifier composed of four diodes. The control of proposed converter is performed by the one-chip micom and its MOSFET switches are driven by the bootstrap circuit. Thus the total system of proposed converter is simple. The proposed converter achieves high-efficiency using the resonant circuit and blocking capacitor. In this paper, first, the power-circuit operation of proposed converter is explained according to each operation mode. And the power-circuit design method of proposed converter is shown, and the software control algorithm on the micom and the feedback and switch drive circuits operating the proposed converter are described, briefly. Then, the operation characteristics of proposed converter are validated through the experimental results of a designed and implemented prototype converter by the shown design and implementation method in this paper. The highest efficiency in the results was about 92%.

• Review of KIISC
• /
• v.33 no.4
• /
• pp.23-29
• /
• 2023

대부분의 임베디드 시스템은 기계장치와 전자기기 장치가 함께 작동되는 물리 장치로써, 이기종 네트워크, 복잡한 보안체계 등을 고려하여 가상화 기반 사이버훈련 환경이 구성되어야 한다. 또한, 차량을 대상으로 물리적인 실험환경에서 모의침투 등 사이버훈련을 수행한다는 것은 교통사고를 비롯한 안전사고 발생에 있어 위험이 존재한다. 본 논문에서는 가상 개발환경에서의 공격 기반 차량용 사이버훈련 프레임워크를 제안하고자 한다. 먼저, 공격 기반 차량용 사이버훈련 프레임워크의 작동은 자동 활성화되는 가상의 CAN 네트워크 인터페이스로 시작된다. 가상의 CAN 네트워크 인터페이스는 가상 머신에서 간단한 부트스트랩 명령어 실행을 통해 파이썬 패키지와 Ubuntu 서비스 목록 설치 명령이 자동으로 실행되면서 설치된다. 이후 내부 네트워크 시뮬레이터와 공격모듈과 관련된 UI가 자동으로 Ubuntu Systemd에 의해 백그라운드에서 실행되어 시작과 동시에 준비 상태를 유지하게 된다. 사이버훈련 UI 내 공격 모듈은 사용자에 의한 공격 선택 및 파라미터 셋팅 이후 차량의 이상 상태를 사이버훈련 UI에 다시 출력되게 된다. 본 논문에서 제안하는 가상 개발환경 기반의 차량용 사이버훈련 프레임워크는 자율주행 차량 사고의 위험이나 다른 특수한 제약 없이 사용자의 학습 경험을 확장시킬 수 있다. 또한, 기존의 가상화 기반 사이버훈련 교육 콘텐츠와는 달리 일반 사용자들이 접근하기 쉬운 형태로 확장 개발이 가능하다.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.129-140
• /
• 2007

CFC(CFC-12, CFC-11 and CFC-113) analytical system for air and water was constructed using a customized purge and trap extraction device and a gas chromatograph with an electron capture detector. Sampling methods of air and water for CFCs were also established. The analytical system was experimentally optimized to result in reproducibilities of triplicates less than 2% for current air samples and less than 5% for groundwater samples with CFC-12 concentration of 160 to 180 pg/kg, and verified with respect to the CFC system in USGS, which showed analytical results were in agreement within 10%. CFCs in air were monitored at three sites over 19-month period in the central part of South Korea, and the result indicates no significant local sources of CFCs in those areas. For groundwater in Jeju Island, CFCs were measured over a year with a two-month interval. The time-series data showed seasonal fluctuations which could be interpreted by the effect of recharge pulse derived from large amount of rainfall during monsoon period with a few month delay, which indicates high permeability of basaltic rocks in Jeju Island.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.445-460
• /
• 2017

