• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1472-1474
• /
• 2003

연소방지재(난연테이프, 난연도료, 난연seal, 난연레진, 난연보드 등)란 지중 배전케이블, 접속재 및 통신케이블 등의 외피에 화재확산 방지를 위해 도포하여 사용하는 것으로서 화재 시 발포하거나 단열의 효과가 있어 케이블, 전선 등이 연소하는 것을 지연시킨다. 따라서 본 평가 기술에서는 수직불꽃시험, 산소지수, 저 염소시험, 발연농도, 케이블 허용전류저감률 등 주 재료시험에 대한 시험방법을 검토하고 시험에 적용하여 시험 시 문제점을 도출하여 시험방법을 정립하고자 한다.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.88-88
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2402-2407
• /
• 2007

Heat transfer distributions and friction factors in square channels (3.5 ${\times}$ 3.5 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. Tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The rib height-to-channel hydraulic diameter, e/Dh, is kept at 0.057 and test section length-to-hydraulic diameter, L/Dh is 30. The twisted tape is 0.1 mm thick carbon steel sheet with diameter of 3.3cm, length of 90cm, and 2.5 turns. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. Each wall of the square channel is composed of isolated aluminum sections. The following conclusions from the experimental study were drawn as: 1) In the 4 heating wall channel with twisted tape inserts, Nusselt number based on bottom wall temperature is enhanced by 1.2 - 1.6 times if adding the axial interrupted ribs on the bottom wall only. 2) The twisted tape with interrupted ribs under the two-sided heating condition produces the highest heat transfer performance. 3) Friction factor data obtained for the square channel with twisted tape inserts plus axial interrupted ribs are less than those in the past publications for circular tubes with axial interrupted ribs and twisted tape inserts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1144-1151
• /
• 2009

Refrigeration systems can be incorporated with non-adiabatic capillary tubes to improve their efficiency. The non-adiabatic capillary tube is constructed by joining the capillary tube with suction pipe to allow heat transfer between them, which is called capillary tube-suction line heat exchanger(SLHX). There are various joining methods and they may influence the characteristics of the refrigeration cycle. The present work aims to analyze the effect of widely-used two joining methods on the refrigeration cycle. The results show that soldered SLHX has much less thermal resistance than tapered SLHX but slightly outperforms in terms of coefficient of performance(COP) and cooling capacity. The soldered SLHX increased COP and cooling capacity of a refrigerator by 5.09% and 14.77% while the tapered SLHX did by 5.05% and 14.75%, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.127.1-127.1
• /
• 2010

고체산화물연료전지는 고효율 및 무공해의 전기화학 에너지 변환장치로서, 최근 국내외에서 활발한 연구개발이 수행되고 있다. 특히, 고체산화물 연료전지 시스템의 조기 상용화를 위해 시스템의 작동온도를 약 $800^{\circ}C$ 이하로 낮추고 저가로 생산 할 수 있는 제조공정 개발에 대한 연구를 적극적으로 수행하고 있다. 본 연구에서는 고체산화물연료전지의 단위셀를 구성하는 연료극지지체 및 박막 전해질에 대해서 저가 양산의 테이프케스팅법 및 동시소성 공정, 그리고 연료극 지지체 전해질(anode-supported electrolyte)에 대한 공기극 페이스트 프린팅 제조공정에 대해 소개한다. 또한 고체산 화물연료전지의 제조공정 및 시간을 단축하기 위해 방전플라즈마 소결공법(SPS)에 의한 연료극 지지체 제조 공정, 단위셀의 성능 최적화를 위한 나노 스케일의 고성능 전해질 소재 분말합성 공정(crystallite size: 5~10nm, surface area : $100m^2/g$ 이상) 그리고 테이프케스팅에 의한 박막 전해질 제조 공정(thin film : $10{\mu}m$ 이하) 등 주요 단위셀 소재 및 부품의 제조공정 특성 그리고 단위셀의 전기화학적 특성(max. power density : 1.0 W/$cm^2$)에 대해 소개하며, 최종적으로 평판형 대면적 고체산화물연료전지(max. $20cm{\times}15cm$)의 단위셀 상용화 제조 기술 및 성능평가 기술에 대해서도 소개 할 예정이다.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.209-216
• /
• 2016

