• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.491-494
• /
• 1998

해양음향 토모그래피는 해수중을 전파하는 음파의 전파시간을 측정하여 이것으로부터 수온 및 유속의 분포를 구하는 새로운 관측기법이다. 해양음향 토모그래피에 의한 실시간 유속측정 시스템을 구축하기 위한 기초실험으로서 해양음향 토모그래피의 유속측정 유효성을 검증하기 위하여 쌍방향 음파전파의 해양음향 토모그래피 실험을 1997년 4월중에 거제도 남쪽해역에서 실시하였다. 실험시의 해양물리 환경을 고찰하고 토모그래피에 의한 유속측정 결과를 초음파 유속계(ADCP)에 의한 유속측정 결과와 비교 분석하였다. 그 결과 토모그래피에 의한 유속측정은 매우 양호하게 나타나, 향후 유속측정법으로 활용성이 크리라 기대되었다.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.43-48
• /
• 1998

Recently seismic tomography has been widely used to visualize subsurface structure for resource explorations and construction site evaluation. We studied a way to include fresnel zone concept in the conventional ray-based traveltime tomography. The algorithm developed uses the same order of computing time as the conventional traveltime to mography but incorporates the rigorous wavepath concept of wave-equation tomography. Some experiments to synthetic and real data show reasonable results compared to conventional ray-based traveltime tomography.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.100-100
• /
• 2010

토모그래피는 플라즈마 물리학뿐만 아니라 의료영상이나 천문학 등의 분야에서 오랫동안 이용되어 온 기법으로 직접 들여다 볼 수 없는 단면을 선적분된 데이터를 이용하여 국지적인 데이터를 재구성해내는 영상진단 방법이다. 플라즈마 물리학의 경우 공간적으로 검출기 배열을 균일하게 배치할 수 없으므로 토모그래피 기법에 균일화는 필수적이다. 이를 위해 본 연구에서는 Phillips-Tikhonov 균일화 방법을 사용하였다. Phillip-Tikhonov 균일화 방법은 인접한 픽셀 사이의 구배(gradient)를 최소화하는 방향으로 단면영상을 재구성하는 방식으로, 다른 토모그래피 알고리듬에 비해 훨씬 더 정확한 결과를 보여준다. 본 연구에서는 플라즈마의 공간분포 진단을 위하여 토모그래피 진단법과 부유탐침 진단법을 사용하였다. 플라즈마의 선적분된 방출광을 디지털카메라로 측정한 후 Phillips-Tikhonov 토모그래피 방법으로 재구성하여 플라즈마의 국지적인 공간분포를 알아내었다. 결과의 타당성을 확보하기 위해 부유탐침 진단결과와 비교 분석하여, 전자온도가 위치에 따라 일정한 상태에서 부유탐침을 통한 밀도분포와 토모그래피 진단법에 의한 플라즈마 방출광 세기의 공간분포가 거의 일치함을 확인할 수 있었다. 이를 통해 플라즈마의 국지적인 공간분포 진단을 위한 디지털카메라를 이용한 토모그래피 진단법의 타당성을 검증하였다.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.202-213
• /
• 2008

In this study, theoretical approach of 3D seismic traveltime tomography was investigated. To guarantee the successful field application of 3D tomography, appropriate control of problem associated with blind zone is pre-requisite. To overcome the velocity distortion of the reconstructed tomogram due to insufficient source-receiver array coverage, the algorithm of 3D seismic traveltime tomography based on the Fresnel volume was developed as a technique of ray-path broadening. For the successful reconstruction of velocity cube, 3D traveltime algorithm was explored and employed on the basis of 2nd order Fast Marching Method(FMM), resulting in improvement of precision and accuracy. To prove the validity and field application of this algorithm, two numerical experiments were performed for globular and layered models. The algorithm was also found to be successfully applicable to field data.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.92-116
• /
• 1999

Tomographic approaches to image underground structure using electrical properties, can be divided into DC resistivity, electromagnetic, and radar tomography, based on the operating frequency. DC resistivity and radar tomography methods have been recently applied to site investigation for engineering purpose in Korea. This paper review these two tomography methods, through the case histories acquired in Korea. As another method of borehole radar survey, borehole radar reflection method is included, and its inherent problem and solution are discussed, how to find the azimuth angle of reflector using direction-finding-antenna. Since the velocity anisotropy of radar wave has been commonly encountered in field data, anisotropic radar tomography is discussed in this paper. In DC resistivity tomography, two subjects are focussed, electrode arrays, and borehole effect owing to the conductive fluid in borehole. Using the numerical modeling data, various kinds of electrode ways are compared, and borehole effect is illustrated. Most of the case histories presented in this paper are compared with known geology, core logging data, and/or Televiewer images.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.66-71
• /
• 2011

The spray distribution at high pressure condition was measured by the Tomography method. The constructed spray distribution was compared with the images by Indirect Photography method so that the spray size confirmed and took the boundary of the distribution. It confirmed that the Tomography applies to construct the distribution at high pressure.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.141-146
• /
• 1998

동해 울릉분지에서 해양내부에 수온구조 파악을 위하여 수중 폭발성 음원인 SUS를 이용한 해양음향 토모그래피 실험을 1998년 8월에 실시하였다. 토모그래피 실험은 30, 60 km 반경으로 36개의 지점에서 항공기를 이용하여 SUS를 투하하고 관측해역 중앙에 위치한 선박에서 선배열수신기 (10개의 수신기 배열)로 수신하였다. 토모그래피 실험에 의한 역산 결과를 비교하기 위하여 AXBT를 이용한 수온관측이 동시에 수행되었다. AXBT 관측으로 울릉분지에서 자주 나타나는 난수성 소용돌이가 관측되었으며 이는 관측해역의 남동쪽에 위치하고 있으며 남서방향에서 북동방향으로 진행하는 형태를 보이고 있다. 음파의 도달시간 차이를 이용한 역산결과는 해양내부의 수온분포를 보여주는데 오차가 커서 새로운 해양음향 토모그래피 기법의 도입 필요성을 제시한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.39-44
• /
• 2011

This study constructed the spray distribution by the Tomography method at high pressure condition. The constructed spray distribution was compared with the images by Indirect Photography method so that the spray size was confirmed and took the boundary of the distribution. It was confirmed that the Tomography applies to construct the distribution at high pressure.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.184-190
• /
• 2004

To analyze soil properties of unsaturated zone, we applied electrical resistivity tomography(ERT) of high resolution image. From linear relationship with each soil texture between results of ERT and soil properties such as electrical conductivity of pore water, water contents and ionic contents, we could be analyzed the result of ERT more effectively. Consequently, ERT can be useful for estimating soil properties between the two holes and evaluating indirectly pH and organic contents of soil.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.263-271
• /
• 2008

3D seismic tomography technique was assessed for applicability of developed 3D tomography algorithm based on Fresnel volume in the dam-planned area. Reconstructed 3D tomogram based on Fresnel volume and Fast Marching Method(FMM) reveals similar velocity structure to the other geotechnical survey results. With the correlation analysis between RMR data and seismic velocity information, it could provide reliable information of rock mass rate. The applicability of 3D seismic tomography was verified in this study. It would be expected to apply 3D tomography with new developed first arrival calculation and inversion algorithm to the engineering field economically.