• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.201-206
• /
• 2006

A SPST Switch MMIC which used for Microwave Switch Matrix(MSM) of communications satellite payload with multi-beam function has been designed and fabricated. New RE FET switch configuration has been devised to improve power characteristics and isolation. Input and output return losses are better than another switches reported previously for both On and Off states. The MMIC chips were fabricated in 0.15um GaAs pHEMT process and measured insertion loss less than 2.0dB and isolation more than 63dB in the frequency range of 3GHz$\∼$4GHz. Output 3rd order interceptpoint above 32dBm has been recorded and the value is very high even though the unit pHEMT has gate width of 0.2mm and only four pHEMT are used in the MMTC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.509-516
• /
• 2006

Satellite-Digital Multimedia Broadcasting(S-DMB) systems are single frequency networks which consist of a satellite and gap fillers. Though gap fillers are required to extend the coverage to NLOS(Non Line-of-Sight) area, the receiver performance can be degraded with a limited number of fingers due to the increased number of multi-paths. The paper proposes to use frequency domain equalizer(FDE) instead of conventional Rake receiver, where the guard interval is not considered in order to minimize the impact on the current S-DMB systems. Through a campaign of simulations, it is found that the proposed FDE is less sensitive to the number of gap fillers compared to the conventional Rake receiver, and can achieve a greater channel capacity in most channel environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.203-210
• /
• 2013

Majority of the wireless ad hoc routing protocols are proposed to find feasible routes without considering the network load, end-to-end link quality and bandwidth requirements of the application. Therefore, protocol may not provide sufficient quality of service (QoS) to a high speed traffic such as multimedia. In this paper, we propose a path-quality and bandwidth-estimation based routing protocol (PBBR) for the high quality multimedia stream that can meet the application's bandwidth requirements and find the best reliable route. The novelty of this protocol is to select a reliable path to respond the application's requirements based on available bandwidth at each intermediate node and end-to-end path loss ratio. Obtained results from the simulation demonstrates that our protocol can achieve sufficient performance in terms of throughput and end-to-end delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2533-2540
• /
• 2013

In multihop cellular network environments, the mobility of nodes is a major obstacle to find a reliable routing path between a mobile node (MN) and the access node (AN). Therefore, in this paper, we propose a fast and reliable neighbor discovery protocol that enables the fast and reliable neighbor discovery by considering the node mobility in the multihop cellular network. The proposed neighbor discovery protocol inhibits the transmission of unnecessary control messages to quickly find a suitable neighbor node (NN) and performs a priority-based access control to transmit control messages without collision in the order of NN desirable to be selected. Simulation results show that the proposed neighbor discovery protocol can discover the NNs faster than the conventional scheme and select a more reliable relay node although the number of neighbor nodes increases and the node mobility increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.499-509
• /
• 2005

The capacity of Satellite DMB(Digital Multimedia Broadcasting) system is limited mainly by the interference. So, to achieve the expected performance of Satellite DMB system and to minimize the interference from other Satellite DMB system, ACI(Adjacent Channel Interference) should be considered carefully. Satellite DMB system uses the Gap-filler for effective transmission in terrestrial environment, and the Gap-filler can use direct amplification or frequency conversion to satisfy the specific requirements. Therefore, amplified signal causes several effects on interference between System A(Eureka 147 DAB) and System E(ISDB : Integrated services Digital Broadcasting). In this paper, by using the outcome of system-level simulation considering the results of link-level simulation, we analyze the interferences between System A and System E under practical situation based on the exact parameters of ITU-R BO. 1130-4. We also propose the appropriate level of guard band and Cell Radius to optimize system capacity by adapting the spectrum mask given in the spec. and utilizing the interference analysis between System A and System E.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.444-454
• /
• 2004

To support diverse transmission requirements of multimedia applications, Quality of Service (QoS) should be provided in the Internet, where only the best-effort service is available. In this paper, we describe our recent effort on the implementation and verification of an extendable and flexible QoS allocation and resource management system based on the bandwidth broker model for realizing the IETF differentiated service (DiffServ). Focusing on the bandwidth issue over single administrative domain, the implemented system provides real-time resource reservation and allocation, delayed call admission control, simple QoS negotiation between sewer and users, and simple resource monitoring. The implemented system is verified by evaluating the performance of a resource-intensive application over the real-world testbed network.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.79-88
• /
• 2020

This study analyzes the issue of the supply of force of fire in the high-rise buildings, and proposes an efficient method to do so. The results are as follows. First, in terms of Detect fire, it is necessary to shorten force of fire supply time by diversifying fire alarms such as alarms, vibrations, and voices from outside, clarification of fire occurrence points, and marking of fire. Second, with regard to communication signals, strengthening the installation target of wireless communication auxiliary facilities, supplementing the installation of repeaters, and constructing a multicommunications network were proposed. Third, in terms of Decide action, it is necessary to supply firefighter and firefighting equipment with the method of crossing of a river in adjacent buildings. Fourth, in terms of Respond to site, helicopters and emergency elevators are used to assist in the supply of firefighting equipment using drones. Easy-to-break glass windows and identification marks are required in every floor. Finally, in terms of applying fire suppressants, water can be supplied by means of a helicopter adjacent to the structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.289-294
• /
• 2011

In this paper, we developed a phone call display system or "alimi" for displaying the received phone data at limited space that can not carry a mobile phone and and its validity was confirmed. It consists of a data communication application transmitting the phone data via bluetooth, a RF data repeater to extend the range of data communication, and a display system part for displaying the received phone data to the phone user. It has economy in terms of system installation because the implementation of the proposed system is simple and low cost installation is possible. As ordinary mobile phones users using the system can easily utilize it by downloading the application on the app. store, it has economy and convenience checking whether a call is received.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.131-137
• /
• 2014

The advent of various smart devices like smart phones and tablets has triggered the changes in information systems of medical centers. Especially, diversifying devices of clients and the need for N-Screen services increase necessities for sharing effectively information in medical centers. However, developing and managing clients for each OS like iOS and Android cost high and make it hard to provide seamless service through multi devices. Also, in the aspect of security it is necessary to share information between clients and health information systems. In this paper, we develop a smart health information client based real-time health information sharing framework. The developed client is based on hybrid app, that enables to share information in real time between N devices through health information sharing framework and to adopted to developments of various clients.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.65-72
• /
• 2003

In this work a 6-stage hybrid power amplifier which can be used for the wireless communication systems for MMC(hficrowave Micro Cell) and ITS wireless communication system is designed and fabricated. Ihe power amplifier's each stages was fabricated Hetero-junction Power FET of bare chip type and an alumina substrate with $\varepsilon_{r}$=9.9 and 15-mil thickness. The measured results of power amplifier module showed 33.2$\~$36.5 dB small signal gain, 33.0$\~$34.0 dBm output power at forward frequency (17.6 GHa $\~$ 17.9 CHz) and 36.0$\~$37.0 dB small signal gain, 33.0$\~$34.5 dBm output power at reverse frequency (19.0 GHz $\~$19.2GHz).