• Journal of the Korean Statistical Society
• /
• v.5 no.2
• /
• pp.129-142
• /
• 1976

본논문에서는 물가변동을 미래에 투영하여 예측한다기 보다는 물가변동률 결정을 구조적으로 파악하여 보기로 하되, 고전적인 수량방정식의 입장에서 통화와 소득의 영향력을 시차분포로서 추정하는 것을 일차적인 목적으로 하고 있다. 또한 물가변동에 대한 기대형성을 오차수정기대(error-learning expection) 또는 적응기대(adaptive expection) 형태로 설정하여 일종의 마아코프 일단적 확률과정을 만들어 그 영향력을 추정하였다. 추정 결과, 통화변수의 경우에 있었던 하나의 예외를 제외하고는 모두 일반적으로 기대되고 있는 형태로서 얻어졌다. 통화변수의 경우에도 예외로서 얻어진 결과는 그 나름대로 경제적인 해석이 가능하였으며 또한 전례가 없었던 현상이 아니므로 구태여 예외로서 보다는 일반적인 현상으로 합리화될 수 있었다. 흔히 한 물가를 다른 물가로 설명하려는 순환론적인 연구접근방법을 가능한 한 배제하고 확률적인 요인에 의한 설명을 본연구에서는 시도하였다. 따라서 제변수의 공동형세에 따르는 허위상관을 제거하기 위하여 계절변동이 조정되지 않은 대전기 변동율을 기초 자료를 사용하였다. 앞으로 연구내용의 본질적인 개선을 위하여서는 본연구를 출발점으로 하여 추정모형의 설정에 있어서나 추정방법의 개발, 추정량의 평가 등에 있어서 지속적인 연구노력이 요구된다.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.163-170
• /
• 2009

We developed a compact micro indentation testing device (designated SNUT) which is capable to measure Young's modulus of a sample using depth and applied load data during indentation. Performance of this device was evaluated using pure Ti, pure Ni, and die steel (SKD11). As a result of analysing the indentation test data, the frame compliance $C_f$ was found to influence mainly the modulus by 80% among several factors affecting accuracy of Young's modulus. Project area, which was determined by indirect indentation method, was modified using direct SEM observation. Finally, Young's modulus error was reduced to 5% after taking into consideration the frame compliance and modified projected area from 80% error without any these two correction factors. The performance of SNUT and MTS instruments was compared using same specimen (pure Ti).

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.116-120
• /
• 2009

원격탐사 기술은 사람이 직접 방문하여 조사하기 힘든 극지라든가 농업환경에 대한 자료 요구도가 높으면서도 직접 수집이 어려운 비접근 지역에 대한 정보를 추출하는데 유용한 관측수단이다. 본 연구는 MODIS(Moderate Resolution Imaging Spectroradiometer) 제공 산출물 중 16일 단위로 작성되는 NDVI(Normalized Difference Vegetation Index, MOD13)를 이용하여 북한의 벼 수량을 추정하는 것을 목적으로 하였고, 그 가능성과 한계에 대하여 알아보았다. 2000년부터 2008년까지 촬영된 MODIS MOD13 자료를 미국 NASA로부터 제공받아 좌표체계를 우리나라에 맞게 투영하고 NDVI를 추출하여 자료분석에 사용하였다. 통계청에서 발표한 벼 수량 및 생산량 통계자료를 이용하였다. 농촌진흥청 국립농업과학원에서 작성한 북한의 토지피복분류도를 이용하여 서해안 평야지대에 위치한 논을 위도별로 네군데 정하여 관심지역(area of interest)으로 설정하였다. 이 관심지역에 대한 시계열 값을 추출하여 연중 연간 변화를 분석하고 2000년부터 2007년까지 수잉기의 NDVI 값을 이용하여 수량에 대한 상관계수(r)는 $0.77^*$로 5%에서 유의하여 NDVI 값에 따라 벼 수량에 큰 영향을 주는 것으로 나타났다. 수잉기의 NDVI 값과 벼 수량에 대해 회귀분석한 결과($R^2=0.591^*$), NDVI에 따른 벼 수량의 변이를 59.1% 설명할 수 있었다. 이와 같이 회귀식을 이용하여 2008년 북한의 벼 수량은 약 2.80 ton/ha로 추정되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.176-184
• /
• 2005

In this paper, we implemented an Elliptic Curve Cryptography(ECC) processor for Digital Transmission Contents Protection (DTCP), which is a standard for protecting various digital contents in the network. Unlikely to other applications, DTCP uses ECC algorithm which is defined over GF(p), where p is a 160-bit prime integer. The core arithmetic operation of ECC is a scalar multiplication, and it involves large amount of very long integer modular multiplications and additions. In this paper, the modular multiplier was designed using the well-known Montgomery algorithm which was implemented with CSA(Carry-save Adder) and 4-level CLA(Carry-lookahead Adder). Our new ECC processor has been synthesized using Samsung 0.18 m CMOS standard cell library, and the maximum operation frequency was estimated 98 MHz, with the size about 65,000 gates. The resulting performance was 29.6 kbps, that is, it took 5.4 msec to process a 160-bit data frame. We assure that this performance is enough to be used for digital signature, encryption and decryption, and key exchanges in real time environments.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.65-70
• /
• 2018

