• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.205-215
• /
• 2012

Metal ions, toxic or potentially toxic to biota and human beings, can be immobilized by sorption onto the mineral surfaces in soils and sediments. This article briefly explains theories regarding the chemical properties of mineral surfaces to sorb metal ions and processes of extended X-ray absorption fine structure (EXAFS) analysis for sorption study, and reviews atomic-scale findings on metal sorption on mineral surfaces. The theoretical understanding on the chemistry of mineral surfaces and metal sorption is fundamental to the proper analysis of the atomic-scale spectroscopy to determine the sorption phases. Atomic-scale findings on metal sorption phases discussed here include co-precipitation, ternary complexation, aging effects, and desorption possibilities, as well as outer-sphere complexation, inner-sphere complexation, and surface precipitation.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.402-410
• /
• 2003

When the bivalve fossil microstructure is observed on a thin section, the growth lines of the older specimens are mostly erased by calcite recrystallization while those of the younger are well preserved in detail. During the fossil diagenesis, the shells tend to darken gradually since the valve-forming component Ca$^{2+}$ is the replaced by the surrounding materials Fe$^{2+}$, Mg$^{2+}$, and Mn$^{2+}$. Therefore, the metallic ratio against Ca component in fossil was increased during diagenesis. The UV-Visible spectrophotometry analysis shows that the reflecting degree is low level in Cretaceous bivalve fossils in contrast to the Tertiary and Recent ones. This result suggests that the dark color in older bivalve fossils is affected by the replacement of the metal ions.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.85-98
• /
• 2008

Calc-silicate rock sheet occurs within the Precambrian metasedimentary rocks in Bonghwa area, Kyungsangbuk-do, Korea. The calc-silicate rock runs parallel to bedding plane with $14{\sim}18$ meters in width. Calcite, dolomite, serpentine and tremolite are occurred as major minerals and talc is occurred as a miner mineral. Serpentine mainly occurs in the upper part and tremolite occurs in lower part of calc-silicate rock sheet. Colors of calc-silicate rock change to deeper green with increasing amounts of serpentine mineral. XRD, FT-IR analyses indicates that serpentine mineral is antigorite. Platy structure of antigorite is well observed by SEM analysis. EPMA data indicates that chemical composition of antigorite is very close to ideal ($SiO_2$: 44.3 wt% and MgO: 40.8 wt%). The chemical formula of antigorite is calculated as $Mg_{2.82}Al_{0.04}Fe^{3+}_{0.04}Si_{2.05}O_5(OH)_4$. From careful study by comparing mineralogical analysis data and occurrence, calc-silicate rock sheet was formed by metamorphism of calcareous sedimentary rocks having different mineralogical and chemical compositions. It is considered that the host rock of serpentine enriched upper part was more Mg-rich rocks than the host rocks of tremolite enriched lower part.

• 한국해양학회지
• /
• v.23 no.3
• /
• pp.110-122
• /
• 1988

Between the Clarion and Clipperton fracture zones of the Northeastern Pacific, nodules and crusts were collected from abyssal plain and hills by the Korea Ocean Research and Development Institute in December, 1983 aboard the R/V KANA KEOKI of the Hawaii Institute of Geophysics. Mineralogical and geochemical data of bulk nodules are obtained and compared with analyses of other studies. Mechanisms of nodule formation are discussed based on these data. Generally, the nodules of the KONOD-1 site are composed of todorokite and ${\delta}-MnO_2$. The contents of Mn, Fe, Ni, and Cu of the bulk nodules are variable and the average contents of metals are slightly lower (Mn, 21.40%; Ni, 0.9%; Cu, 0.8%) than those of nodules from other abyssal plains between the Clarion and Clipperton fracture zones. High Mn/Fe (average 3.9; maximum 5.9) and Cu/Ni (average 0.8; maximum 1.0) ratios are similar to the nodules that were formed diagenetically in the northeast Pacific. The chemical characteristics of the KONOD-1 nodules reflect their sedimentary environments; nodules with higher diagenetic signatures occur in areas of thin Quaternary siliceous ooze, and nodules of lower diagenetic influence occur in topographically irregular abyssal hill areas.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.277-288
• /
• 1985

