• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.483-490
• /
• 2015

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. It is shown that it is possible to do likelihood inference for software reliability models based on finite failure model and non-homogeneous Poisson Processes (NHPP). For someone making a decision about when to market software, the conditional failure rate is an important variables. The infinite failure model are used in a wide variety of practical situations. Their use in characterization problems, detection of outlier, linear estimation, study of system reliability, life-testing, survival analysis, data compression and many other fields can be seen from the many study. Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, proposed a control mechanism based on NHPP using mean value function of Musa-Okumo and Power law type property.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2007.04a
• /
• pp.187-195
• /
• 2007

최근 우리나라에서 도요타를 벤치마킹하여 TPS를 도입하는 회사가 늘어나고 있다. 다품종 소량생산의 Lean 생산방식을 적용하기 위해서는 셋업시간의 단축 뿐만 아니라 이에 따른 셋업 품질능력이 향상되어야 한다. 따라서, 공정을 셋업하는 작업자들에게 이러한 Complex Target & Control Chart를 적용한다면, 통계적인 지식 없이도 공정의 불량을 예방 할 수 있으리라 확신한다. 이러한 관리도를 사용하여 공정능력을 향상한다면, 일본과 같은 높은 수준의 공정능력을 확보 할 수 있을 것이다. 단, 본 관리도는 현장 작업자를 위한 불량예방을 위한 품질관리 도구이며, 공정변동을 관리하기 위해서는 엔지니어 측면에서 관리도의 활용도 병행되어야 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.65-70
• /
• 2001

This Paper Propose the control chart Pattern to provide a more comprehensive scheme for detecting process shifts using individual observations in start-up process. In this paper, which uses the backpropagation algorithm two samples are fed into the trained neural network to provide outputs ranging from 0 to 1. The main advantage of using neural networks approach with a control chart is that the neural network has almost no delay in detecting small shift. This paper illustrates how neural networks can provide a useful method for optimizing parameter(connection weights) that affect process control. Simulation results show that the performance of the proposed control chart using the neural network (NNCC) is quite promising.

• Journal of radiological science and technology
• /
• v.45 no.5
• /
• pp.439-448
• /
• 2022

The purpose of this study was to analyze the results from statistical process control (SPC) to recommend upper and lower control limits for planning parameters based on delivery quality assurance (DQA) results and establish our institutional guidelines regarding planning parameters for helical tomotherapy (HT). A total of 53 brain, 41 head and neck (H & N), and 51 pelvis cases who had passing or failing DQA measurements were selected. The absolute point dose difference (DD) and the global gamma passing rate (GPR) for all patients were analyzed. Control charts were used to evaluate upper and lower control limits (UCL and LCL) for all assessed treatment planning parameters. Treatment planning parameters were analyzed to provide its range for DQA pass cases. We confirmed that the probability of DQA failure was higher when the proportion of leaf open time (LOT) below 100 ms was greater than 30%. LOT and gantry period (GP) were significant predictor for DQA failure using the SPC method. We investigated the availability of the SPC statistic method to establish the local planning guideline based on DQA results for HT system. The guideline of each planning parameter in HT may assist in the prediction of DQA failure using the SPC statistic method in the future.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.161-168
• /
• 2013

지난 몇 십년동안 전 세계적으로 제조기술 분야의 급속한 성장으로 대부분의 제조업에서 눈부실만한 품질향상과 생산성 극대화를 이루어 왔다. 하지만 현재 제조기술 분야는 새로운 문제에 직면하고 있다. 실제 현장에서 관리하고자하는 품질특성은 정규분포를 따르지 않는 경우가 많은데, 대부분의 통계적 공정관리기술체계가 정규분포를 기반으로 하고 있다는 것이다. 이러한 이유로 비정규 공정에서 극소불량관리, 미세변동관리에 대한 연구가 시급한 실정이다. 하지만 비정규 분포를 통계적으로만 해석하고 설계하기 위해서는 현실적으로 한계가 있으며, 경제적 설계의 접근방법이 또 하나의 좋은 대안이 될 수 있다. 본 논문에서는 비정규 공정에서 관리도의 경제적 설계를 위한 연구동향을 살펴보고 추후 연구방향에 대해 제시하고자 한다.

• Journal of the Korean Institute of Gas
• /
• v.11 no.3
• /
• pp.56-63
• /
• 2007

These days, needs and wants of the customers are getting diversified and the market is also changing rapidely. Many organizations are now attempting change and innovation activities to improve products and service quality. This study was performed to apply 6 sigma tools for the efficient repair management of city gas supply equipment. Vital few factors, RISK factors, sigma values, root causes. and solutions were derived by 6 sigma tools. We are performing statistical process control for the new process. Six sigma for city gas supply equipment safety management enabled to improve the business management for efficiency by reducing variation and eliminating cost for quality.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.3
• /
• pp.507-514
• /
• 2005

In this paper we consider an operating methodology of SPC(statistical process control) system in the TFT-LCD industries. The main contents are real time process monitoring, significant difference test, outlying glass analysis, process capability analysis and chart viewing.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.319-326
• /
• 2013

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. It is shown that it is possible to do asymptotic likelihood inference for software reliability models based on infinite failure model and non-homogeneous Poisson Processes (NHPP). Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, we proposed a control mechanism based on NHPP using mean value function of logarithmic hazard learning effects property.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.539-547
• /
• 2009

현대의 산업은 점차 분야가 다양해지고 기술이 첨단화되며, 고객의 요구사항이 복잡해지고 있다. 이에 따라 제조업에서는 초정밀, 고신뢰도가 요구되어지고 있는 실정이다. 제조업 분야의 핵심 기술인 SPC기법 중에서 누적합(CUSUM) 관리도는 공정의 작은 변화에 대해서 민감하다는 특징 때문에 첨단 산업인 반도체나 화학공정 등에서 활용도가 높은 관리도 기법이다. 하지만 복잡한 이론 체계로 인하여 사용편리성이 떨어진다는 단점이 있다. 본 논문에서는 누적합 관리도의 이론적 전개에 관한 체계적인 조사연구를 통해 누적합 관리도의 복잡한 이론 체계를 이해하는데 도움이 되고자 한다.