This study was carried out for three years from 2013 to 2015 to investigate the actual condition of pest control of domestic persimmon organically cultivated farmers, to select environment - friendly pest control materials for major pests, and to conduct field test of established control system. The main cultivated cultivar of the reader farmer of organic cultivation was "Buyou" and sprayed organic agricultural material 9~17 times per year for pest control. The most harmful pests were anthracnose, bugs, persimmon fruit worm, and scales, etc. The control materials used were organic lime sulfur mixture, red clay sulfur, emulsifier, bordeaux solution, and self-made plant extracts using garlic, ginkgo nut and pine tree. The effective materials for controlling anthrax were lime sulfur mixture and red clay sulfur. Garlic oil + citronella emulsion, shrubby sophora seed extract + tea extract was effective to control Riptortus clavatus and Euproctis subflava. When installed 60 ea per 10a of mating disruption trap in a sweet orchard, the fruit setting rate was improved by 30%. The results of field test of control system to control 10 times a year in organically grown persimmons were able to harvest fruit of 70.7%. However, since any kinds of pesticides can not be sprayed during the harvest season in September and October, the damaged by bugs did not decreased, and further research is needed.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.281-295
• /
• 2010

A new, automated apparatus is proposed for calculating the Soil-Water Characteristic Curve (SWCC), representing a simple and easily applied testing device for continuous measurements of the volumetric water content and suction of unsaturated soils. The use of this apparatus helps to avoid the errors that arise when performing experiments. Consequently, the apparatus provides greater accuracy in calculating the SWCC of unsaturated soils. The apparatus is composed of a pressure panel, flow cell, water reservoir, air bubble trap, balance, sample-preparation accessories, and measurement system, among other components. The air pressure can attain 300 kPa, and a general test can be completed in a short time. The apparatus can simply control the drying process and wetting process. The changes in volumetric water content that occur during the drying and wetting processes are shown directly in the SWRC program, in real time. As a case study, we performed an SWCC test of Joomunjin sand (75% relative density) to measure matric suction and volumetric water content during both the drying and wetting processes. The test revealed hysteresis behavior, whereby the water content on the wetting curve is always lower than that on the drying curve for a specific matric suction, during the wetting and drying processes. Based on the test results, SWCCs were estimated using the Brooks and Corey, van Genuchten, and Fredlund and Xing models. The van Genuchten model performed best for the given soil conditions, as it yielded the highest coefficient of determination.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.10
• /
• pp.429-436
• /
• 2017

There is a growing tendency to outsource sensitive or important data in cloud computing recently. However, it is very important to protect the privacy of outsourced data. So far, a variety of secure and efficient multi-keyword search schemes have been proposed in cloud computing environment composed of a single data owner and multiple data users. Zhang et. al recently proposed a search protocol based on multi-keyword in cloud computing composed of multiple data owners and data users but their protocol has two problems. One is that the cloud server can illegally infer the relevance between data files by going through the keyword index and user's trapdoor, and the other is that the response for the user's request is delayed because the cloud server has to execute complicated operations as many times as the size of the keyword index. In this paper, we propose an improved multi-keyword based search protocol which protects the privacy of outsourced data under the assumption that the cloud server is completely unreliable. And our experiments show that the proposed protocol is more secure in terms of relevance inference between the data files and has higher efficiency in terms of processing time than Zhang's one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.223-228
• /
• 2019

This study analyzes the propagation of the path losses between Jeju-do and Jin-do transceivers located in the coastal areas of Korea using the Advanced Refractive Prediction System(AREPS) simulation software based on the actual coastal weather database. The simulated data is used to construct a duct map according to the altitude and thickness of the trap. The duct map is then divided into several regions depending on the altitude parameters of Tx and Rx, which can be used to effectively estimate the abnormal wave propagation characteristics due to duct occurrence in the Jeju-do coastal area. To validate the proposed duct map, two representative atmospheric index samples of the weather database in May 2018 are selected, and the simulated path losses using these atmospheric indices are compared with the measured data. The simulated path losses for abnormal conditions at the Rx point at Jeju-do are 167.7 dB and 192.3 dB, respectively, which are in good agreement with the measured data of 164.4 dB and 194.9 dB, respectively.