Mineral composition and grain size analyses of the sandstone from the Early Jurassic Daedong Group distributed in Mungyeong, Daecheon, Kimpo and Yeoncheon areas were made for the study of provenances and depositional environments. The most of the analyses are obtained from Mungyeong area, with some preliminarly works from Daecheon, Kimpo and Yeoncheon areas. All sandstones from the study area are characterized by high content of quartz ranging from 59.8 to 87.2 percent of total constituents. Many of quartz which has rounded dust ring seems to come from aeolian sediments. Content of feldspar is very low except Daecheon area where it ranges from 1.8 to 10.0 percent. Sandstones from Mungyeong, Kimpo and Yeoncheon areas are classified as quartz and quartzose arenite/wacke, while those from Daecheon area are classified as quartzose and lithic arenite/wacke. According to the character of the sandstones, provenance could be quartzose sandstone and quartzite. Results of grain size analysis of C-M and sorting versus skewness suggest that depositional environment seems to be fluvial, while log-probability curve pattern lacustrine environment. It is hard to derive a definite conclusion of sedimentary environment by the grain size analysis.

• The Korean Journal of Petroleum Geology
• /
• v.3 no.1 s.4
• /
• pp.28-39
• /
• 1995

The objective of this study is to investigate the origin of the dolomite in the Pungchon Formation of the Choseon Supergroup near Taebaeg City, Kangwondo, Korea. The Pungchon Formation is composed of limestone, dolomitic limestone, and dolomite with thin beds of flat pebble conglomerate (FPC) and mudrock. Texturally, the dolomite in the Pungchon Formation can be divided into four types; 1) coarse-sized, xenotopic dolomite in massive dolomite, 2) medium-siEed, idiotopic dolomite in flat pebble conglomerate, 3) xenotopic dolomite replacing ooids, algalnodules, and echinoderms, and 4) the dolomite in mottled fabric. The dolomite in mottled fabric can be subdivided into three types; a) coarse-sized, xenotopic saddle dolomite cement, b) medium-sized, idiotopic, cloudy-centered, clear-rimmed (CCCR) dolomite, and c) coarse-sized, idiotopic dolomite. The carbon isotopic composition of the Pungchon dolomite is in the range of $-2.8-1.4\%_{\circ}(PBD)$, suggesting that the carbon isotopic composition was buffered by the preexisting marine carbonates. Lighter oxygen isotopic values ($\delta^{18}O-15.7-8.7\%_{\circ}, PBD$) indicate that the Pungchon dolomite may have formed under high temperature in a burial diagenetic environment. The higher initial $^{87}Sr/^{86}Sr$ ratio of the Pungchon dolomite (0.7010-0.7161) than that of the coeval Cambrian seawater (0.7088-0.7092) indicates that dolomitizing fluids had been modified from the isotopic exchange with continental crust. Low Sr and Na contents(<200 ppm) of dolomite agree well with previously reported data for burial dolomite. Hifh Fe and Mn contents of the dolomite support the idea that the Pungchon dolomite may have formed in a deep burial diagenetic environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.5
• /
• pp.312-320
• /
• 2013

Particulates in drinking water distribution system (DWDS) are mostly influenced by internal corrosion of metal pipes and sediment in pipelines due to the solution of this effect is limited. The particle size, component and properties of compounds for particulates in distributed water are different and the difference of these characteristics will be occurred by the kind of facilities, pipe condition, external factors and supply system etc. In this study, conducting the investigation of water quality in DWDS researches with particulates in the water. Monitoring sites were each water supply reservoir and the end of water supply area in DWDS. To collect particulate material at each sampling site, $47{\phi}$ glass microfiber filter type GF/C was performed using a filtration. Substances that the effect of the turbidity in the water according to particulate suspended solids and inorganic materials is due to the increasing particulates in the end of DWDS were increased. The result of compounds analysis by using X-ray diffraction (XRD) were Goethite (${\alpha}$-FeOOH), Magnetite ($Fe_3O_4$) in the end of DWDS and Quartz ($SiO_2$), Yeelimite ($Ca_4Al_6O_{12}SO_4$) at the effluent of waterworks and reservoirs. There were differences the compounds and sediments in the releasing or remaining water distribution facilities.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.105-115
• /
• 2007

