• Information Display
• /
• v.22 no.6
• /
• pp.46-49
• /
• 2021

• Journal of Educational Research in Mathematics
• /
• v.25 no.2
• /
• pp.189-206
• /
• 2015

There has been a recurring call for using visual representations in textbooks to improve the teaching and learning of proportional reasoning. However, the quantity as well as quality of visual representations used in textbooks is still very limited. In this article, we analyzed visual representations presented in a Grade 6 textbook from two perspectives of proportional reasoning, multiple-batches perspective and variable-parts perspective, and discussed the potential of the double number line and the double tape diagram to help develop the idea 'things covary while something stays the same', which is critical to reason proportionally. We also classified situations that require proportional reasoning into five categories and provided ways of using the double number line and the double tape diagram for each category.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.167-174
• /
• 2008

The application of tape is being widely used for treatment of the musculoskeletal disorders and injury prevention. The techniques of the tape application has been relied on empirical evidence in preference to the neurophysiological evidence. Thus, the mechanism of taping has to be elucidated further. In this study, we assessed the effect of the elastic and non-elastic tape upon the gastrocnemius ${\alpha}$-motor neuron excitability using the gastrocnemius H-reflex. The amplitude of the M-wave and H-reflex were measured across three conditions: before tape application, with tape and with the tape removed. No significant changes of the excitability of the ${\alpha}$-motor neuron were obtained across three condition, either in the elastic and non-elastic tape. This results were quite different with other recent studies, which needs to be explored further.

• Composites Research
• /
• v.29 no.4
• /
• pp.203-208
• /
• 2016

Metal and polymer sandwich composites, which are made of sheet metal sheath and polymer or fiber reinforced plastic core, have been reconsidered as an alternative to sheet metal due to their lightness and multifunctional properties such as damping and sound-proof properties. For the successful applications of these composites, the delamination prediction based on the adhesion strength is important element. In this study, the numerical simulation of the delamination behavior of polymeric adhesive tapes with metallic surfaces was performed using cohesive zone elements and finite element software. The traction-separation law of the cohesive zone element was defined using the fracture energy derived from peel mechanics and experimental results from peel test and implemented in finite element software. The peel test of the polymeric adhesive film against steel surface was simulated and compared with experiments, demonstrating reasonable agreement between simulation and experiment.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.32-40
• /
• 2002

This study was carried out to investigate the effects of rootball media and covering materials for air-layering on the rooting and growth responses of miniature tree material. The experiment was performed with Carpinus coreana Nakai in the vinyl-house condition. The covering material, jute tape increased the diameter growth at 1cm above the girdling part of the tree material. The combined use of the soil mixture of peatmoss and perlite(2:1, by volume) as rootball medium and jute tape increased the dry weight of current year leaves and shoots. The number of shoot shorter than 10cm and that of leaves from the shoot were produced more by using a sphagnum moss for rootball medium than the soil mixture. The use of jute tape shortened the period required for rooting and increased the number of fine roots and the total root dry weight at girdling part of the tree material. On the other hand, the number of long roots was produced more by using the sphagnum moss than the soil mixture.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.22-28
• /
• 2017

In-Bi-Sn alloy sheet has been used as a thermal fusible parts of secondary battery safety system. This study offers a simple process to make In-Bi-Sn alloy fusible parts. The process consists of two procedures, melting and sheeting by tape casting. 62.5 wt%-In 20.0 wt%-Bi 17.5 wt%-Sn (M.P. $92.4^{\circ}C$) alloy sheet obtained by tape casting was used as the thermal fusible sheet of thermal fuse system for mobile telephone. The performance test of the system was carried out in oil bath, and the fusible alloy sheet was melted and cut off at $95^{\circ}C$. This results confirmed the possibility that the alloy sheet obtained by tape casting can be usable as a thermal fusible parts of battery safety system. And this process can be applied as a simple process to recycle the In-Bi-Sn alloy scrap separated from the used thermal fuse system.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.111-118
• /
• 2018

In order to develop a local stiffness-variant stretchable substrate with the soft PDMS/hard PDMS/FPCB configuration consisting of two stiffness-different polydimethylsiloxane (PDMS) parts and flexible printed circuit board, a FPCB was bonded to PDMS using the acrylic-silicone double-sided tape and the interfacial adhesion of the PDMS/FPCB was evaluated. The pull strength of the FPCB, which was bonded to the fully cured PDMS using the silicone adhesive of the double-sided tape, was 259 kPa and the delamination during the pull test occurred at the interface between the PDMS and the silicone adhesive. On the contrary, the bonding process, for which the FPCB was bonded using the silicone adhesive to the PDMS partially cured for 15~20 minutes at $60^{\circ}C$ and then the PDMS was fully cured for 12 hours at $60^{\circ}C$, exhibited the remarkably enhanced pull strength of 1,007~1,094 kPa. With the above mentioned bonding process, the delamination during the pull test was observed at the interface between the FPCB and the acrylic adhesive of the acrylic-silicone double sided tape.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.35-45
• /
• 2011

This paper is to analyze the behaviors of tunnel support by TDR(Time Domain Reflectometry) sensor using electrical pulse. To analysis the behaviors of tunnel support, Copper tape as sensing materials was studied for on-site installation. Copper tape to the top of the glass tape, foam tape, and shielding the lower part was used electromagnetic shield sheet. For a high sensitivity to load and fill out the measurement noise emissions has been developed for the production of materials. This sensing material through the tunnel model tests for the change by surcharge load in TDR data were analyzed. Varing stiffness and support of conditions were determined the change of TDR data through PVC pipe tunnel section model tests. By comparing TDR data and finite element analysis, the behaviors of the tunnel support materials were analyzed qualitatively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.168-171
• /
• 2010

방송사에는 수십만 시간에 이르는 아카이브된 콘텐츠가 있으며, 수십시간에 이르는 콘텐츠가 매일매일 생산되고 있다. 이러한 콘텐츠를 고품질로 빠르고, 다양하게 서비스하기 위하여 방송 환경은 파일 기반의 테이프리스 환경으로 전환되고 있다. 이러한 방송 환경의 변화는 전통적인 콘텐츠 품질 관리에 새로운 이슈를 제기하고 있다. 테이프를 사용하는 전통적인 방송제작 환경에서의 품질검사 방식은 대량의 콘텐츠, 빠른 서비스 그리고 파일 기반의 환경에는 적합하지 않기 때문이다. 이를 해결하기 위하여 더욱 빠르고, 일관성있게 파일 기반의 콘텐츠 오류를 검사할 수 있는 자동화된 콘텐츠 품질검사 시스템이 필요하다. 본 논문에서는 방송환경에서 발생할 수 있는 다양한 A/V 오류의 유형에 대하여 정리하였고, 컨테이너와 A/V 에센스를 검사할 수 있는 자동화된 콘텐츠 품질검사 시스템의 구현에 대하여 기술하고자 한다. 컨테이너 검사는 헤더 정보에 포함되어 있는 메타데이터에 대한 검사이고, A/V 오류 검사는 에센스 내부에 포함된 블록 오류, 인터레이스 오류, 뮤트 등의 검사이다.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1100-1105
• /
• 2020

We investigated the driving force and the required charges for spontaneous reduction of metal nanoparticles (NPs) on a scotch tape induced by mechanochemical activation. The charges were analyzed based on anodic stripping voltammetry (ASV) of silver, which is proportional to the number of charge identities on the tape. The results supported that the driving force is mechanochemical radicals rather than ions in the light of the high charge density on the tape.