• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.12-16
• /
• 2002

This paper deals with the measurement of machine parameters of inverter-fed induction motors for an accurate torque control applications such as machine tools and tension control machines. After discussing nonlinearities of both inverter and motor, this paper suggests appropriate compensation and measurement methods. The experimental results show the validity of the proposed method in the operating conditions.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1055-1056
• /
• 2011

This paper deals with optimum design criteria for maximum torque density & minimum current density of a single phase line-start permanent-magnet motor (LSPMM) using RSM (Response Surface Methodology) & FEM (Finite Element Method). The focus of this paper is to find a design solution through the comparison of torque density and minimum current density resulting from rotor shape variations. And then, a central composite design (CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.109-110
• /
• 2015

전기자동차 구동용 전동기는 고토크/고파워 밀도, 고효율, 넓은 구동속도 범위의 특징을 가져야 한다. 영구자석 매입형 동기전동기는 이러한 특성에 가장 부합하는 전동기 형태로서 전기자동차 구동용 전동기로 각광받고 있다. 하지만 강한 자속밀도를 얻기 위하여 희토류 영구자석을 사용해야 하고, 이는 생산단가의 절감문제, 고온에서의 비가역적 감자문제, 인버터 결함 시의 안전성 문제 등의 문제점을 갖고 있다. 이러한 문제들을 극복하기 위하여 전기자동차 구동용 유도전동기 설계를 제안한다. 유도전동기가 가지는 장점들과 함께 설계 시 고려해야 할 내용들을 제시한다.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2018

Electric motors for electric vehicles differ in efficiency characteristics depending on the operation modes, studies for evaluating high efficiency characteristics in low speed and high speed operation modes are very important. Therefore, it is necessary to design method that can change the high torque, high output density, and high efficiency characteristics of driving motors for electric vehicles. In this paper, the diameter ratio of stator and rotor for the interior permanent magnet synchronous motor is change of designed 0.62, 0.65, and 0.68, respectively, and the efficiency characteristics of the entire operation section, average efficiency characteristics of the city driving modes and express highway driving modes are analyzed. As a result of analyzing the efficiency characteristics of the entire operating section, it was confirmed that as the diameter ratio increases, the high efficiency section moves to the low speed and low torque section and the high efficiency section moves to the high speed and low torque neighborhood as the diameter ratio decreases. As a result of analyzing the average efficiency characteristics in the city driving modes and express highway driving modes, the average efficiency of 0.68 model is analyzed to be more efficient than the 0.63 and 0.65 model ratio, and it is confirmed that it is suitable for city driving modes and express highway driving modes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.107-115
• /
• 2003

PMSM(permanent magnet synchronous motor) are widely used in industrial and home appliance because of their high torque to inertia ratio, superior power density, and high efficiency For the high control performance, accurate information of rotor position Is essential. In recent, sensorless algorithms are much studied due to high cost problem of position sensor and low reliability in harsh environment. In the proposed method, a differential linkage flux is used for the estimation of rotor position. The differential magnetic field flux is calculated by the voltage equations and measured phase current without any integration and differential calculus. Instead of linkage flux calculation with differential operation, a new mathematical differential method is introduced by a-$\beta$ transformation. The proposed novel position sensorless speed control scheme is verified through experimental results.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.2
• /
• pp.47-52
• /
• 2017

In general industry, TFM(turbine flow meters) as measuring instruments having high reliability are widely used in the trade of petroleum and in the measurement of tap water and hot water. The TFM is performed calibration for using in the field and is mainly calibrated at room temperature. Since accuracy of TFM depends on Reynolds number of fluid, TFM is calibrated at same Reynolds number by changing flow rate. Furthermore, the TFM using a fluid of high temperature should have considered for other factors such as the thermal expansion of the parts and characteristics change is unknown changes in the turbine flow meter accordingly. In this paper, two turbine flowmeter are experimentally studied about characteristics change using the facilities which can change fluid temperature from 6 degree celsius to 90 degree celsius. As a result, the turbine flow meter can be calibrated to minimize the error characteristic at a similar temperature and the actual temperature.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.388-389
• /
• 2019

초박판 용접 기술인 CMT (Cold Metal Transfer) 용접을 위한 모터의 고정밀 정역동작 알고리즘 연구개발 결과를 본 논문에서 발표한다. CMT 용접 기술 구현을 위해 50W급 고정밀 속도 및 토크 제어가 가능한 맥슨모터의 EC-i40(BLDC 모터)을 사용하였고, DSP(TMS320F28069)와 모터 드라이버 IC(A3930)를 적용한 전용 제어 보드를 제작하여 CMT 동작 성능을 검증하였다. 실제 상용화되고 있는 용접전원장치(HF400R)와 본 논문에서 발표하는 CMT 기술을 연동하여 용접을 수행하면서 그 우수성을 확인하였다.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.55-62
• /
• 2006

Orthodontic mini-implants, despite its usefulness as anchorage, have some limits such as loosening. Therefore, various shapes and lengths have been studied. The aim of this study is to analyze the shape and length of mini-implants mechanically. The shapes of mini-implants (1.6 mm, Dual Top, Jeil Medical Co., Seoul, Korea) were cylindrical and taper. The lengths of mini-implants were 6 mm and 8 mm. The tested groups were 5 groups (cylindrical 6 mm, cylindrical 8 mm, taper 6 mm, taper 8 mm and taper 8 mm modified whose thread is reduced from the middle to upper part). All were inserted and removed on the polyurethane foam with the torque measured. During insertion and removal, the taper shape needed higher torque than the cylindrical shape, and the 8 mm length than the 6 mm length (p<0.001). The taper 6mm group showed superior insertion torque (p<0.001) and similar removal torque to the cylindrical 8 mm group. The taper 8 mm modified group with gradually reduced threads, showed continuous high removal torque after the peak. The initial mechanical stability can be provided by the tapered shape and also, affected by length and thread design.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.997-998
• /
• 2011

본 논문에서는 영구자석 동기전동기의 영구자석 평균온도를 다이나모 시험을 통해 얻어진 토크 데이터로부터 간접적으로 계산하는 방법이 제시된다. 특히 영구자석의 온도에 따른 잔류자속밀도 변화에 자기 포화 효과를 고려하여 다양한 운전점에서의 온도추이를 간단하고 정확히 계산할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.122-124
• /
• 2003

This paper deals with the magnetic field analysis and compution of cogging torque using an analytical method in high speed brushless motor/generator. The magnetic field is analyzed by solving space harmonics field analysis due to magnetizing distribution and the cogging torque is analyzed by combining field analysis with relative permeance.