Data mining extracts interesting knowledge from a large database. Among numerous data mining techniques, research work is primarily concentrated on clustering and association rules. The clustering technique of the active research topics mainly deals with analyzing spatial and attribute data. And, the technique of association rules deals with identifying frequent patterns. There was an advanced apriori algorithm using an existing bit-clustering algorithm. In an effort to identify an alternative algorithm to improve apriori, we investigated FP-Growth and discussed the possibility of adopting bit-clustering as the alternative method to solve the problems with FP-Growth. FP-Growth using bit-clustering demonstrated better performance than the existing method. We used chess data in our experiments. Chess data were used in the pattern mining evaluation. We made a creation of FP-Tree with different minimum support values. In the case of high minimum support values, similar results that the existing techniques demonstrated were obtained. In other cases, however, the performance of the technique proposed in this paper showed better results in comparison with the existing technique. As a result, the technique proposed in this paper was considered to lead to higher performance. In addition, the method to apply bit-clustering to GML data was proposed.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.320-331
• /
• 1995

The closely spaced cores were analyzed to find detailed reconstruction of paleoenvironments and sealable changes along the Delaware Bay coast. Three areas, Kitts Hummock Beach mars, the St. Jones River marsh, and Bowers marsh near the St. Jones River's mouth, were chosen because these areas are compose of their own geomorphic characteristics and sea-level history. since significance of the stratigraphic correlations was to determine sedimentary fancies and paleoenvironments, multidisciplinary methods such as lithological description, grain-size analysis, organic/inorganic content, water content, mineral composition, botanical analysis, micropaleontological analysis, and /SUP 14/C datings were performed. Five major divisions of marsh environments were recognized in the stratigraphic sections: freshwater marsh, initialfreshwater marsh, slightly brackish marsh, brackish marsh, and salt marsh. Most of the lower part in the stratigraphic sections show freshwater marsh. On the top of this, either brackish marsh or tidal flat/tidal stream was recorded. The pro-Holocene sediments consist of sand, mud, and sandy mud, The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene sediments consist of sand, mud, and sandy mud. The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene surface within short distances permitted the concurrent development of variable environments such as freshwater marsh, brackish marsh or salt marsh at similar elevations. The freshwater marsh in this case was formed in the areas of isolation, so saline-water cannot encroach upon these areas. This complex development of paleoenvironments leads to a difficulty in stratigraphic correlation and interpretation of local relative sea-level changes. The deposition of subsurface sediments was affected by sediment supply, compaction, fluvial activity, biological competition, local tectonics and isostacy, climate and local relative sea-level changes. It was interpreted that the positions in the changes from freshwater environments to brackish environments or ice versa are the turning points of transgressions and regressions. Therefore, multiple transgressions and regressions were identified in the stratigraphic sections of the study area.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.287-302
• /
• 2017

The carbonate rocks of the Daegi Formation are composed of the limestone at the upper and lower zones, and the dolomite at the middle zone, in which the upper zone has higher CaO content than others. The colors of carbonate rock in the Daegi Formation can be divided into five types; white, light brown, light gray, gray, and dark gray. The white to light gray colored rocks correspond to the high purity limestone with 53.15 ~ 55.64 wt. % CaO, and the light brown colored rocks contain 20.71 ~ 21.67 wt. % MgO. The bleaching of carbonate rocks are not related to CaO composition of the rocks, as light gray rocks tend to be higher in CaO content than those of the white rocks at the lower zone. The pelitic components are also occasionally increased in white limestone than light grey one. $Al_2O_3$ is one of the most difficult content to remove during hydrothermal processes, so the interpretation that the limestone is purified together with hydrothemral bleaching, has little merit. The wide range (over 16 ‰) of ${\delta}^{18}O_{SMOW}$, smaller variation (within 2 ‰) of ${\delta}^{13}C_{PDB}$ are apparent in both the upper and lower zones, which indicate the Daegi Formation had been affected overall by hydrothermal fluids. The K-Ar isotopic age of hydrothermal alteration in the GMI limestone mine is $85.1{\pm}1.7Ma$. Gradual change from grey through light grey to white limestone is accompaned by lower oxygen stable isotope values, which is major evidence that the hydrothermal effect is the main process of the bleaching. Although the Daegi Formation has suffered from hydrothermal activity and increase in whiteness, there is no clear evidence demonstrating the relationship between bleaching and high purity of limestone. The purification of limestone has nothing to do with the hydrothermal activity in this area. Instead, it should be considered that the change of sedimentary environment related to see-level fluctuation which can prevent deposition of pelitic components especially $Al_2O_3$ contrbuted to the formation of the high purity limestone in the upper zone of the Daegi Formation. Considering the evidences such as increase in CaO content of limestone by depth, gradual change from calcite to dolomite at the lower zones, and occurring the high purity limestone at the upper zone, the interpretation of sequence stratigraphic aspect to the formation of the high purity Daegi limestone appears to be more suitable than that of hydrothermal alteration origin.