Computed tomography system is widely used on various fields because section image of an object can be acquired. During several step to obtain section image, artifacts by many error factors can be added on the image. Ring artifact induced by the CT system is examined in this study. A test phantom of $512{\times}512$ size was constructed numerically, and the ring artifact was investigated by the algebraic reconstruction technique. The computer program was realized using Visual C++ under the fan beam geometry with projections of 720 and detector pixel of 1,280. The generation of ring artifact was verified by applying different detection efficiency on detector pixels. The ring intensity became large as increasing the ring value, and the ring artifacts were strongly emphasized near the center of the reconstructed image. The ring artifact may be eliminated by tracking the position of ring artifact on the reconstructed image and by calibrating the detector pixel.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.70-81
• /
• 2001

This paper presents a 3D face modeling method using a CCD camera and a projector (LCD projector or Slide projector). The camera faces the human face and the projector casts white stripe patterns on the human face. The 3D shape of the face is extracted from spatial and temporal locations of the white stripe patterns on a series of image frames. The proposed method employs region segmentation and multi-beam techniques for efficient 3D modeling of hair region and faster 3D scanning respectively. In the proposed method, each image is segmented into face, hair, and shadow regions, which are independently processed to obtain the optimum results for each region. The multi-beam method， which uses a number of equally spaced stripe patterns, reduces the total number of image frames and consequently the overall data acquisition time. Light beam calibration is adopted for efficient light plane measurement, which is not influenced by the direction (vertical or horizontal) of the stripe patterns. Experimental results show that the proposed method provides a favorable 3D face modeling results, including the hair region.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.1-4
• /
• 2001

This study on leaching and adsorption in Korean pine (Pinus koraiensix) to precipitation was carried out to investigate the stemflow of Korean pine and artificial crown for the concentration of leaching and adsorption of Korean pine. For comparative, we made artificial crown with plastics. The size of artificial crown was made similar with projected area of Korean pine at Kyung Hee University experimental forest, Gwangiu-gun, Kyunggi-do. In case of the concentration of leaching, the cation of $K^{+}$ was increased in November, and during the period of research, the cation of $K^{+}$ was more leached than any other dissolved element. In case of the concentration of adsorption, the cation of $Ca^{2+}$ was increased in June, July and November, and the cation of $Mg^{2+}$ and $Al^{3+}$ were increased in November.ember.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.119-125
• /
• 2018

The purpose of this study is to analyze the 'Scenery of the Urban Residence' represented in Korean films of the liberation period. It is assumed that public films reflect the human activities, residential culture and cityscape of those days. For the analysis, a pool of 7 Korean films from 1946 till 1949 was constructed. In these films, the sceneries of the urban life were represented as the following: 1) The western-style architectural spaces, such as cultural residence and apartment were emphasized to reflect the longing and curiosity of the general public for modern culture and lifestyle. 2) The cityscape including a narrow alley, crossroads and modern buildings was intentionally represented to express visually the city of Seoul under the slow wave of modernization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3856-3863
• /
• 2012

A 3D reconstruction technique from stereo images that requires minimal intervention from the user has been developed. The reconstruction problem consists of three steps of estimating specific geometry groups. The first step is estimating the epipolar geometry that exists between the stereo image pairs which includes feature matching in both images. The second is estimating the affine geometry, a process to find a special plane in the projective space by means of vanishing points. The third step, which includes camera self-calibration, is obtaining a metric geometry from which a 3D model of the scene could be obtained. The major advantage of this method is that the stereo images do not need to be calibrated for reconstruction. The results of camera calibration and reconstruction have shown the possibility of obtaining a 3D model directly from features in the images.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.133-143
• /
• 1996

The constant modulus algorithm (CMA), one of the widely used blind equalization algorithms, equalizes channels using the second-order statistic of equalizer outputs. The performance of the CMA for multi-level signals such as the quadrature amplitude modulation (QAM) signal degrades because the CMA maps all signal power onto a single modulus. in this paper, to improve the equalization performance of a QAM system, we propose a shell partitioning method based on error magnitude. We assume the probability distribution of an equalizer output as Gaussian, and obtain decision boundaries by maximum likelihood estimation based on the fact that the distribution of the equalizer output power is noncentral $x^2$. The proposed CMA constructs a multi-moduli equlization system based on the fact that each shell separated by decision boundaries employs a single modulus. Computer simulation results for 32-QAM and 64-QAM show the effectiveness of the proposed algorithm.