Latent fingerprint left on the adhesive sides of tapes can be easily found at a crime scene. Small Particle Reagents(SPR) based on iron oxide($Fe_3O_4$) is a technique for the detection of a latent fingerprint adhesive surface. In this study, found out that the causes affecting the quality of the fingerprints developed when used SPR based on iron oxide. To a suspension of 0.5g of iron oxide in 100ml of distilled water, 0.5ml or more surfactant were added can be developed latent fingerprints of good quality. In addition, using surfactants HLB(hydrophile-lipophile balance) value of 11~18 showed good contrast to the background and latent fingerprint.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.93-97
• /
• 1999

In order to lower the surface energy of unsaturated polyester(UPE) resin, small amount of siloxane-ester copolymers were incorporated. The copolymers were synthesized by a condensation polymerization using ethylene glycol and hydroxy termintated polydimethylsiloxane as diols and maleic anhydride and phthalic anhydride as dibasic acids. The modified UPE resin surface was characterized by dynamic contact angle (DCA), peel strength measurements of pressure sensitive adhesives and X-ray photoelectron spectroscopy(ESCA). As the copolymer content in the blend and PDMS content in the copolymer are increased, both advancing and receding contact angles against water are increased. The strength required to peel-off the pressure sensitive adhesive tape from the modified UPE resin decreased dramatically with the addition of the copolymer. ESCA results indicated that polydimethylsiloxane segments are predominated at the outer surface of the modified UPE resin.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1319-1329
• /
• 2012

AGVs are more and more utilized nowadays and magnetic guided AGVs are most widely used because their system has low cost and high speed. But this type of AGVs requires high infrastructure building cost and has poor flexibility of navigation path layout changing. Thus it is hard to applying this type of AGVs to a small quantity batch production system or a cooperative production system with many AGVs. In this paper, we propose a vision based guideline interpretation technique that uses the cheap, easily installable and changeable color tapes (or paint) as a guideline. So a vision-based AGV with color tapes is effectively applicable to the production systems. For easy setting and changing of AGV navigation path, we suggest an automatic method for interpreting a complex guideline layout including multi-branches and joins of branches. We also suggest a trace direction decision method for stable navigation of AGVs. Through several real-time navigation tests with an industrial AGV installed with the suggested technique, we confirmed that the technique is practically and stably applicable to real industrial field.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.306-316
• /
• 2003

When a cinema being composed of 24 frames/sec is converted to NTSC video or TV program, several fields we repeated to have 60 fields/sec, which is called the telecine or 3:2 pull-down. Hence, when encoding the telecine NTSC video into MPEG format, if we convert it into the original 24 frames/sec Progressive cinema, then we can save 20% of bits compared to the case of encoding all the 60 fields. In this Paper, we propose an algorithm for performing the inverse telecine by using the properties of the frames. Specifically, the algorithm exploits the fact that there Is much Inconsistency between the even and odd fields in the case of telecine frame, which results in high magnitude at the Nyquist frequency In the vertical direction. The experiment shows that the proposed algorithm performs very well regardless of the quality of video with a very few computations, whereas the conventional motion based method requires much computational complexity and its performance is degraded when the video is of low (eg. VHS) quality.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.2
• /
• pp.75-81
• /
• 2020

PURPOSE: The purpose of this study was to investigate the effect of taping method using elastic tape and non-elastic tape on pain, grip strength and muscle activity in middle-aged female patients with lateral epicondylitis. METHODS: The subjects were 40- to 50-year-old female patients with lateral epicondylitis. A total of 22 subjects were divided into two groups, and each group had 11 patients. The intervention was carried out three times a week for 4 weeks. One group applied tape using elastic tape (ETG) while the other group applied tape using non-elastic tape (NETG). The measurement factors were pain, grip strength, and muscle activity. Pain was measured using VAS. Grip strength was measured using a grip dynamometer, and muscle activity was measured using EMG in the affected extensor carpi radialis brevis. Changes in interventions were compared among the groups using a paired t-test. The comparison between groups compared delta values (Changed values) between pre- and post-intervention using an independent t-test. RESULTS: In both groups, there was a statistically significant decrease in VAS. However, there was no statistically significant decrease in the delta value of VAS between ETG and NETG. In both groups, grip strength and muscle activity increased after intervention. There were statistically significant differences in delta values between ETG and NETG. CONCLUSION: Taping is a good intervention method for patients with lateral epicondylitis. Both elastic tape and non-elastic tape were effective. In particular, taping using elastic tape is an effective method for improving muscle function with pain reduction.