• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.343-351
• /
• 2010

This paper proposes a new fuzzy speed controller based on the Takagi-Sugeno fuzzy method to achieve a robust speed control of a permanent magnet synchronous motor (PMSM). The proposed controller requires the information of the load torque, so the second-order load torque observer is used to estimate it. The LMI condition is derived for the existence of the proposed fuzzy speed controller, and the gains of the controller are provided. It is proven that the augmented control system including the fuzzy speed controller and the load torque observer is exponentially stable. To evaluate the performance of the proposed fuzzy speed controller, the simulation and experimental results are presented under motor parameter variations. Finally, it is clearly verified that the proposed control method can accurately control the speed of a permanent magnet synchronous motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2008

The direct torque control method of an inverter fed squirrel cage typed induction motor using fuzzy logic controller has been proposed. This method is suitable for the traction which requires a fast torque response during the star-up and step change. The fuzzy control algorithm based upon the control principles of conventional DSC(Direct Self Controller) is developed. The fuzzy algorithm is tarried out by defuzzification strategy of the fuzzy output extracted from the possibility distribution of an inferred fuzzy control rule. The flux and torque of an induction motor are estimated by the dynamic model of the rotor flux field-oriented scheme which has decoupling characteristics and excellent dynamic response over a wide speed range. The proposed controller shows a good dynamic response. Moreover, since the fuzzy controller possesses highly adaptive capability, the performance of fuzzy controller is quite robust and insensitive to the motor parameters and change of operation conditions.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.972-973
• /
• 2008

본 논문은 3상 2여자 방식의 출력성능을 개선하기 위한 새로운 통전각 확장방식에 관한 연구이다. 제안된 토크제어 방식은 정격토크 이하에서는 기존의 $120^{\circ}$ 통전 PWM 방식으로 토크를 제어하고, 정격토크 이상에서는 출력 증대를 위해 통전각 확장을 통하여 토크를 제어하는 새로운 토크제어 알고리즘을 제안하였다. 또한 PSIM을 이용한 시뮬레이션을 통하여 제안된 방식의 타당성을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1885-1891
• /
• 2010

Torque control of wind turbines is important when the wind speed is below the rated speed. The main objective of torque control is to extract the maximum power from the potential aerodynamic power of the wind. Torque control methods for wind turbines are classified as torque-mode control and speed-mode control. In torque-mode control, which is well known and traditionally used in many wind turbines, the torque demand of the generator is proportional to the square of the generator speed. In speed-mode control, a PI controller is used to generate the appropriate torque demand of the generator. In this study, the two torque control methods mentioned above are applied to a 2.75-MW wind turbine; simulation results for real turbulence wind speeds are presented, and the response properties are compared.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.36-41
• /
• 2012

This paper presents torque control of DC motor using the velocity profile based acceleration/deceleration controller for automatic guided vehicles (AGVs). This technique has some advantage; to reduce the damage of motors and to extend the life time of motors. First, we generate velocity profiles for three cases and design the state feedback controller using the generated velocity profile as a reference. The state feedback controller has servo system for solving regulation problem. For the verification, we apply the proposed method to control a cart position and shows some simulation result.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2658-2660
• /
• 2000

본 논문은 주파수역에서의 모델매칭을 이용하여 강인한 성능의 PID 제어기 튜닝법을 제안하였다. 이를 이용하여 부하토크 외란에도 강인한 성능의 BLDC 모터의 속도제어기를 설계하였다. 부하토크 외란이 존재하여도 주어진 기준명령을 강인하게 추종하도록 $H_{\infty}$ 제어를 이용하여 속도제어기를 설계한 후, 설계할 PID 제어계의 루프 전달함수와 설계된 $H_{\infty}$ 제어계의 루프 전달함수간의 오차가 주파수역에서 최소가 되도록 PID 제어기 파라미터를 튜닝하였다. BLDC 모터의 속도제어 시뮬레이션을 통하여 설계된 강인 PID 제어기의 성능을 평가하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.601-609
• /
• 2000

Direct torque control(DTC) of AC motor has the fast torque and flux dynamic responses even though it has very simple scheme to implement. However, DTC do not show good performance at low speed range with conventional open loop stator flux observer when stator resistance varied. Therefore, authors propose a new nonlinear stator flux observer in order to estimate the stator flux of induction motor at low speed and show its simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.708-714
• /
• 1990

This paper has proposed a self-tuning controller for tracking reference trajectory by measuring End-point of arm on robot manipulator whose link is light and flexibls, and proved the perforformance of the algorithm proposed through the computer simulation. As an object of control, a flexible robot manipulator with two-links was selected. As for structure of model, it utilized an assume mode shape method with include travity force and derived a dynaics equation by adapting two kinds of vibration mode of each.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.98-100
• /
• 2006

본 논문은 매입자석형 동기전동기 (Interior Permanent Magnet Motor, 이하 IPM)의 Sensorless 제어에 관한 것이다. IPM에서 벡터제어를 수행하기 위해서는 계자분 전류와 토크분 전류로 나누어서 제어를 해줘야 한다. 이때, 토크는 영구자석과 직교하는 방향으로 토크분 전류를 인가해줘야 하기 때문에, 영구자속에 의해 발생하는 자속의 정확한 위치를 알아야 하고, 그로 인하여 엔코더 등의 자극위치센서를 사용해야 한다. 따라서, IPM은 일반적으로 Sensored제어를 하게 된다. 그러나, 고가의 장치인 엔코더 등의 자극위치센서를 사용하지 않고 적절한 제어를 수행해주기 위하여 여러 sensorless 기법들이 개발되어 발전되었다. 본 논문에서는 자속추정기를 이용하여 자속을 추정하고, 이를 이용하여 모터의 회전속도 및 회전각을 추정함으로써 Sensorless제어가 가능하였다. 본 제어 알고리즘은 자사 벡터제어 인버터인 iV5를 통해 실험하여 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.297-302
• /
• 2002

The direct torque control(DTC) of induction machines has the advantages of a simple control scheme and a very quick and robust torque response and its application is extended in the traction field. However, some drawbacks of the conventional DTC strategy using a hysteresis controller are the relatively large torque ripple in the steady state and the variation of switching frequency according to the amplitude of hysteresis bands and the motor operating conditions. In this paper, a navel direct t()roue control scheme of induction machines based on stator flux control and Space Vector Modulation Is proposed to acquire the advantage of a fixed switching period and the minimization of the torque and stator current ripple in a wide speed range. The effect of proposed method has been proven by simulations and experiments.