• NEWSLETTER 전기공업
• /
• no.97-15 s.184
• /
• pp.31-45
• /
• 1997

• JOURNAL OF ELECTRICAL WORLD
• /
• no.12 s.108
• /
• pp.18-22
• /
• 1985

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1999

In this paper, a method of canceling and suppressing differential-mode crosstalk-noise signals caused by non-uniform coupling between two transmission lines in UTP(Unshielded Twisted Paris) modular jacks is discussed. Differential-mode crosstalk-noise signals in balanced transmission lines in UTP modular jacks were suppressed by inserting auxiliary capacitance between balanced transmission line pairs which are located closely enough to be effectively coupled each other. To verify the effectiveness of the inserted capacitances, precisely calculated auxiliary capacitances were applied to 10 pin modular jacks which are used in local area networks at 100 Mb/s with unshielded twisted pair-cables. The NEXT(Near-End Crosstalk) losses were measured to prove its applicability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.623-625
• /
• 2013

This signal can be distributed using a single USB cable, computer, video, audio, USB, LAN, one USB multi-signal transmission system was designed and implemented. USB multi-signal transmission was implemented in order to convert a single DVI, audio, and multiple USB, LAN, USB signal converter modules. This USB DVI port supports up to 1920 * 1090 resolution. USB multi-signal transmission system by sending multiple signals into a single cable installation costs of the various cable and using the replication feature of the screen, will provide schools and institutes, etc., providing the convenience of the river, and the scalability of computer peripheral ports.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1588-1595
• /
• 2010

DVB-C2 is the next generation digital broadcasting standard which will replace the analog cable broadcasting. LDPC and BCH significantly increase performance of forward error correction and allows for the application of higher constellation. Additionally, DVB-C2 is based on OFDM instead of single-carrier modulation, which gives additional flexibility and robustness in typical cable channels. This paper will give an introduction to the DVB-C2 system and spectral efficiency of DVB-C2 compare with DVB-C. Finally, The the simulation which is using BICM and OFDM structure show the performance of the DVB-C2.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.25-27
• /
• 2002

종래 가스절연개폐장치용 제어 패널은 아날로그 제어방식으로 제어 패널의 시퀀스 제어회로를 계전기, 스위치, 카운터, 타이머, 파이로트 램프, 경보 표시장치, 케이블 등을 이용하여 구현한다. 그래서 제어 패널 내부에 각종 계전품과 케이블이 많이 필요하게 되어서 복잡한 것이 단점이다. 또한, 시퀀스 제어회로의 수정이 필요하면 계전품, 배선을 수정해야 하므로 제어 패널의 유연성이 낮다. 이것을 디지털 제어 패널로 대체하면 아날로그 제어방식으로는 구현하기가 어렵거나 불가능한 기능들을 쉽게 구현할 수 있으며, 시퀀스 제어회로의 수정이 필요하면 종래에는 계전품, 결선을 수정해야 했으나 소프트웨어의 수정만으로 가능하여 제어 패널의 유연성이 향상되며 제어기의 내부가 PCB 보드로 되어 있어서 제어 패널의 유지보수성이 향상되며, 종래에는 계전품 케이블을 이용하여 구현한 기능들이 소프트웨어로 가능하게 되므로 제어 패널의 배선이 많이 축소되어 조립 작업성이 향상되고 원가절감이 가능하다. 원격 통신기능이 가능하여 SCADA/REMOTE와 통신으로 연결되어 변전소 종합자동화에 적합하다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.166-171
• /
• 2002

폐자원의 재활용은 현재 미래산업을 발전시키는데 중요한 변수로 작용하고 있으며, 폐플라스틱의 경우 통신 케이블 덕트, 고속전철용 케이블 덕트, 선박용 구조체등 고부가가치 제품으로의 기술개발이 활발히 진행되고 있다. 폐 Polyolefin 계열의 수지는 성형가공이 적절한 MFI(Melt flow index)와 뛰어난 기계적 물성, 가공 성형성 등으로 인해 다양한 형태와 용도로 recycling되고 있으나, 재생시 다수 Grade에 의한 분별, 분리수거의 어려움, 상용성결여, 난연성 부재 그리고 70% 대의 기계적 물성 회복율로 인해 그 용도가 제한되고 있는 실정이다.(중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.642-649
• /
• 2011

In this paper, we present the analysis of the characteristics of advanced mobile communication base station with multi-band about power loss, power efficiency and carbon reduction considering cable power loss. The advanced mobile base station system is installed on the outdoor for Antenna and RF part, and then the power loss is reduced because the fiber optic cable is used between RF part and baseband part. If the cable power loss is reduced by 5 dB replacing an entire the advanced base station systems, annual power consumption is reduced total 49,038 MWh in the CDMA 20W, WCDMA 30W, WiBro 10W systems. Furthermore the advanced base station system of annual $CO_2$ emission is 20,832 $tCO_2$ compare to 65,878 $tCO_2$. Therefore the advanced base system is confirmed considering green IT technology for the advanced mobile communication base station.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.37-42
• /
• 2016

Highly efficient and environmentally friendly mechanical process was developed for the higher recovery rate and productivity in the recycling of waste jelly-filled communication cables. Only the simplest mechanical method was designed and built for a continuous process, further proved experimentally along with the addition of several parts such as brush-type rollers and scrappers. In this process, the recovery rate and productivity were 98% and 55 Kg/hr respectively. This process is thought to be simple but highly advanced method for the commercialization of green process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1597-1603
• /
• 2017

The incidence of fire in underground utility tunnel is lower than other fires, but the damage caused by fire can cause social loss due to social management paralysis as well as economic loss. Hereupon, this paper presents the results of an empirical test on the construction of the underground utility tunnel condition monitoring system using the leakage coaxial cable installed in the underground utility tunnel. For this reason, a verification test was conducted by connecting a inductive coupler 200 Mbps power line communication modem with insertion loss characteristics of $-6{\pm}2dB$ to the installed the leakage coaxial cable installed in the underground utility tunnel. As a result, We confirmed sending/receiving of IP cameras up to 500 m. Therefore, it is judged that it is possible to construct a condition monitoring system for underground utility tunnel by using the leakage coaxial cables installed in the underground utility tunnels without installing additional communication lines for data transmission.