• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.499-509
• /
• 1997

During the process of oxide removal from work rolls in sheet metal manufacture, filamentary brushes frequently exhibit a bouncing or chatter behavior. The dynamics of this phenomenon is investigated through the development of expressions for the non-linear contact stiffness between the brush and the roll. With formulation of simple structural models, the time responses in the presence and absence of friction under random excitation are investigated. Possible solutions for the minimization or avoidance of this bouncing or chatter problem are also suggested.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.421-423
• /
• 2012

본 논문에서는 빠르게 회전하는 공에 대한 바운싱 모델을 제시한다. 제안하는 바운싱 모델은 충격량을 기반으로 공의 회전력, 지면의 탄성 및 마찰력을 고려한다. 제안된 모델의 정확도를 측정하기 위해 그린, 페어웨이 및 러프 지형에서 공의 궤적을 촬영하고, 영상으로부터 공의 실제 궤적을 추출하여 비교한다. 시뮬레이션 모델은 실제 궤적을 기반으로 튜닝함으로써 정확도를 향상시킨다. 본 바운싱 모델은 실감형 스포츠 게임에서 보다 사실감을 높일 수 있다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.60-66
• /
• 2002

본 연구는 진동형 구기자 수확기를 개발함에 있어서 탈과된 열매를 손상없이 집과하여 수확작업의 노동력 및 경제적 비용을 줄이고, 농산물 수확의 기계화를 활성화 시키는데 그 목적을 두었다. 생물학적, 재배학적, 그리고 환경적 요인들을 고려하여 탈과열매의 효과적인 집과를 위한 집과장치를 설계·개발하고, 성능시험을 실시하여 집과장치의 집과효율을 분석 하였으며, 그 결과는 다음과 같다. 1. 수확시작기의 주행시에는 집과안내장치가 구기자 나무 밑부분과 부딪침이 없고, 탈과작업시에는 구기자 나무 밑의 공간까지 집과기능을 갖도록, 4절 링크 시스템을 이용하여 집과 안내장치를 개폐식으로 설계제작하였다. 2. 개폐식으로 제작된 집과장치를 진동형 구기자 수확기 시작기에 장착하여 성능시험을 한 결과, 숙과의 수집율은 88∼96%로 나타났다. 3. 미수집율인 4∼12%는 개폐식 집과장치의 기능저하로 인하여 발생한 것이 아니고, 기계전후 방향의 열매의 튐 현상에 의한 것이었으며, 이 손실은 비산방지막 커튼의 설치로 보완되리라 사료되었다.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.128-133
• /
• 2012

The present study aims to examine the influence of flame spray distance on the thermal behavior of micro-metal particles and the morphological characteristics of $Ni_{20}Cr$ layers coated on the preheated SCM415 substrates by using the conventional flame spray system. Commercially available nickel-based $Ni_{20}Cr$ particles with a mean diameter of $45{\mu}m$ were used. In addition, CFD simulations using a commercial code (FLUENT ver. 6.3.26) were conducted to estimate temperature and velocity distributions of the continuous and discrete phases before impact on the substrate. From FE-SEM images of coated layers on the substrates, it was observed that as the spray distance decreased, the metal particle morphology showed splash-like patterns and such a short stretch shape, resulting from higher particle momentums and the impact of partially melted particles. Moreover, it was found that the spray distance should be considered as one of important parameters in controlling the porosity and the adhesion strength.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.214-219
• /
• 2013

This paper proposes the robust high-gain observer based SOC estimatro for uncertain RC model of Li-Ion batteries. In general, RC battery model has inevitable uncertainties and it cause some negative effect to estimate the accurate SOC of Li-Ion batteries. The proposed estimator overcomes such weakness with two techniques; high-gain observer design technique and sliding mode control technique. A high-gain observer provides the robustness against model uncertainties to the proposed estimator. A sliding mode control technique helps the proposed estimator by reducing the side effect of adopting a high-gain observer such as peaking phenomenon and perturbation. The performance of the proposed estimator is verified by some simulation.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.44-53
• /
• 2007

The purpose of this study is to identify the most efficient expression method by analyzing advertising expression method by 16 types of product in internet advertising. First of all, It made inquiries about expression method and attitude of internet advertising for this study and identified a conception, characteristics, and types of internet advertising through literature reviews about internet advertising. This study offered expression the korean alphabet, hangout about banners ads, sponsorship ads, interstitial ads and pop-up ads. This study analyzed advertising expression, advertising effectiveness and advertising attitude by 16 types of product in internet advertising. In conclusion, the marketers of internet advertising have to effort to make internet advertisements that suit their advertising purpose by using the right expression method of internet advertising because they know internet advertising are quite different the expression method, advertising effectiveness, and advertising attitude. And they have to convert negative attitude or medium size attitude of internet advertising into positive attitude in the future.

• Bulletin of Food Technology
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2012

한국 식품화의 위상은 구이류 및 전골류 조리시 발생하는 냄새, 연기, 기름 튐 등의 문제로 인해 낮게 평가 되고 있는 실정이다. 현재 사용하고 있는 불판 및 가열원료가 다양하여 맛의 균일화가 어렵고 사용 후 세척처리가 번거로운데다 환경오염까지 발생시킨다. 구이 및 전골에 소비되는 에너지가 잔량을 모두 섭취할 동안 연속적으로 공급하므로 에너지 소비 및 내부 공기조건이 열악한데 반해 연기 및 냄새와 관련된 제품의 개발과 생산에 참여하는 업체는 증가하고 있다. 하지만 기술력 및 자본력이 미미한 수준에 있어 많은 기술적 측면의 보완이 요구된다. 또 소스, 양념, 부재료 등의 가공처리를 외국인의 식문화에 적합하도록 맛, 향, 관능의 관점에서 규격화 및 현지화도 요구되며, 공급되는 원재료의 고기종류, 규격, 등급 등의 조건들이 국내 관능뿐만 아니라 외국인의 관능적인 관점에서 표준화가 시급하다. 주한 외국인을 대상으로 한 설문에서 59%가 한국음식의 세계화가 가능하고 89.9%가 한식메뉴를 소개할 의사가 있는 것으로 조사되었다. 이는 외국인 소비자의 인지도에서 불고기와 갈비 등의 구이류가 다른 한식보다 선호도가 증가하는 것이기 때문인 것으로 분석된다. 2009년 농림수산식품부가 '한식 세계화 프로젝트'를 선포하여 1만여 곳의 해외식당을 2017년까지 4만 곳으로 증가할 예정이다. 따라서 한식문화의 표준화를 위한 용어 재료 기구 단위 등의 표준화 기반개발을 바탕으로 조리 및 식문화의 표준화가 요구되고 있다. 우리나라는 구이전문점들이 일반주거 및 아파트 단지에 위치하고 있어 연기와 냄새에 대한 민원 및 분쟁이 발생되고 있다. 이에 집진, 제연 설비의 설치비용이 많이 소요되고 있으며 대부분의 구이설비가 수입제품으로 규모가 매우 크다. 일본의 경우 2002년도부터 음식점에서 발생하는 연기에 관한 규제를 법제화하였다. 위의 기술적, 경제 산업적, 사회 문화적 측면의 필요성을 바탕으로 본 연구는 연기 음식 냄새 저감 성능이 뛰어난 친환경 저에너지의 가열조리 기구 개발 및 국내외 현장적용 산업화 모델 구축을 통해 한식당 시설 개선 및 고급화를 유도하고 세계시장에서의 한식문화 경쟁력을 확보코자 한식문화 경쟁력 확보와 경제, 문화, 산업적 성공 비즈니스 모델을 제시하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.313-314
• /
• 2022

The intelligent maritime traffic information service provides a service to prevent collisions and stranding of ships based on the location information of ships periodically collected from ship equipment such as LTE-Maritime transceivers and AIS installed on ships. provided in real time. However, the above service may reduce the reliability of ship location information because GPS location information for measuring the ship's location may be cut off during transmission through LTE-Maritime or AIS networks, or phenomena such as location jumps and delays may occur. This study aims to estimate reliable position information to some extent even in an abnormal section through ship position prediction based on the existing received position information using the Kalman filter, which is an optimal estimation filter based on probability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2303-2315
• /
• 2013

In general, the waterway was installed for drain water from steep slope and waterway cover was set up to prevent overflow and water separation at berm of waterway. In this study, hydraulic experiment was conducted to analyze the flow characteristics and enact standard design criteria of the waterway. Hydraulic experimental apparatus which can change the slope of waterway and the length of berm were installed to analyze of flow characteristics at the waterway. The slopes of waterway were $40^{\circ}$, $50^{\circ}$, $60^{\circ}$, and $70^{\circ}$ and the range of discharge were 1.0~5.6 ${\ell}/s$. The flow in berm was distinguished two types such as hydraulic jump and splash flow. These kinds of flows depended on the rates of discharge in waterway. When inlet discharge was below 1.1~2.0 ${\ell}/s$, the separation phenomenon of water was generated at upper and lower portion in berm by the splash flow. The scattering range of water particles and length of water separation was measured depending on the slope of waterway. The start point of scattering was about 20 cm(1.3B) from the place connected upper waterway with brem and the length of water separation was till 210 cm(3.5B) from the place connected lower waterway with brem. Therefore, the waterway cover needed to install from starting of berm to 1B and from the lower part of berm to 3.5B.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.179-186
• /
• 2006

Effective interception area of street grate inlets was decreased by clogging with trash, debris, and sand. It also decreased the interception capability of grate inlets and increased the inundation area in street. Therefore, it is necessary to analyze the clogging characteristics and interception capability change by clogging for appropriate design and management of grate inlets. Hydraulic experimental apparatus which can be changed the gutter transverse slopes, longitudinal slopes of street and clogging condition of grate inlet ($40{\times}50cm$) was installed for this study. 81 total experiments were conducted with 8 different clogging condition. The interception capacities of grate inlets clogged curb direction are smaller than those of clogged flow direction. As the longitudinal slopes of street increase, the interception capacity of grate inlet decreases due to splash-over phenomena. This is also observed at grate inlets which has no clogging condition. In general, 50% of clogging factor was selected in design of grate inlet in foreign country. The clogging factor for same clogging condition are suggested 0.25~0.65 in domestic urban area.